I get different result when I paste with mouse and shift+ins

Sometimes I get different result when I paste the clipboard content with mouse and shift+insert key combination. Why? What can I do to stop this annoyance?

Just to add a little to the above, there really is no universally applied standard (not even close) for how the primary, secondary, and clipboard buffers should be used. Any X program can use them however they wish. But there are some common patterns: selected text should be placed in the primary buffer, and X pastes from the primary buffer with either middle click or shift-ins by default.
This default can (and unfortunately often is) overriden by clipboard managers - I don't know why they don't stay true to their name and just manage the clipboard buffer, but they often don't.
<mini rant>with no clipboard tools installed, selected text in any program I have is in the primary selection, and shift+ins or middle click paste from this primary selection. Ctrl-C/Ctrl-V post to/from the clipboard buffer. No need for extra tools. If I install any clipboard manager, this default sanity of X11 goes strait to s(&*Y. I don't like clipboard managers </mini rant> <mini praise> X11 is great without any of that cruft added </mini praise>
Last edited by Trilby (2013-06-15 03:12:39)

Similar Messages

Why Do I get different result when Run as Admin to Standard?

Why when Running this script to copy from the "config64" folder (if files exist)(if not copy from "config32") if works correctly when running Batch file normally (copies the config64), but using the exact same line when running
the Batch file as "Run as Administrator" it doesn't work correctly (copies the config32, even though Files do exist config64 folder as they did when I ran it normally and it worked)
>nul 2>nul dir /a-d "Folder\config64\*" /s && (XCOPY "%~dp0Folder\config64\File64.ini" "%ProgramFiles(x86)%\CompanyFolder\ProductFolder\" /y /d) || (XCOPY "%~dp0Folder\config32\File32.ini" "%ProgramFiles(x86)%\CompanyFolder\ProductFolder\" /y /d)
UAC is turned off and I'm the administrator (only user on a standalone PC) running windows 8.1.
Is there a reason or it is a strange bug with Windows 8.1?

A LOT more intellectual than
Frederik Long Who just had no clue himself to not offer an answer. As I've only been looking at this for 2 weeks I think I've come far and you help is much appreciated. Thank you JRV!
You seem to miss the point. Assuming that your problem is caused by a bug can prevent you from finding the real cause. If you had dismissed the bug theory then you might have done some real debugging, e.g. by breaking up your single-line script (which is
hard to comprehend) into easily digestible pieces and adding some debugging code like so:
@echo off
set Target="%ProgramFiles(x86)%\ComapanyFolder\ProductFolder\"
dir /a-d "Folder\config64\*" /s 1>c:\Test.log 2>&1
if %ErrorLevel% EQU 0 (
XCOPY "%~dp0Folder\config64\File64.ini" %Target% /y /d /s 1>>c:\Test.log 2>>&1
) else (
XCOPY "%~dp0Folder\config32\File32.ini" %Target% /y /d /s 1>>c:\Test.log 2>>&1
The log file would have told you quickly what is going on. Furthermore - why should I offer my own solution to your problem when JRV gave you a perfect answer straight away?

Xterm copy / paste with mouse, and kbd shortcuts

Any idea what options I need enabled/disabled in Xdefaults to let me copy and paste to/from an xterm using the mouse? Also, the same question for using keyboard shortcuts (like Ctrl-a to move to start of line)?

xterm*faceName: Bitstream Vera Sans mono
xterm*faceSize: 10
xterm*eightBitInput: false
xterm*boldMode: off
xterm.scrollBar: false
xterm*saveLines: 1000
xterm*Foreground: white
xterm*Background: #303430
xterm*Border: #303430
xterm*TitleBar: on
xterm*TextUnderIcon: on
xterm*AllowIconInput: on
xterm*AutoRaise: on
xterm*termtype: vt100
xterm*ttyModes: intr ^c erase ^h susp ^@ dsusp ^@ kill ^u eof ^d
xterm*jumpScroll: true
xterm*multiScroll: true
xTerm*cutNewline: False
xterm*scrollTtyOutput: false
xterm*scrollkey: true
! Xterm Colors
!black
xterm*color0: #303430
xterm*color8: #CDB5CD
!red
!aterm*color1: #dca3a3
xterm*color1: #bf7979
xterm*color9: #f4a45f
!green
xterm*color2: #97b26b
!aterm*color2: #afc5af
xterm*color10: #c5f779
!yellow
xterm*color3: #cdcdc1
xterm*color11: #ffffef
!blue
xterm*color4: #86a2be
xterm*color12: #98afd9
!magenta
xterm*color5: #d9b798
xterm*color13: #d7d998
!cyan
xterm*color6: #a1b5cd
xterm*color14: #a1b5cd
!white
xterm*color7: #ffffff
xterm*color15: #dedede
Xft.dpi: 96
! Urxvt Colors
!black
urxvt*color0: #505450
urxvt*color8: #505450
!red
!aterm*color1: #dca3a3
urxvt*color1: #bf7979
urxvt*color9: #f4a45f
!green
urxvt*color2: #97b26b
!aterm*color2: #afc5af
urxvt*color10: #c5f779
!yellow
urxvt*color3: #cdcda1
urxvt*color11: #ffffaf
!blue
urxvt*color4: #86a2be
urxvt*color12: #98afd9
!magenta
urxvt*color5: #d9b798
urxvt*color13: #d7d998
!cyan
urxvt*color6: #a1b5cd
urxvt*color14: #a1b5cd
!white
urxvt*color7: #ffffff
urxvt*color15: #dedede
! Urxvt Settings
urxvt*scrollTtyOutput: false
urxvt*scrollTtyKeypress:false
urxvt*loginShell: true
urxvt*font: xft:Bitstream Vera Sans mono:size=10
urxvt*scrollBar: false
urxvt*foreground: white
urxvt*background: #303430
urxvt*geometry: 80x25
urxvt*saveLines: 10000
urxvt*inheritPixmap: false
urxvt*fading: 40
Aterm*transparent: true

Getting different result while running Dashboard SP Using Temporary table?

Hi Experts
I am getting different result when I run my dashboard procedure I am using temporary table with "ON COMMIT PRESERVE ROWS", below is the information
I am running my attendance dashboard procedure which will display the employee attendance status based IN and OUT punches the status like AA-full day absent, GG-Full day Present, AG-First half absent,GA-Second half absent. Now when I run the first time my procedure for first time I am getting status AA even though IN and OUT timings are correct and if run it again then it is displaying the status for same employee as GG
I didn't understand the problem where it is effecting the status

ChakravarthyDBA wrote:
It is procedure which will display the employee status, back end I am storing the procedure result in Temporary table with "ON COMMIT PRESERVE ROWS", when I run the procedure first time it is showing wrong information when I run it again second time then it is showing correct information. I don't know why the status is changing.
first time employee status is AA --Full day absent and Second time is GG--Full day present (in both cases IN and OUT timings are correct only)
is it effecting due to temporary table?
So, you have a GTT and you're doing "something" with it and that "something" isn't what you expect.
I've about summed up what you've posted and given us to work with. If you have specific examples please do share. Without them we're going to be of very little use to you.
If you aren't getting the results you expect, it stands to reason that
1) you don't understand the outputs you are supposed to be getting
2) you have a bug in the code developed
Please stop and think about this, pretend you are the one trying to help out. You've been given little to no information about a system you've never seen before. You need to explain your situation as you would if you brought someone in to your shop to show them this problem you are having ... the rules don't change just because it's not face-face interaction.
Cheers,

SQL Query produces different results when inserting into a table

I have an SQL query which produces different results when run as a simple query to when it is run as an INSERT INTO table SELECT ...
The query is:
SELECT   mhldr.account_number
,        NVL(MAX(DECODE(ap.party_sysid, mhldr.party_sysid,ap.empcat_code,NULL)),'UNKNWN') main_borrower_status
,        COUNT(1) num_apps
FROM     app_parties ap
SELECT   accsta.account_number
,        actply.party_sysid
,        RANK() OVER (PARTITION BY actply.table_sysid, actply.loanac_latype_code ORDER BY start_date, SYSID) ranking
FROM     activity_players actply
,        account_status accsta
WHERE    1 = 1
AND      actply.table_id (+) = 'ACCGRP'
AND      actply.acttyp_code (+) = 'MHLDRM'
AND      NVL(actply.loanac_latype_code (+),TO_NUMBER(SUBSTR(accsta.account_number,9,2))) = TO_NUMBER(SUBSTR(accsta.account_number,9,2))
AND      actply.table_sysid (+) = TO_NUMBER(SUBSTR(accsta.account_number,1,8))
) mhldr
WHERE    1 = 1
AND      ap.lenapp_account_number (+) = TO_NUMBER(SUBSTR(mhldr.account_number,1,8))
GROUP BY mhldr.account_number;      The INSERT INTO code:
TRUNCATE TABLE applicant_summary;
INSERT /*+ APPEND */
INTO     applicant_summary
( account_number
, main_borrower_status
, num_apps
SELECT   mhldr.account_number
,        NVL(MAX(DECODE(ap.party_sysid, mhldr.party_sysid,ap.empcat_code,NULL)),'UNKNWN') main_borrower_status
,        COUNT(1) num_apps
FROM     app_parties ap
SELECT   accsta.account_number
,        actply.party_sysid
,        RANK() OVER (PARTITION BY actply.table_sysid, actply.loanac_latype_code ORDER BY start_date, SYSID) ranking
FROM     activity_players actply
,        account_status accsta
WHERE    1 = 1
AND      actply.table_id (+) = 'ACCGRP'
AND      actply.acttyp_code (+) = 'MHLDRM'
AND      NVL(actply.loanac_latype_code (+),TO_NUMBER(SUBSTR(accsta.account_number,9,2))) = TO_NUMBER(SUBSTR(accsta.account_number,9,2))
AND      actply.table_sysid (+) = TO_NUMBER(SUBSTR(accsta.account_number,1,8))
) mhldr
WHERE    1 = 1
AND      ap.lenapp_account_number (+) = TO_NUMBER(SUBSTR(mhldr.account_number,1,8))
GROUP BY mhldr.account_number;      When run as a query, this code consistently returns 2 for the num_apps field (for a certain group of accounts), but when run as an INSERT INTO command, the num_apps field is logged as 1. I have secured the tables used within the query to ensure that nothing is changing the data in the underlying tables.
If I run the query as a cursor for loop with an insert into the applicant_summary table within the loop, I get the same results in the table as I get when I run as a stand alone query.
I would appreciate any suggestions for what could be causing this odd behaviour.
Cheers,
Steve
Oracle database details:
Oracle Database 10g Release 10.2.0.2.0 - Production
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
Edited by: stevensutcliffe on Oct 10, 2008 5:26 AM
Edited by: stevensutcliffe on Oct 10, 2008 5:27 AM

stevensutcliffe wrote:
Yes, using COUNT(*) gives the same result as COUNT(1).
I have found another example of this kind of behaviour:
Running the following INSERT statements produce different values for the total_amount_invested and num_records fields. It appears that adding the additional aggregation (MAX(amount_invested)) is causing problems with the other aggregated values.
Again, I have ensured that the source data and destination tables are not being accessed / changed by any other processes or users. Is this potentially a bug in Oracle?Just as a side note, these are not INSERT statements but CTAS statements.
The only non-bug explanation for this behaviour would be a potential query rewrite happening only under particular circumstances (but not always) in the lower integrity modes "trusted" or "stale_tolerated". So if you're not aware of any corresponding materialized views, your QUERY_REWRITE_INTEGRITY parameter is set to the default of "enforced" and your explain plan doesn't show any "MAT_VIEW REWRITE ACCESS" lines, I would consider this as a bug.
Since you're running on 10.2.0.2 it's not unlikely that you hit one of the various "wrong result" bugs that exist(ed) in Oracle. I'm aware of a particular one I've hit in 10.2.0.2 when performing a parallel NESTED LOOP ANTI operation which returned wrong results, but only in parallel execution. Serial execution was showing the correct results.
If you're performing parallel ddl/dml/query operations, try to do the same in serial execution to check if it is related to the parallel feature.
You could also test if omitting the "APPEND" hint changes anything but still these are just workarounds for a buggy behaviour.
I suggest to consider installing the latest patch set 10.2.0.4 but this requires thorough testing because there were (more or less) subtle changes/bugs introduced with [10.2.0.3|http://oracle-randolf.blogspot.com/2008/02/nasty-bug-introduced-with-patch-set.html] and [10.2.0.4|http://oracle-randolf.blogspot.com/2008/04/overview-of-new-and-changed-features-in.html].
You could also open a SR with Oracle and clarify if there is already a one-off patch available for your 10.2.0.2 platform release. If not it's quite unlikely that you are going to get a backport for 10.2.0.2.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

Regular Expression: Different results when using FIND or regex classes

Hi,
has anybody an idea why the FIND REGEX statement and the regex class delivers different results when searching for
^\*
in
I try to find every place with an asterisk as first sign of the line.
The FIND statement
DATA gv_string        TYPE        string.
DATA gv_pattern       TYPE        string.
DATA gt_match_result TYPE        match_result_tab.
gv_string = '****'.
gv_pattern = '^\*'.
FIND ALL OCCURRENCES OF REGEX gv_pattern
                           IN gv_string
                      RESULTS gt_match_result.
returns one hit as expected. But the class cl_abap_regex and cl_abap_matcher returns four hits in this example:
DATA gv_string        TYPE        string.
DATA gv_pattern       TYPE        string.
DATA gt_match_result2 TYPE        match_result_tab.
DATA gx_regex         TYPE REF TO cl_abap_regex.
DATA gx_matcher       TYPE REF TO cl_abap_matcher.
gv_string = '****'.
gv_pattern = '^\*'.
TRY.
    CREATE OBJECT gx_regex
      EXPORTING
        pattern = gv_pattern.
CATCH cx_sy_regex .
    BREAK-POINT.
    EXIT.
ENDTRY.
TRY.
    CREATE OBJECT gx_matcher
      EXPORTING
        regex = gx_regex
        text = gv_string.
CATCH cx_sy_matcher .
    BREAK-POINT.
    EXIT.
ENDTRY.
gt_match_result2 = gx_matcher->find_all( ).
BREAK-POINT.
Looks like the class doesn't consider the start of line symbol (^). Is there an error in my implementation?
Any help is appreciated.
Matthias

Hi Jim,
thank you for your reply. But to negate a value set of single characters you have to use
[^ ]
I used just the character
^
This is defined as anchor character for the start of a line (See the documentation link you posted -> chapter 'Special characters for search strings') .
As I understand it, should the FIND REGEX statement does the same as the CL_ABAP_REGEX and CL_ABAP_MATCHER classes. Therefore, I do not understand, why both implementations deliver another result.
And I didn't find an answer for that. Does anyone else?
Matthias

RH_STRUC_GET get different result

All experts,
    As i use this FM to get OM structure, the evalation path it 'MSSDIREC'. it can ge resutl, but , i use two logon ID to check this, it gets different result, how to do this?

My parameters is like this:
CALL FUNCTION 'RH_STRUC_GET'
            EXPORTING
                ACT_OTYPE = 'O'
                ACT_OBJID = it_org-sobid               "50006642
                ACT_WEGID = 'MSSDIREC'              "evalation path
                ACT_PLVAR = '01'
                ACT_BEGDA = lv_date1 "wa_begda M1        "21.10.2009
                ACT_ENDDA = lv_date1 "wa_endda              "21.10.2009
            TABLES
                RESULT_TAB = lt_d_result_tab
            EXCEPTIONS
                NO_PLVAR_FOUND = 1
                NO_ENTRY_FOUND = 2.
I use two Logon ID to test this FM, but it get two different result.
i want to know why there is different result in different ID,
Edited by: Kevin Leung on Oct 21, 2009 9:40 AM

Is it possible in iTunes 11 to get the old album list view, with covers and track listings like in 10?

Is it possible in iTunes 11 to get the old album list view, with covers and track listings like in 10?
If not, then to me that is a huge retrograde step

No, the old album list view is not an option in iTunes 11...
You can restore much of the look & feel of the previous version with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
If you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and supporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP

Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.

I get double entries when I back up calendar and contacts. Why?

I get double entries when I back up calendar and contacts. Why?

may you using different apple ID's on your different systems ? In that case, you might have more than one icloud ID and syncing/mounting any calendars in one view, so you have the same entry doubled

I get this message when i try to sync and download my iphone: itunes was unable to load data class information from sync services, reconnect or try again later. what does that mean and who do you fix it

I get this message when i try to sync and download my iphone, ITUNES was unable to load data class information from sync services, reconnect or try again later. this has happened twice. i have not downloaded by phone in several months. the first time i got this message i did not understand i and left my phone plug in for 12 hrs and it never did anything. today. when i got the message i just unplugged it.
help

http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

I get no response when trying to erase history and/or cookies in Safari since last update.

I get no response when trying to erase history and/or cookies in Safari since last update. The command line words are light gray and will not respond to touch. Thank you.

Try going to settings>general> restrictions and remove all restrictions first.

I get different result when I paste with mouse and shift+ins

Similar Messages

Maybe you are looking for