I get an error when transfering contacts from Sanyo Katana to HTC One by bluetooth

The phones will connect and start the transfer. Then the HTC will get an error but
flashes so quickly that I cannot see what the error is. The screen then goes to
“Unexpected error….” and stops. Is this a problem with HTC or the old Katana?
Does anyone have a work around?

The message says that there is something wrong with the digital 'handshake'
that takes place when a website and Adobe try to communicate. This could
be caused by an error in the ebooks.com's authentication protocol, or with
Windows software that won't let the site connect to Adobe.
If you're using Windows 7, you'll have (to get help?) to check the security
settings as the first step in resolving the 'issues' that Win 7 has.
You'll end up having Windows 7 settings allowing communications with that
website.
Hope this helps!
=========

Similar Messages

Parameter Error when Transferring Files from ipod to laptop

Hi,
I have posted this topic previously but didnt respond fast enough and I think the system locked it down as I had too long of a delay.
I have recently set up iTunes on a laptop and want to start using this as my default iTunes for syncing etc. Unfortunately I no longer have access to the desktop that housed my original iTunes so I have followed the instructions to use my ipod as an external disc and transfer the files this way.
These are the instructions I have followed http://lifehacker.com/105256/how-to-copy-songs-from-your-ipod-to-your-pc
There are two issues I see. (1) the ipod control folder is allowing me to see what is housed in the folder but it is slightly greyed out compared to the other folders in the same location.
(2) when I try and copy the music folder to my desktop etc I get a parameter error.
So for example the error I have when transferring to my desktop I get
"Cannot copy OUTO (the file): The parameter is incorrect.
Hopefully someone has seen this before.
thx

No idea on your specific question but if it is of any help here are some articles and links about moving files from the ipod to the computer...
Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=1300144
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
http://discussions.apple.com/thread.jspa?threadID=809624&tstart=0
Also these somewhat dated but still useful internet articles...
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
Good luck!
Patrick

Getting 500 Error when calling XI from Siebel

Hi,
We have generated a WSDL file from XI and gave it to Siebel team. They are getting a 500 Error when they try to call us using that WSDL file. Below is the error message they are getting.
"[1] Error Invoking service 'MI_SIEBEL_WS_ORDER_TOXI_OUT', method 'MI_SIEBEL_WS_ORDER_TOXI_OUT' at step 'Call Web Service'. (SBL-BPR-00162).
[2] HTTP Request error during 'Submitting Data Send HTTP request': 'Status code -500'(SBL-EAI-04117)"
Thanks in advance for the help.
Thanks
Kumar

Hi,
Are you sure your Sender SOAP adapter is configured properly. Also ensure that the SIEBEL team is using the right URL to communicate to the SOAP adapter.
First try using SOAP Client and see if the scenario is working fine. If so then the problem lies in SIEBEL.
Check this link for confiuring SOAP sender
http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
Thanks,
Pakash

Transfering contacts from Sanyo to the BB 8530

how do i transfer my contact list from my Sanyo to the BB 8530 ? Both phones are on the boost network.

Transferring of contacts from any Blackberry to any Nokia is a very easy and fast process if youinstall Zebrost Phone Book Software i.e. Zpb.
After installing Zpb following procedure must be followed:
1.On Bluetooth in both the mobiles.
2.Mark the contacts you want to send with the help of Mark Contacts Option in Contact Options or
3.If you want to transfer all contacts Select Mark All Option in Contacts Option.
4.Then Select Send Option from Contact Options.
5.Select the mode ( here Bluetooth).
6.Select Send option.
For detail information about software features and the process of installation visit-
WWW.ZEBROST.COM

Getting ie error when calling event from code.

Hi all!
I've got an application (running on 6.40 sp8, ep6 sp2) that is pretty basic by all means. Since I want to implement some way to tell the user when he/she has made an error or just to inform him/her about something, I decided to use the ConfirmationDialog.
I've created an action called onActionShowErrorMessage in my view. This action is tied to my controller and an event defined in the controller.
Hence, when I want to show the ConfirmationDialog to show the user an error message, I call the controller method and in the method I fire the event that my view method is looking for.
So far so good..
When I call my controller method from a button action in the view everything works nicely, but when I try to call it from the wdInit method it fails?! I do get the ConfirmationDialog up but I also get an IE error window telling me that IE is trying to open a page it cannot find. I have no idea why it tries to open any page at all, since there is no navigation defined for this action.
Anyone got an idea? I couldn't find any good stuff in the system logs either
Best regards,
Andreas

Hello Sam!
Thanks for your answer! I would like to use something more of a pop thing, since i want to make sure the user sees it. The MessageManager does not work as good as it used to anymore, since it puts all messages in the bottom of the page. This page needs to be scrolled in order to see the error message..
Anyone got an idea of a workaround? I'm reading a propsfile, and in case I'm not able to read it I want to display this to the user.
B.R
Andreas

I get EDVR error when I communicate (from Labview )through Keithley's KPCI488 GPIB card to a HP34401A DMM?

I have installed the card correctly and used the trtest.exe program supplied alongwith the card to communicate with the DMM using *IDN?,READ?. Successful!! But I am unable to communicate from Labview 6i using labview<->gpib.vi. What to be done to get things right?

This question was recently asked so I know that Keithley is supposed to support LabVIEW and that you have to explicitly add the support when you install the Keithley driver. If you've done this, you might want to contact Keithley for additional help. You could also try using VISA instead of the older traditional GPIB functions. That's assuming you've installed the Keithley VISA driver. I've never used the Keithley GPIB card but I've used VISA and LabVIEW with cards from other vendors.

Getting an error when importing data from legacy to temptables

SQL*Loader: Release 10.1.0.2.0 - Production on Mon Feb 18 00:27:53 2008
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Control File: C:\Documents and Settings\rocky\Desktop\tempctrl2..CTL
Data File: C:\Documents and Settings\rocky\Desktop\EMP_DATA.txt
Bad File: C:\Documents and Settings\rocky\Desktop\EMP_DATA.bad
Discard File: C:\Documents and Settings\rocky\Desktop\EMP_DATA.dsc
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table "SCOTT"."TEMPTABLE2", loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
EMPNO FIRST * , CHARACTER
ENAME NEXT * , CHARACTER
JOB NEXT * , CHARACTER
MGR NEXT * , CHARACTER
HIREDATE NEXT * , CHARACTER
SAL NEXT * , CHARACTER
COMM NEXT * , CHARACTER
DEPTNO NEXT * , CHARACTER
Record 1: Rejected - Error on table "SCOTT"."TEMPTABLE2", column EMPNO.
ORA-01722: invalid number
Record 2: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 3: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 4: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 5: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 6: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 7: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 8: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 9: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 10: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 11: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 12: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 13: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 14: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Record 15: Rejected - Error on table "SCOTT"."TEMPTABLE2", column HIREDATE.
ORA-01843: not a valid month
Table "SCOTT"."TEMPTABLE2":
0 Rows successfully loaded.
15 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 132096 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 15
Total logical records rejected: 15
Total logical records discarded: 0
Run began on Mon Feb 18 00:27:53 2008
Run ended on Mon Feb 18 00:27:53 2008
Elapsed time was: 00:00:00.22
CPU time was: 00:00:00.01
can anyone help me with this please
Thankx & Regards
krish

Hi,
HireDate Column int he table SCOTT"."TEMPTABLE2 is date. The data you are trying to insert is not in the Default Date format. Hence it could be the reason.
Please provide TEMPTABLE2 Column Structure and the sample data for more details,
Regards
RK

Runtime error when Transfering data from data object to a file

Hi everybody,
I'm having a problem when I transfer data from data object to file. The codes like following :
data : full_path(128).
OPEN DATASET full_path FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
and transfer data from flat structure to this file full_path
move:    tab                 to c_output-tab_5,
              tab                 to c_output-tab_4,
              tab                 to c_output-tab_3.
transfer c_output to full_path.      // Error Line
The detail error like the following:
For the statement
   "TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "u". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
transfer c_output to full_path. " Line error
Please help me to fix this issue !
Thank you in advance !
Edited by: Hai Nguyen on Mar 4, 2009 10:55 AM

Hi Mickey,
Thanks for your answer,
I found out that the structure c_output have the field with data type X. I know that the cause of the issue.
      begin of c_output,
         vbeln(10),
         tab_5 like tab,
         posnr(6),
         tab_4 like tab,
         topmat(18),
         tab_3 like tab,
     end of c_output.
data : tab type X value 9.
Could you tell me how to fix it ? What I have to do in this situation ?
Thank you very much !

Why do I get "communication error" when selecting Contacts in Backup Assist Plus?

Have reset Backup Assistant Plus due to sync Errorcode 5 using Verizon response to others in this forum. After running Backup Assist Plus again, I find that I cannot select Contacts for backup. I get a message that says "Error - There was a communication error". I was able to select pictures and these were successfully backed up. Any suggestions?

Hello BobS3!
We absolutely want to make sure your contacts are backing up as well! I'm sorry you're running in to this concern. Let's figure this out together. Just to clarify, you mentioned you reset Backup Assistant Plus. Was this by following these steps: http://vz.to/14Iv5eS and clearing the data for the Sync Service and Backup Assistant apps?
Additionally, here is the easiest way to backup your contacts: http://vz.to/17zlkh3
Let me know the results!
Thanks!
MelissaM_VZW
Please follow us on Twitter @VZWSupport

XI Error when transfering invoice from MM - XI - SRM.

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=receiver</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = SRM</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = DEV01</Trace>
<Trace level="1" type="Timestamp">2007-11-05T15:02:42Z INDIA</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 472D3D926B8A3FE0E10000000AC83163</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBTR0002</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTR0002</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface InvoiceRequest_In*</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/SupplierEnablement/Global</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SRM</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = DEV01</Trace>
<Trace level="1" type="Timestamp">2007-11-05T15:02:42Z INDIA</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="Inbound Framework" />
- 
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<CX_ERROR href="#o91" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_SY_NO_HANDLER id="o91">
- <CX_ROOT>
<TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
<PREVIOUS href="#o90" />
<KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
- <INTERNAL_SOURCE_POS>
<PROGID>340</PROGID>
<CONTID>3133</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_NO_CHECK />
- <CX_SY_NO_HANDLER>
<CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>
</CX_SY_NO_HANDLER>
</cls:CX_SY_NO_HANDLER>
- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o90">
- <CX_ROOT>
<TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>340</PROGID>
<CONTID>3369</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_DYNAMIC_CHECK />
<CX_AI_APPLICATION_FAULT />
- <CX_BBPX1_STD_MESSAGE_FAULT>
<AUTOMATIC_RETRY />
<CONTROLLER />
<NO_RETRY />
- <STANDARD>
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: Function call failed; could not find the function BBP_PD_SUSIV_GETLIST Programm: SAPLBBP_BD_DRIVER_SAPXML1; Include: LBBP_BD_DRIVER_SAPXML1U20; Line: 63</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
</STANDARD>
</CX_BBPX1_STD_MESSAGE_FAULT>
</cls:CX_BBPX1_STD_MESSAGE_FAULT>
</asx:heap>
</asx:abap>
</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>

Hi,
We have configured the SAP for Plan Driven Procurement. We have SRM 5.5 version installed along with XI 7.0 and MM 4.7.
The scenario is to send the invoice from MM to SUS (SRM) via XI. We have created a ZNAST program to send the invoice from MM to SUS via XI. The invoice is moving from MM to XI and XI to SUS where it fails due to this error.
We have used OOTB scenarios and have not done any customizations as well.

Why am I getting an error when saving photos from mini ipad to macbook air?

I'm trying to download photos from my mini iPad to my MacBook Air and I got the attached message. Tried doing it several times and still got the same result. Is it because my start up hard disk is almost full? Please help. Thank you.

If your hard drive is full that could be a problem. Quit iPhoto restart the Mac and the iPad and try again.

Error while transferring materials from R/3 to APO

I am getting an error while transferring materials from R/3 to APO , the error is on the SCM side and its "NOEXEC" , the inbound queue has been blocked . what might be the problem

Hi Raj,
I think that you have RFC problems, you need to check this with your basis team, i give you a thread that talks about the same problem.
Regards.
Marí

When transfer content from current ipad to new one the apps didn't load

when transfering data from existing ipad to new one using icloud, the apps didn't download although the screen icons appear on the new ipad. how to fix?

So images of the apps appear on your screen and you cannot open them?
How did you transfer the data? Did you sync the content from itunes or restore the new ipad from the old ipad backup?
The best way would be to backup the old one and restore the new one from that backup
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766

When transferring photos from android to pc I get error code: c0000002. It keeps looping. Help.

When transferring photos from android phone to pc I get error code: c0000002. I am stuck in a loop. Please help.

thank you for answering. the problem is at least currently resolved.
On Tue, Sep 2, 2014 at 2:16 AM, Silkrooster <[email protected]>

Get 8004 error when using copy past command transferring pictures from one USB drive to another, why ?

Why do I get 8004 error, when I use copy past command to transfer pictures from one USB drive to another ?
There is no problem if the second drive is empty.

mumbles27 wrote:
one is MS-DOS
would that be in FAT32 or NTFS ?
mac OS extended (case sensitive)
i'm not 100 % sure but i have a fancy such a combination may not play well together.
nothing bigger than 2GB for one file
i was asking because FAT3 has a limitation in that it will not allow you to copy files larger than 4 GB.
JGG

I get an error when transfering contacts from Sanyo Katana to HTC One by bluetooth

Similar Messages

Maybe you are looking for