I get an error when logging in (404 Not Found)

Every time I login I get this Message.

Hey Liam, I finally figured it out. It was trying to log me in to the wrong site. Thanks for trying to help though.

Similar Messages

  • Error when sending message: 404 not found

    Hi,
    New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
    In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
    "Error when sending message : 404 not found"
    Also tried in Adapter Engine and the result same.
    Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
    Any idea's?? what might be the issue????
    Thanks,
    Venu.

    Hi Venu,
    "404 is a not found error", plz make a check of  your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
    Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
    http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
    Select XI Adapter Framework.
    Thirteen associations have to be registered.
    (Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
    If you can't find all the associations, then you will have to create the associations manually.
    This is a very good blog which answers ur question:
    check this weblog
    https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
    Regards,
    Vinod.

  • RWB:Error when sending message: 404 Not Found

    Dear all,
    "i am getting error:      Error when sending message: 404 Not Found"
    while testing from rwb > Component Monitoring   > Non-Central Adapter Engines >  Adapter Engine AIPID > test message >
    with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
    sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
    and my id comm channel > target host > bid.xxx.com with service no
    (adapter type: xi
    adapter engine: Integration server
    address type: url address
    target host: bid
    service no: 8000
    path: /sap/xi/engine?type=entry
    i am working in nw2004s system)
    while testing cache connectivity test from rwb > Component Monitoring 
    i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
    green: Integration Repository
    green: Integration Directory
    green: Integration Server - JAVA
    red:Adapter Engine af.axd.aipid
    yello:Integration Server - ABAP
    Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
    [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
    [Data Evaluation]: GlobalError
    though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
    what should i do?
    best regards,
    dushyant.
    refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
    and
    SXI_CACHE
    @8O@ Error during last attempt to refresh cache
    LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
    Smq2 = 0
    Sm58 = 0

    Hi,
    If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
    http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
    For your error, refer to the following threads:
    Unable to find an associated SLD element
    Unable to refresh cache contents in XI.
    Unable to find an associated SLD element
    Cheers
    Manish

  • HTTP Connection to R/3 System error- HTTP/1.0 404 Not found

    Hi,
    I am using a HTTP connection to XI to extract data from R3 to XI. The HTTP connection I have created in R3 are getting an error - "HTTP/1.0 404 Not found" while testing the connection.
    Porperty maintained in the connection:
    Terget host = <XI server address>
    Service No = 8000
    Path Prefix = /sap/xi/engine/adapter_plain?
    The exchange profile in XI (PI 7.0) system is as follows:
    com.sap.aii.connect.integrationserver.r3.httpport = 8000
    HTTP port is set as 8000 in SMICM services.
    The same type of connection is working fine in the lower PI and R3 environment but failing on productive  system.
    Thanks for your help.
    Regards

    Hi,
    Well... you are trying to configure a HTTP RFC destination in SM59, aren't you?
    Dont worry about that. It is just a warning. Click on return or space bar after typing path prefix.
    Then save and test the connection.
    Carlos

  • I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

    I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

    Hello there, Minig1501.
    The following Knowledge Base article has some information on the message you're receiving:
    Unable to use Apple Push Notification service (APNs)
    http://support.apple.com/kb/TS4264
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • When downloading itunes software i get an error message:'apple apllication support not found"

    when downloading itunes software i get an error message:'apple application support not found'...error2 (windows error2)

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application, won't install normally.
    tt2

  • Activity log for bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found) did anyone find a fix for this? Thanks, Edie

    bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found)
    Apparently the profile .default is missing. Therefore the bug 278860 is activated and I can't start Firefox. Is there a solution?

    I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

  • Problem with Home Sharing.  Getting the error "The Requested URL was not Found on this Server"

    I recently purchased an iPhone 5.  As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing.  My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake.  All of these videos work fine on all devices in my home except my new iPhone 5.  When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
    Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
    I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
    Does anyone have any ideas as to what's going on?

    Can you see if you can view index page from a browser on iPhone.
    Have you seen live streams working from a different computer...
    if not then check if a proper crossdomain.xml file in its place(webroot folder).

  • Why do I get server error when logging into Icloud on my pc

    Why do i get server error when i try to log into icloud control panel on my pc

    document.write(''); document.cookie = 'CTINC=1; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'SiteStamp=XXDtZ12Ou3WtAF; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'Persistent_id_XXDtZ12Ou3WtAF=0BD14F766ACA:1318308966; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/';

  • Getting idoc error - Entry in outbound table not found- in outbound scenari

    hi,
    while generating idoc for outbound idoc to file scenario - i am getting error
    "Entry in outbound table not found" (29 - error in ALE service)
    Diagnosis
    No partner profile (outbound parameter) could be found using the following key:
    /C100/KU//WP_EAN////
    This refers to the key fields in table EDP13:
    RCVPRN  Partner number
    RCVPRT  Partner type
    RCVPFC  Partner function
    MESTYP  Logical message
    MESTYP  Message code
    but already entry has been maintained in partner profiles for the corresponding message.
    same setup is working for other message types. pls let me know what might be the problem

    Hi,
    Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
    Regards,
    Sreenivas.

  • I am getting an error that the file is not found when I sync my photos on my 3gs phone

    I am trying to update my phone with my new pics and when I tried to sync it I am getting an error message that states the Iphone cannot be synced because the file cannot be found. How do I correct this I have an Ipad and I dont want to try syncing it till I get this error fixed with my phone

    Try deleting what is called the iPod photo cache from your computer's hard drive.
    http://support.apple.com/kb/ts1314

  • Getting authorization error message: Required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

    I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."  And I have no idea of where or how to fix this issue.  Any help or suggestions will be greatly appreciated.  I even tried to deauthorize this computer and got the same error message.  HELP!

    I used Terminal to change the permissions on the folder in question.  I followed the instructions in this article:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one.   I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable.  So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal.  Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal).  I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.)  And it fixed the problem right away.
    What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do.  It didn't mention Terminal.  What would really be helpful is if Apple included a link to a page like this in their error message.

  • I get an error message 7-Zip file not found

    When I am trying to download Mozzila I keep getting an error message that states 7-Zip file not found and it won't let me download the browser.

    Hello psimonsen, you don't need 7-zip program to download official firefox, see: [https://support.mozilla.org/en-US/kb/install-firefox-windows Install Firefox on Windows]
    another official link : http://www.mozilla.org/en-US/firefox/all/
    thank you

  • Whilst downloading new version 11.1.4.62 yesterday Itunes stopped working and I now get an error message MSVCR80.d11 was not found. I have uninstalled I tunes and reinstalled it and Ihave also taken the recommned patch to recover the MSVCR problem.

    I was using my Dell PC (Windows Vista) on the 24th January 2014 and I was lstening to music via my Itunes programme. a window appeared alerting me to the need to take the new 11.1.4.62 Itunes update.
    I should have stopped Itunes and then installed the updated programme but absentmindely I cliked on the upload icon.
    Everything carried on as normal unitl around 70% the way through the upgrade when Itunes stopped working.
    An error message appeared 'Itunes Helper exe - Unable to locate component. This application has failed to start because MSVCR80.d11 was not found.' i was advised to uninstall and reinstall Itunes as that may fix the problem.
    It didn't!
    I then researched this issue on Google and was advised that if the reinstall of Itunes didn't resolve the issue I should download and install Microsoft Visual C++2005 Service Pack 1 Redistributable Package MFC Security Pack and run it. Did this and reinstalled Itunes again. Still doesn't work.
    Where next?

    Yes I have had the same problem today. Wish I had`t bothered to carry out update as everything was ok before.

  • Anybody else getting an error when logging in?

    When try to login trhough the forums, I get some stupid error message.
    (No, I didn't bother to copy it down. BIte me.)
    I have to login through the bug database.
    Anybody else?

    Another funny thing is that if you log-out, closethe
    tab, re-open forum.java.sun.com in a new tab, youcan
    simply press login to login again. No username or
    password needed. =)God i thought i was the only person having the
    trouble.I have just explained the solution for this
    problem.That's not a solution. It's a workaround.

Maybe you are looking for