I get an error when Imessage trying to update IOS on C2940

When I try to update the IOS from 12.1(13)AY to 12.1(22)EA4 using CNA I get an error message like this: ERROR: Image requires 0x02000000 bytes of DRAM;only 0x01000000 bytes are present
I what the error message says but how do I solve the problem with the DRAM

No I have not checked the IOS version requirement but I have a similar c2940 where the upgrade was no problem.
Here is the sh ver output:
Cisco Internetwork Operating System Software
IOS (tm) C2940 Software (C2940-I6Q4L2-M), Version 12.1(13)AY, RELEASE SOFTWARE (fc3)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 26-Jun-03 18:33 by antonino
Image text-base: 0x80010000, data-base: 0x805BA000
ROM: Bootstrap program is C2940 boot loader
31-kjeller-adm uptime is 8 weeks, 6 days, 1 hour, 40 minutes
System returned to ROM by power-on
System image file is "flash:/c2940-i6q4l2-mz.121-13.AY/c2940-i6q4l2-mz.121-13.AY.bin"
cisco WS-C2940-8TF-S (RC32300) processor (revision B0) with 20778K bytes of memory.
Processor board ID FHK0806Y07R
Last reset from system-reset
Running Standard Image
9 FastEthernet/IEEE 802.3 interface(s)
1 Gigabit Ethernet/IEEE 802.3 interface(s)
The password-recovery mechanism is enabled.
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0F:24:50:CE:40
Motherboard assembly number: 73-8783-05
Power supply part number: 341-0085-01
Motherboard serial number: FOC08051PPK
Power supply serial number: HIC0802020C
Model revision number: B0
Motherboard revision number: A0
Model number: WS-C2940-8TF-S
System serial number: FHK0806Y07R
Configuration register is 0xF
Ole Martin

Similar Messages

  • There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

    There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Any one know what error -5000 is?  I get this error when I try to update to IOS 5 on my 3gs phone.

    Any one know what error -5000 is?  I get this error when I try to update to IOS 5 on my 3gs phone.

    I am also facing the same issue.
    four days back, my power buttton stopped working.
    Then my sim card slot stopped reading like it was stuck at gsm/cdma band.
    Even without simcard it said searching..
    then I changed the power button and antenna strip myself as my iphone5 is uk ee and i live in india.
    Everything was fine and I booted the phone.
    The power button worked like a new device... but the searching problem still remained.
    I hard resetted my phone but to no vail. even Find My phone was not turning off.
    then I forced my phone to recovery mode and downloaded iphone5,2 7.0.2,11A501_restore.ipsw from web and flashed it.
    At the start it recognised and everything was good until the "restoring iphone firmware" was stuck at the end point.
    I tried every trick on net. Even tried to downgrade.. but it was blocked.
    at the last it is either stuck at firmware or itunes unknown error (3)
    Please somebody help me to recover this PAPERWEIGHT to a phone again...

  • Getting an error message while trying to update Adobe AIR.

    I keep getting this error message while trying to update Adobe AIR:
    Sorry, an error has occurred.
    This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.
    *Please help me resolve this issue.

    Sundeep, I'm getting the same message.
    I'm on OS 10.5.8
    I've downloaded the Adobe AIR Installer, but the installer always indicates that it will update Adobe AIR
    Installed: 1.5.2.8870
    Update: 1.5.3.9130
    A spotlight search for these two log files produces nothing.
    I also followed your instructions here:
    Double-click the Terminal application located at /Applications/Utilities/Terminal.
    Type cd /Users/userName.
    Type echo > .airinstall.log and/or echo > .airappinstall.log "
    But terminal replies with "No such file or directory"

  • I get an error when I try to update airport

    Iget an error when I try to update airport

    What do you want to do with your AirPort, and what kind is it (Extreme, Express, Time Capsule)?

  • I get an error when I try to update to version 7.0.4 on my iPad 2

    When I try to download the software update to 7.0.4, I get a error message saying there was an error downloading the software.

    Have you tried updating with iTune (tap to enlarge image)?

  • HT4972 I'm getting and error message while trying to update to ios6, what should I do?

    I'm getting and error message when I'm trying to update to ios6? What can I do?

    How are you trying to update?  You can't do it with wifi.  The easiest and safest way, is to open iTunes and don't connect the phone.  Download the update and connect when it is complete.

  • Why am I getting an error when I try to update my Airport software?

    I'm trying to update my using Airport Utility software and I get the error that it can not find the airport.msi file? I've looked for the file on my PC and on the original install disk and can't find it? What am I doing wrong or is this an Apple issue?

    Hello,
    I can't uninstall it, can't repair it, can't even down load from the apple site the latest version and install without it looking for this apple.msi. I tried to update the firmware, and now the Airport Utility will not even work!
    Very frustrating. I am connected to the Internet via it. But this still doesn't make sense.

  • I get an error when i try to update the latest update

    For the last month, I have tried to update after affect latest update, but every time i try to install it ,i get a error that the download has failed

    You may try downloading the update using below link and try updating it manually by Running the dmg file.
    http://prodesigntools.com/swupdl/updates/oobe/aam20/mac/AdobeAfterEffects-13.0.0-Trial/13. 0.2/setup.dmg
    Then Quit and re-launch Creative Could App check if it showing up to date.

  • Unrecoverable Error when iTunes tries to update contacts from Outlook

    Has anyone else encountered this problem? In the past I have always updated my 60Gig iPod with my contact info from Outlook. I have never had a problem until today. Now when I update my iPod, all the music updates appear to download correctly, but when the process gets to the part when outlook contacts are updated, I get an unrecovereable error and iTunes shuts down. I have resolved the issue by turning off the update from Outlook. Just to make this a little more interesting, the error only appears to occur when outlook is already open. When iTunes has to open Outlook as part of the update process the error does not occur.
    I have already deleted and re-installed both iTunes and quicktime from the apple website but this didn't fix the problem. Furthermore, my iPod is at the most recent firmware level. Not sure what else to do here...
    I would like to report the problem to Apple, but I can't find a link to report bugs? Any suggestions?
    Thanks
    Grant
    Dell   Windows XP Pro  

    I don't know where the report bug button is, but if you find it you should only use it if you are sure the problem is with iTunes and not Outlook. If Apple can't fix it, then they can't.
    A possible fix (if you are willing to always eject) is to enable disk use and then manually move the vCards into the contacts folder.

  • HT4528 I keep getting an error when I try to update the software.  My phone won't work.  What is going on with it?

    I received notice that my phone had a software update.  When I tried to do it, it said there was an error.  Now I can only connect to the Wifi at home or if a store has a guest account.  I can't make calls or receive calls.  My text won't work.  I am so confused.  How do I fix my phone??

    Hello mjlamonea
    If the update had an error, then check out the article below to restore your iPhone. It will walk you through putting your iPhone into recovery mode and then using iTunes on your computer to restore it. If you have a back up through iTunes or iCloud, then your can put that back up back on after you have completed the restore.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • A gear error when i tried to update to 9 itunes

    i have vista.. when i tried to uprade to 9itunes it completely destroyed my itunes.. when i tried to reinstall it it gave me an error saying """""""unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the ear driver set is scheduled to be deleted during the next system reboot. Please Reboot the system and run iTunes again.""""""" i tried all that and i have no freaking clue what this means... all i have is installtion. i dont even have anything from itunes on my computer

    Excellent news.
    Mercifully, this particular error is rarer than it used to be a few years ago. I'm hoping that that means the more recent versions of the GEAR drivers are less prone to this sort of thing, and so fingers crossed this one shouldn't crop up for you again.

  • After upgrade to lastest version af iTunes (10.3.1, I believe), I get this error, when iTunes runs the update of my iTunes library

    I get this error message from Windows: Instruction af 0x76f8de2d referred memey at 0x000000ca. Memory could not be written.
    The iTunes stops working.
    I am running Windows Vista with lastest updates from Microsoft. My iTunes folder is located on a QNAP nas drive.  I have around 58500 podcast, about 15 CDs, some iPhone apps in my iTunes folder.
    What do I do?

    That's most likely a problem with a library file or a content file, Per.
    I'd perhaps try a library recreation first. There's advice for both types of issues in the User-specific troubleshooting section of the following document:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • HT1218 I get an Error 6721, while trying to update Airport Express. Solutions?

    Tried to update my AirPort Express to 7.6.1 and got he error 6721. Anyone kno what that is and how toget around it? Thanks!

    It should restore from the backup. If you don't have any backup then you will lose data but what you going to do you have no other alternative so go ahead and do it.
    Allan

  • Error 3194 while trying to update ios

    I'm trying to update my ios from 4.1 to the newest one but each time i try to do it, I get an error message 3194, I tried to trouble shoot by turning off my virus protection as well as delete and reinstall itunes but nothing works which was suggested by the FAQ's from itunes. The last time this happened i got a replacement from apple because i was within my warenty period but now I don't have that luxury. Can someone please help me try and figure out how to resolve this problem??

    "This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw."

Maybe you are looking for

  • Merge field won't display if number is 0.00

    When the value 0.00 is brought into the word document via merge field, nothing displays.  If the value is greater than 0.00, it displays that value.  Is there way to display the 0.00?

  • Using HTTP basic auth in WebService

    Hi, I am writing a flex app that needs to talk to a pre-existing SOAP web service. Unfortunately the web service uses http basic auth to authenticate a user. I am trying to figure out exactly how this is accomplished but I cannot find any substantive

  • Canon EOS 7D images soft

    Hi, I am experiencing soft , lackluster images with my Canon EOS 7D with a EFS 17-55mm lens. Perhaps this is operator error, however I'm wondering if the focus of light settings are out of wack. I would expect tighter focus overall. No matter what I

  • Need help with cannon RAW photos

    Please help- let my employee go and nearly 100 photos of my products were left on my hard drive, but I can not get them to open.  They are somehow jacked up (show a different icon than they did).  They have no previous version, and absolutely NOTHING

  • Issue with GetSchema("Columns") of Oracle driver from ODBC DSN

    Hi, I have installed Oracle Express Edition and have created a windows System DSN for Oracle driver 'Oracle in XE'. From my .Net application using ODBC connection string, I am trying get the schema of columns of a particular table in Oracle DB and th