I get an error when running adobe downloader

I am not able to run adobe downloader (in order to install a trial version of Photoshop Elements 13). I'm running windows 7, have administrative privileges, have tried on both Firefox and Internet Explorer. The message: Sorry an error has occurred. This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance. I've downloaded the installer several times, in case there was a glitch. Anyone else have this problem?

Debofca please see Trial for Acrobat Pro: download fails as file is corrupted where this topic was just discussed.

Similar Messages

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before

Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC

I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!

Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download i

I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download it?

In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?

Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.

TS3274 I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine.

I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine. Help!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I keep getting unknown error when trying to download apps

Does anyone know why I keep getting unknown error when trying to download apps?

does it says anything else than unknow error?
try going to settings>store, click on apple id and then sign out. Restart iphone and sign back in and try downloading again

I am getting an error when trying to download new iTunes software to new Windows 7 computer.

I am getting an error when trying to download iTunes to a new Lenovo laptop with Windows 7. Says... An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="86". HRESULT:0x80070BC9
Please help if anyone knows how to fix or bypass this problem.

These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time?

I get an error when I try downloading files - 8520 Curve

I get an error when I try downloading files with my 8520 curve...and they say must contact my webmaster

Hello !
Could you please be more elaborative for explaining your issue?

Why am I getting Run-time menu error (Error 88 occurred at One or more illegal menu item index in...) in my built application (single .exe) , but don't get any error when running/debugging it?

I am using LabVIEW 6.02 & also downloaded the application builder patch. For my runtime menus, I've a subVI that first calls "Delete Menu Items.vi" to get rid of the standard menu items and then "Insert Menu Items.vi" to add my own. I only get an error when I try to run the built application.

There was a similar issue in LabVIEW 5.0 where you would get the error if you passed an empty array to the 'items' input of Delete Menu Items. This was corrected in version 5.0.1. Did you mass compile your VI's after upgrading to version 6.0.2?
I tried to reproduce the problem in a small VI but was not successful. I can run an executable built from this example without any problems. I am attaching it for you to test.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect
Attachments:
menu.llb ‏33 KB

Getting an error when running OPENROWSET on remote SSMS

Hi!
I'm getting an error when I execute OPENROWSET command
from a remote SQL Server Management studio. But has no problem when directly execute the command on our database server.
Msg 7303, Level 16, State 1, Line 2
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".
Is there anything I need to enable or configure?
Thank you in advance for your help!

OK, this is the information that we need.
"It is already opened exclusively by another user, or you need permission to view its data."
Please check those 2 options:
* "already opened": at time the connection is ot working try to open the file localy with the excal application. If the file is in used then the excel will promp about this. If it is not give you any error localy then
try again from remoe (since the excel might take control if the connection is opened but not in used by remote connection). If you get that this might be the problem pls repeat this several time to make sure.
* "you need permission": This is much more common situation
>> By default, when you use OpenRowSet to remote server it's the SQL Server Service user that needs access to the file. This is why lot of time it work ocaly and not from remote. check the service's user's permission.
You can change the SQL server to run as a AD user (with the security implications it has) and then give that user access to the file on the network
>> You are trying to use a share network folder. check thi link:
http://technet.microsoft.com/en-us/library/ms175915.aspx
"To use BULK INSERT or INSERT...SELECT * FROM OPENROWSET(BULK...) to bulk import data from another computer, the data file must be shared between the two computers. To specify a shared data file, use its universal naming convention (UNC) name, which takes
the general form"
>> check this link as well:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ac615f7e-a4af-44d9-8bba-8e5c20be3c76/using-credentials-with-openrowset?forum=sqlintegrationservices
>> make sure that you use the right provider. Are you using 64 bit or 32?
[Personal Site] [Blog] [Facebook]

Why am i getting an error when trying to download ios6

Why am i getting an error when trying ios6

I have no idea. Don't think anybody else will be able to figure it out either from the information you have provided.
Might help if we knew the error message and/or number. It is a start anyway.

TS3212 running windows 7 64 bit home premium edition, getting installer error when attempting to download itunes

I'm running windows 7 64 bit home premium edition, getting installer error whenever I attempt to download iTunes. Cannot resolve despite every attempt known to man! Help!

I'm having the same problem and this is my error message:
what do I do?

Getting an error when running Preflight to embed fonts in Acrobat Pro version 9

I am running Acrobat Pro version 9.4.5 and when I am running a pre-flight for embedding fonts in my document I am getting an error message as follow: "
An unexpected error has occurred during the Fixup process ".
This is occuring at the font processing time. Anybody encountered the same issue.
One detail which has it importance, I am using TTF fonts and some specific Adobe fonts which are located in the Resource\font directory of my workstation.
Many thanks for your help.

Check all your fonts have headers that permit embedding - some commercial fonts don't. Debugging in Preflight is a nightmare, so to find the problem you may have to try the fonts one at a time against a test document until you find the one that whimpers.

Process chains get an error when run analysis process

When my PRD system‘s process chains run analysisi process, I gets below error message:
Error occurred when starting the parser: Error when opening an RFC connection (FUNCTION: 'R
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
Error when opening an RFC connection (FUNCTION: 'R
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
It's OK when i test the TCP-IP connection MDX_PARSER in Transaction SM59.
The Sys Log in Transaction SM21(error part):
M Wed Mar 19 09:22:50 2014
M *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35, r, ..) returned -14 [thxxexec.c
M {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A RFC 1878 CONVID 18933904
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A RFC> ABAP Programm: SAPLSTPA (Transaction: )
A RFC> User: JY-LKZ (Client: 900)
A RFC> Destination: CALLTP_AIX (handle: 8, DtConId: 530F4E5C30AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A RFC SERVER> RFC Server Session (handle: 1, 68443927, {5328109B-5F5D-12A0-E100-8000C0A8642F})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A RFC SERVER> Called function module: TMS_CI_START_SERVICE
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18933904 IDX=35
[abrfcio.c    9213]
A {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=5328109B5F5D12A0E1008000C0A8642F}_5
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Wed Mar 19 09:23:15 2014
M *** ERROR => ThPOpen: ExecPopen("/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61, r, ..) returned -14 [thxxexec.c
M {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A RFC 1878 CONVID 18968493
A   * CMRC=0 DATA=0 STATUS=0 SAPRC=0 RfcExecProgramKernel RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
A RFC> ABAP Programm: SAPLSTPA (Transaction: )
A RFC> User: TMSADM (Client: 000)
A RFC> Destination: CALLTP_AIX (handle: 3, DtConId: 530F4E7830AF4550E1008000C0A8642E, DtConCnt: 0, ConvId: ,)
A RFC SERVER> RFC Server Session (handle: 1, 70212851, {53281195-8F75-0F10-E100-8000C0A8642F})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
A RFC SERVER> Called function module: TMS_CI_START_SERVICE
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1887
FUNCTION: 'RfcExecProgramKernel'
RfcRaiseErrorMessage cmd could not be started by OS (rc = 1)
PROG ="/usr/sap/BWP/DVEBMGS00/exe/tp" bwprd sapgw00 18968493 IDX=61
[abrfcio.c    9213]
A {root-id=532810645F5D12A0E1008000C0A8642F}_{conn-id=532811958F750F10E1008000C0A8642F}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE.
ps.
1、IT's everything ok in the development system.
2、It’s ok when i repeat this analysis process .
3、It’s ok when i run this analysis process in analysis process designer.
4、Attachment is the sys log in sm21.
Thanks everyone.

Hi Vignesh.B,
Yes,it's not user's problem . But i don't think it APD's problem .Cause all APD has the same problem and .
Below is one of APD souce and target :
Hope this information is useful .
Regards,
Lian

I get an error when running adobe downloader

Similar Messages

Maybe you are looking for