I get "command.exe entry point not found" NSSUTIL_DoModuleDBFunction dynamic link library softokn.dll :windows8.1 64bit, tried reset and fresh install but NG

I am using a 64bit fresh installation of windows 8.1 laptop with the latest 27.0.1 version of firefox. I have been getting start up error messages. The messages claimed that each of nss3.dll, mozglue.dll,plc4.dll,plds4.dll could not be found in windows. I found a good fix explanation on a site where I could download these missing files and copy them to the system folders on windows (in sytstem32 and sysWOW for 64 bit) Each time the error message popped up the next dll file missing and most recently the message has changed to “ command.exe entry point not found” NSSUTIL_DoModuleDBFunction dynamic link library softokn.dll As I can find no reference to this on the net I was hoping you might be able to shed some light on the problem.
I have tried reinstalling and I have also tried the reset option in troubleshooting but the problem remains after restoring my FF backup settings. A completely fresh installation does remove the problem but the first installation of a new extension add on (but seemingly not plug-in) and the problem returns regardless of which add-on.

I posted this question after the best part of 2 days trying to eliminate this, admittedly small but, irritating error. Some hours later I note the problem has gone away which I think is most likely down to a clean-up job done by the WiseCare 365 software.

Similar Messages

  • Getting AppleSyncNotifier.exe-Entry  Point not found       The procedure entry point xmlTextReaderName Could not be located in the dynamic link library libxml2.dll.

    getting AppleSyncNotifier.exe-Entry  Point not found       The procedure entry point xmlTextReaderName Could not be located in the dynamic link library libxml2.dll.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

    I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
    AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

    Since recently upgrading to the latest ITunes,on start up I get an error message:
    "AppleSyncNotifier.exe Entry point not found .
    Procedure entry point xml TextReader Constname could not be located in
    the dynamic link library libxml2.dll"
    Any body come across this? Any solutions? 

    Doublechecking, Dad:
    I have also reloaded all other iTunes software.
    Did you use the following document as a guide?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

  • When I start my computer I get a "AppleSyncNotifier.exe Entry Point Not Found message.  I also get an error message when trying to sync with iTunes that a backup session cannot be started.  How do I fix this?

    In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
    It says:  "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
    I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
    "iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
    The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process. 
    Any advice????

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    I think my problem is fixed now.
    For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
    A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
    I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
    So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

  • Having trouble downloading itunes on my computer. i keep getting a error message that reads: apple sync notifier.exe- entry point not found.

    Hello, can anyone help me out there? Im having trouble downloading itunes on my computer.
    Ikeep getting a error message reading:
    #1  applesyncnotifer.exe- entry point not found.
    #2  the procedure entry point sqlite3-wal-checkpoint could not be located in the dynamic link library. sqlite3.d11.
    #3  service 'apple mobile device' (apple mobile device)
          failed to start. Verify that you have sufficient privileges to start system services.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • HT1349 When my computer comes up, I always get this error message.  AppleSyncNotifier.exe entry point not found. SqLite3_wal_CheckPoint could not be located in the dynamic link library SQLite..dll.  What should I do?

    When I start up my PC I get the following message.  Apple Sync Notifier.exe entry point not found. Sqlite3_wal_checkpoint could not be locatedin the dynamic link library SQLite3.dll.  What do I need to do to correct this?

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • Why is it that every udate of my iPhone software do I get the error message on my laptop: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll

    Each time I update the software on my iPhone4 I get the following error message on my lap top: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll
    I go on line to find a solution, but it must be a common problem, why has apple not corrected yet?

    This is the fix I got from discussions and it worked for me.  It is copied below.  I just did the manual fix which I have underlined. Good luck! Regards, Belle.
    This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
    There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
    However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
    If it isn't, though, here's the manual fix:-
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well.
    I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
    I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

  • Since updating to 10.4 getting error message on startup 'AppleSyncNotifier.exe – Entry Point Not Found, The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'. How do I fix this annoying problem?

    Since updating to 10.4 I've been getting this error message on computer startup
    'AppleSyncNotifier.exe – Entry Point Not Found
    The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
    Please help me fix this annoying problem?
    belle

    This is the fix I got from discussions and it worked for me.  It is copied below.  I just did the manual fix which I have underlined. Good luck! Regards, Belle.
    This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
    There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
    However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
    If it isn't, though, here's the manual fix:-
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well.
    I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
    I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

  • When I turn on my PC, I get the message "Apple Sync Notifier.exe-entry point not found.  Then I cannot update my apps.  what to do?

    When I turn on my PC computer I get a small window pop-up that says "Apple Sync Notifier.exe-Entry Point Not found"  This message will not allow me to update my I-phone apps.  What can I do to remedy the problem??

    Try removing iTunes & all of its components, as described here, then reinstalling:
    http://support.apple.com/kb/HT1925

  • When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    Any answers how to fix it? All Im getting is error for the past 3 days!

  • When trying to use MobileMe I am getting an error message: AppleSyncPref.exe - Entry Point not found  Can you help?

    When trying to use MobileMe I am getting an error messgae: AppleSyncPref.exe - Entry Point not found  Can anyone assist?

    MobileMe no longer exists...that system was discontinued and merged into iCloud.
    Your old MobileMe email addresses shoule still be valid, or convert into some form of user@ me .com or icloud . com.

  • When I turn on my computer I get the message APPLESyncNotifer.exe   Entry Point not found.

    Have a 5th generation nano and when I connect to my computer I get a message APPLESyncNotifer.exe  Entry Point Not Found. Not a computer geek so I am stumped. Anyone out there who could help? I have reinstalled ITunes and restarted my computer to not avail.

    Copying & pasting SQLIte3.dll worked out well for your computer?
    Just read your trouble with your iPod nano 5th generation & Windows PC, how about trying the one I found on this community before?
    Click the start button and type in 'msconfig' in search, and, in system structure utitily, click on the tab of 'startup' and check off the box of 'AppleSyncnotifier.exe' and reboost your system.(You have to follow down till the end of the place of the file.) That'll solve your trouble.
    I don't know you connect iPad or iPhone at all, that may change the solution? Hoping this suggestion also work out for you & your PC.

  • When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."

    When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."

    Are you really using Windows ME?<br />
    Your More system details list shows an IE8 user agent
    You need to do a clean reinstall and remove the Firefox program folder before installing a newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Maybe you are looking for