I get double notifications

I use Iphone 4 and ios 5.01 and get double notificaitons from my calendar from entries I make.   I use Google imap to sync my device and I have turned off icloud so I think that it is not providing a duplicate.  When I edit the double notifications, one indicates the source as my default calendar and the other I cannot edit ie., it does not indicate which calendar is providing the same information, not a big deal but bothersome!   As an aside, how do I get subscribed calendars to show up on my iphone notifications?
Thanks
GH

I think I found the solution; in my google calendar, I found a calendar that I was subscribe to which I have eliminated.  Now I want to figure how to the subscribed calendars on my google calendar and ical to show up on my iphone.
GH

Similar Messages

  • Keep on getting double notification  from my default mail app, and gmail app, how do i make google my primary one?

    keep on getting double notification  from my default mail app, and gmail app, how do i make google my primary one? so that i dont have to get doulbe notifications  on both apps

    This is probably not the answer to all your questions, but I am sure it answers some.
    Unlike Word and InDesign, FrameMaker's anchored frames, which hold graphics, "hang" from their insertion points, typically at the end of the paragraph. An anchored frame that follows a paragraph is set to be below the line, the line being the last line in the paragraph. If you turn on View > Text Symbols, you will see a marker that indicates the point from which the anchored frame is hanging.
    If the anchored frame is taller than the available space, it is moved to the next page ALONG with that last line. If the paragraph style/tag has a widow/orphan lines number that is more than 1, then that number of lines are also moved to the next page, because the paragraph tag says to keep that many together, EVEN if there is space at the bottom of the previous page.
    So, you can set the widow/orphan lines number smaller OR as you have done put a blank line before the anchored frame, which now holds the marker for the anchored frame, and set its font size to 2 pt (the lowest FrameMaker allows) and its line height to zero. This is the standard workaround UNLESS you use the line above the anchored frame as the title/caption of a figure, which is also a typical way of dealing with FrameMaker's ways.
    To my knowledge, one cannot change the default of the checked cropped box. Maybe others know of some way to change this.
    There is no page break in FrameMaker, hence there is no symbol for it. In the paragraph designer for the paragraph, you set to Start of the paragraph to Top of page. Top of page is FrameMaker's equivalent to a page break. To "remove" a page break, set the Start of the paragraph to Anywhere.
    Since you are new to FrameMaker, I suggest reading throught the User Manual that comes with FrameMaker. You will likely find the answers to most of your questions there.
    Hope this helps,
    Van

  • Getting double notifications for Outlook 2013 on Windows 8.1 pro

    Hi,
    I have Outlook 2013 installed on windows 8.1 pro 64bit. I am having an issue with outlook notifications, I am getting 2 notifications for each mail that I receive.
    I tried searching for the issue and found that I have desktop alerts enabled in Outlook settings and also windows 8 notifications for outlook in PC settings. Both these options generate their own notifications, so I get 2 notifications for each mail.
    When I turned off outlook notifications in PC settings, both the notifications stopped. Then I disabled desktop alerts from outlook settings and started getting only one notification.
    The issue is that both these notification look a bit different, outlook desktop alerts also show sender's photo which I prefer and I also have some outlook rules configured to show desktop alerts for only certain mails. So I want the desktop alerts to continue
    and stop standard windows 8 notifications for outlook.
    Does anyone know how to do that?
    Thanks in advance.
    SP

    Hi,
    As far as I know, Outlook email notifications are only shown in Window 8.1 if notifications are enabled in both Outlook and Windows.
    I suspect the rules are causing this double notification issue.
    You may export all the rules for backup, then start Outlook with the switch "/cleanrules":
    Win key + R, type "outlook.exe /cleanrules" in the blank box, press Enter.
    Check if the issue persists.
    If the issue is gone after running Outlook with "/cleanrules", then let's import these rules back to check the result.
    If the issue is back again, please check if any rules trigger the notification twice, use "stop processing more rules" as you need to stop the emails triggering more than one rule.
    Regards,
    Melon Chen
    TechNet Community Support

  • Double notifications for SMS

    Lately, I keep getting TWO notifications of text messages. It doesn't matter who it came from, about 10 min later, the identical message will "bing" at me. *It's not delivered twice, but the phone notifies me of it twice.* It's really annoying and I don't know if this is a phone thing or service thing. Since it's not delivered twice, I'm assuming it's a phone issue. Any ideas? Thanks.

    daisyintampa wrote:
    If you unlock the phone and dismiss the notification or read/reply. Then it shouldn't bug you again.
    Well, as two of us have just stated, even when we REPLY we are getting double notifications. Obviously, we have to unlock the phone and go into SMS when we reply. So what do I have to do? Go into the Apple store?
    Sorry, but you never said you replyied to it. You said
    But even if I DO pick up the message (which I nearly always do because it's on me)
    But you responded to my post where I said some people don't feel it. To me your choice of words came across that you "picked up" as in felt/became aware, etc of the notification. You never said you did anything with the phone.
    But with that said, I would say try the traditional stuff first.
    Reboot the phone (both buttons for about 10 seconds ignoring slide to turn off until you see Apple Logo then let go).
    Test out sending yourself an SMS (if need to, send from computer to [email protected]
    If still an issue, do a restore (yes it is a pain but Apple will tell you same thing and even do it in the store before handing over a replacement).
    If restore doesn't work, then call 1-800-MY-IPHONE and make an Appt at store.

  • I get double the amount od gmail notifications in notification -- both from new mail and all mail.  What can I do?

    I get double the amount of gmail notifications on my iPhone 4 or iPad 2 using iOS 5.  Any ideas how to fix?

    I Think that you have system sounds muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    My camera button is not showing up in my Locked Screen on my iPhone 4 but will show up when I get a notification.

    Double Click home button, then tap the camera icon next to the slide to unlock.

  • Double notifications of emails in iOS6 and calendar hiding

    I have gmail (exchange) setup on the iOS6. I also tried getting notifications (notification center an/or lock screen). Unfortunately, the system isn't only passing notifications of new messages from INBOX but also from "ALL MAIL"....which means double notifications
    Furthermore, notification center doesn't respect the "hide calendar", so it is also passing calendar events into notification center for calendars that are HIDDEN in the Calendar app.  I'd have thought this would have been fixed from iOS5 to iOS6.  But no?

    Ok. Found the solution to problem #1:  In each account, you can select "folders to push" in exchange...I had "all mail" set to push...it doesn't actually push anyway, and it also causes it to be reported in Notification Center.
    Problem two, however, still remains. Thanks.

  • Since the last update of my iphone4 I don't get anymore notifications on messages (sms)

    Since the last update of my iphone4 I don't get anymore notifications on messages (sms);Can you help me please ??

    Hello Omar31,
    It sounds like you are not getting notified when recieving a text message on your phone. I recommend starting by verifying that Messages is set up for notifications with:
    Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
    From: iOS: Understanding notifications
              http://support.apple.com/kb/ht3576
    If Messages is configured properly, try closing all the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that and restart the phone and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Double Notifications in iOS 5 (Facebook app)

    I'm slightly annoyed at this moment....
    After installing iOS 5 a few days ago,meverything seemed to be working as advertised.  However a problem child reared it's ugly little head.  NOTIFICATIONS!!!  Suffice it said that subject line says it all. 
    Whenever I get an email, or a fb msg, or some other notification, it comes in twice...one right after the other.  I never had this issue with my 4 previous iPhones or even this iPad2, until iOS 5!!!  IOS 5 loads up and BAM!!! Double notifications for everything!!! 
    So that we're clear about the step I've taken resolve this issue:
    1.) uninstalled iOS 5, twice...clean install, twice...same issue.  Not a back up, and restore...nope, a clean reset.
    2.) tuned off all notifications for all apps, turned back on just fb and mail...same results.
    3.) iPad2 on/off multiple times, no change before or after.
    Anyone????

    gosh I wish it were THAT simple.  But alas its not.
    Because if it were that simple...I'd have marked your solution, which I arrived at days ago, as right on the money! In fact, I wouldn't have posted here at all dude. 
    Let's try this one more time, shall we ?
    facebook, mail, and every other app that has been removed from notification center, STILL reports every entry TWICE....
    So let's say that a friend leaves a message on my wall on facebook, the ipad receives that notification and then displays it TWICE as an alert badge, and a sound!
    Anyone ?
    Miles.

  • Must I open FB, skype, and other IM apps to get push notification in iphone 4s?

    Must I open FB, skype, and other IM apps to get push notification in iphone 4s? Because I notice that once i close the apps, it will not send me message. I thought that is what "PUSH" means??

    ok, i saw a line saying "If the app requires entering or logging in to an account, you will need to do this before receiving notifications."
    so, that means i must "open" the app in background in order to get push notification??
    what i mean by PUSH notification is by double clicking your home button, then press on the apps and CLOSE the app and yet you can get message from your friends. I think iphone cannot do that currently?

  • Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

    Install this to get X11 functionality back in 10.8
    http://xquartz.macosforge.org/landing/
    Worked great for me and others.
    Jerry

  • Getting Double values in Purchasing cube

    hi experts,
    I m getting double values for 0po_items and ocontr_item in purchasing data cube 0pur_c01.
    i have also applied the test rule in routine ,that values are fine.
    but in cube values are getting double.
    please help..........

    Hi,
    It seems like you are loading data into cube using 2 DataSource  and there is no (consolidated) dso in between.
    If the KF say (qty) you are mapping from both the datasource to the cube, it is going to be doubled in report as 2 records will be found in cube.
    I suggest try to load a single valid record (PO and lien item) one by one into the cube and do check the values in cube for each process. You will get good idea how cube behave while loading data from diff. sources.
    Also try to bring in the one dso where you consolidate the data as per report requirement and then move that data into Cube, will give you required output.
    Thank-You.
    Vinod

  • LTA is getting Double when EE changes Department /Designation in mid of the

    Hi Sapiants,
    LTA amount is getting Double when EE changes Department /Designation in mid of the month. what is the reason behind this problem.
    Regards
    vinmax

    Dear Delik,
    Now double appearance of LTA amount is gone by assigning the spec . to Pr.Cl. - 06 .Your answer helped buddy in this egard. but a new problem is coming. system is populaating some amount with a wagetype. though it is not part of IT 0008.
    Thanx
    Vinmax
    Edited by: kvin kvin on Jul 25, 2008 12:28 PM
    Edited by: kvin kvin on Jul 25, 2008 12:29 PM

  • Wage types in Payroll Process getting doubled.

    Hi,
    experts i have an issue while running Payroll.
    An employee is having a change in shift schedules in mid of the month and while running the payroll the salary is getting doubled with same wage types twice as attached.
    Here the payable month days are fixed for a group of employees i.e.26 days a month. This days are given in IT 15 as no of days and this no is converted to RTE in payroll.
    in  (Indian Payroll Schema) INBD sub schema Function WPBP is creating Splits as per the master data change in IT 7 and in payroll iam getting salary doubled can anything be done to eliminate / delete the splits 01 or 02 as per the requirement to calc salary only on the required split.

    I think you must have written a rule to calculate the amount for 26 days use operation ELIMI * in the rule then check it once eliminated again you wanted the amount with splits you can use operation WPALL.
    Use operation ELIMI * as first line of rule.
    Regards
    Venkatesh

  • I cannot access my ipnoe due to i get a notification saying Not Enouhh Storage and i cannot get out of it or go to settings please help what can i do to fix this problem?

    I cannot acces my IPhone due to i get a notification saying that i dont have enough storage and i need to back it up with ICloud but it wont let me click close or settings there for i cannot recieve calls or acces my email or text messages. I even tried turning off the power but it wont let me do anything please help !

    If the iPhone won't Restart you should be able to Reset it. Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    For the future (in case you don't' know), go to Settings > iCloud > Storage & Backup > Manage Storage, and choose your Device under the Backups list.
    Under the Backup Options turn off anything you don't care about (being backed up, that is). This will let you reduce the backup size so that it fits in iCloud again. You can also delete the current backup here.
    You should also check Settings > General > Usage and look at how much data each app is storing. Identify problem apps and go clean out unwanted files.
    Great resource as well http://support.apple.com/kb/HT5262
    Hope this helps!

Maybe you are looking for

  • Need Help With NetBeans (Java Studio Enterprise 8)'s code generation

    Hi! I am using Java Studio Enterprise 8 with NetBeans 4.1 IDE bundled together with it. When trying to create GUI out from NetBeans Form Designer, I don't like the way it generates the code. When I try to use a JTextField, it uses "Fully Qualifed Cla

  • How to open multiple Sessions in Solution Manager

    Good Day Gurus, I am currently working on Solman 7.1 Sp12.My question is :Is it possible to open multiple sessions in Solution Manager? Here is the scenario: The client is working on multiple incidents and instead of logging on to the system again to

  • Steps to stop a program

    A program wiht name rsbatch_execute_prozess is running  each 10 mins Pls tell me teh procedure to stop this

  • Creative Muvo N

    For some reason I am having trouble with windows XP recognizing the player. It sayes that their are no drivers installed for this device. Any help is appreiciated. I've downloaded the new explorer and updated drivers. Thanks Scott

  • JNDI Datasource for MS SQL Config

    I'm at a lose as to how to configure and use the tomcat connection pool. Can anyone give me some pointers and help with this. I have read the forums and the help doc that comes with Tomcat but it didnt really help at all. What am i suppose to put int