I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC.mit with my Mac i get that error.

Hi, I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC. with my Mac i get that error.
It is true the Ithunes I get the problem.
What can I do to fix this.
I also have problem some times to conect to my Ipad to Apple tv. Some time I have to restart my Ipad to get conection to Apple t. whay is that ?
can some one help me ?

Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

  • I'm getting an "error 404" when I try to connect to a webinar - does anyone know what this means?

    I'm getting an "error 404" when I try and connect to a webinar - does anyone know what this means?

    Basically, it means that either the link you have is bad or the Connect server you are trying to connect to is down or inaccessible.
    HTTP 404 - Wikipedia, the free encyclopedia

  • HT201413 I get error 20 when I try to download updates to installed Apple software  I have two users on the IMac. I resolve the problem by clearing all cookies on both users Safari. Why do I need to do this? What is going on?

    I get Error 20 when I try to download updates for installed Apple apps on my IMac.  I have two users on the IMac, and I resolve the problem by clearing all cookies on both users Safari, opening and closing the App Store for each user, shutting down and restarting the IMac for each user, until finally the download works. There must be an easier way.  I also have an Air, where I have no problems whatsoever. Both machines have Doorstop and MacKeeper with the same settings, so I have ruled those programs out as the cause. I believe iot is because I have two users - any ideas?

    Please read this whole message and be sure you understand all of it before doing anything. Back up all data before making changes to your settings.
    Write down the server addresses.
    Click Cancel to close the Advanced sheet. Unlock the preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Open the DNS tab again and change the server addresses to the following:
    8.8.8.8
    8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself.
    2. I’m not advocating Google or anything else as a DNS provider; the server addresses are offerred merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • Cannot connect airport express to ipad I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    cannot connect airport express to ipad
    I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express.  Does anyone have a solution?

    I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
    Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
    I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
    BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
    I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
    So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
    Since I have had this Airport Express I have spent many hours trying to get it to work.
    It works just long enough to fool me and then takes a dump...
    Maybe this time?
    5 Minute later...
    Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
    [An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
    Wonderful Green LED though. Totally useless piece of equipment AFAIK.
    Message was edited by: Daniel Shattuck

  • When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home.

    When I try to connect to the wi-fi net work at my work place on my new iPad 3  I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
    turn wi-fi off and on again
    did a hard restart of my iPad
    reset network connections back to factory settings
    verified wi-fi is working as my computer accesses internet without issue.
    verified that my software is up to date.
    Does anyone have more suggestions?

    Couple of suggestions.
    First, many companies have a gateway on their networks that block non approved devices.  I work in such a place.  You might check with an IT guy , and see if they have a block in place.
    Second, the message you are getting means that you have not negotiated the security settings.  So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
    Again, if you can find one, talk to an IT guy and see if he has some suggestions.

  • After updating to iTunes 11.1, i'm getting error 42404. Everything's working fine though, other than my iPod classic which is now getting automatically ejected when I try to connect it.

    I'm on Windows 8 64bit, and I have a 160gb iPod classic which has worked perfectly on all versions of iTunes including 11. Just a couple of days ago I updated to 11.1, and now when I open iTunes it gives me that error message. Re-installing or repairing iTunes has absolutely no effect, I've done that about 10 times now.
    Everything in the program actually works fine, but when I try to connect my iPod, it says "connected, do not disconnect" for about 10 seconds before flashing up the "sync in progress" screen for about half a second, and then it goes to "okay to disconnect".
    I have connected the iPod in disk mode and exactly the same thing happens.
    Any ideas? Is my iPod now a brick until apple does another update?

    Upgrading to itunes 7.0 just cost me 2 days of messing around and in the end I had to revert back to v6.0 and resore my lib.
    Apple CS was good but did not belly up the fact that 7.0 is defective in some cases and in the end told me I had a hardware problem!
    The main issue is that I could not get itunes 7.0 to see my ipod (very infrequently after a hard boot I would see it but would not be able to upload anything). Worked(s) 100% with v 6.0.
    This is very defintey 1/2 baked following in the steps of the other well known producers of sw that is not always functional/buggy the first time around.
    My computer is a x40 IBM laptop with xp sp2. Will have to wait a few more weeks to see how this pans out.
    IBM X40 Windows XP

  • I keep getting an error message when I try logging into i-tunes, what can be the problem?

    I keep getting an error message when I try logging into i_tunes, what can be the problem?

    Can you say what the message is?

  • Error 403 when I try to connect to iCloud

    I recently bought a used iphone 4 (iOS 7.0.4) and when I try to connect this iphone to icloud with my apple username and password, I get an error 403 (I haven't got any icloud account before). When I try to create a new icloud account, It tells me that it's impossible and that this iphone is not more allowed to create a icloud free account. How can I do to create a new icloud account?
    thanks

    They told me that my Iphone has reached the maximum number of iCloud accounts creations, 3 as you wrote. But I spoke to a very kind guy from the Apple assistance and after two long calls for trying to find wherefrom my problem was, he contacted Apple engineers and they allowed me to create one more icloud account with my iphone.
    So, for others who got this 403 error, it means that your ID is an Apple ID but not An iCloud ID and that you cannot create a iCloud account ... unless if you phone them maybe.
    Many thanks to Apple assistance.

  • Error message when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me below error message,

    Error message "Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit."
    when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me above error message,
    In the log it shows
    Request to office.com with the following URL:https://hostname/sites/appcatalog/config15 caused an exception. 
    System.Net.WebException: 
    Request to office.com should be routed with url URL:http://office.microsoft.com/client/15/commerce/query  but 
     request to office.com is sent with following URL:https://hostname/sites/appcatalog/config15
    and the Response from office.com was null or its HTTP status code was not 'OK'. Actual status code: 'InternalServerError'
    An exception was thrown while running task 'GetOfficeMarkets'. Microsoft.SharePoint.SPException: Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.  
    Feature "Apps that require accessible internet facing endpoints" activated in the Central Admin  .
    kindly help on this issue

    Hi,
    For a better troubleshooting, I suggest to do as follows:
    1. Check whether the App management shared service add to the Farm, and we need to configure the Subscriptions setting service also.
    2. SharePoint Server IP Address excluded from the Websense.
    3. Restart the server.
    4. Please check as the link below.
    http://www.naumanahmed.com/2012/07/sharepoint-2013-app-management-service.html
    More information:
    http://msdn.microsoft.com/en-us/library/fp179919.aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

  • When I try to use air play between my apple TV and my i-pad 2. All I get is sound and no picture

    When I try to use Airplay between my Apple TV and my I-Pad 2 all I get is sound and no picture.

    What app?

  • Ipad Locked(forgotten passcode) and error message when I try to connect to itunes

    Ok so I've forgotten my passcode to my Ipad. I have tried too many times so now the screen says Connect to itunes. When I try to connect it there is a error message saying: Cannot connect to itunes becuase it is locked with a passcode. I have never used this itunes computer with my ipad so I haven't synced or anything. Is there anything I can do to  unlock my IPad? Thanks in advance.

    If you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
    Follow the instructions for putting the device in recovery mode >  iPhone and iPod touch: Unable to update or restore

  • HT1595 I can see my wireless station, but I get error (5) when I try to connect

    I can see my wireless network, but when I enter the password and try to connect, I get an error code (5).  Restart didn't work.
    I can't reset because there is no connectivity.
    Any ideas?

    The ps3 problem tends to indicate a router problem.  Have you powered off and then back on your router?
    For the iPod try:
    - a reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Reset Network settings: Settings?|>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Error 0x80070035 when I try to connect my Laptop to Seagate central 4tb HDD

    01. I bought a Seagate Central storage 4TB hard disk yesterday. This HDD is supposed to work through a wi-fi Router.
    02. I  have a old Dell Laptop working on Window 7 basic.
    03. I have D-Link DIR 600 that links my laptop to the Seagate Central Storage HDD
    03. I have tried to operationalise the HDD. However the following is noticed.
    a)  The icon Seagate appears under Network in Windows Explorer.
    b)  On clicking the Seagate icon  I get an error message :
    "Windows cannot Access // Seagate 42....
    Check the spelling of the name. Otherwise there might be a problem with your network.To try to indentify and resolve the problems click Diagonise".
    Further in the "See detail" of the Message box -- I get :
    " Error code 0x80070035 --- Network path as not found
    When I click Diagonise I get 
    " Check the computer and devise are nearby and turned on and connected to network. Otherwise take assistance.@
    c)  Unable to use the Seagate HDD
    Please inform:
    01. Where the problem lies : a) the Laptop or   b) the  Seagate HDD
    02. Solution
    Regards,
    Himadri Ganguly

    Hi,
    can you access the share via browser?
    Please check if your NETBIOS settings are correct:
    1.   
    Go to “Control Panel\Network and Internet\Network Connections”.
    2.   
    Right-Click on the connection and choose Properties.
    3.   
    Click “Internet Protocol (TCP/IP) Version 4” in the list.
    4.   
    Click Properties, and then click Advanced.
    5.   
    On the Advanced TCP/IP settings windows, go to “WINS” tab.
    6.   
    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
    Are you using any kind of third-party firewall or anti-virus software?
    Try disabling it and then try to connect.
    Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

  • I get an error message when I try to connect my iphone 4 to my MacBook

    I have a MacBook pro (2006) and I keep trying to connect my iphone 4 so I can add music to the phone and get my pictures from my phone to the laptop, every time I plug the phone in I get an error message that reads "iTunes could not connect to the iPhone 'Kianna's Phone' Beause it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes." I don't have a lock code on my phone so I tried to just slide it to unlock it and I get a messages on the phone asking if I trust this computer so I click yes but it continues to pop up. I tried to turn on the passcode and type it in to unlock it then plug it in and also while it is plugged in then I tried taking it off again, nothing worked. I would really appreciate it if someone could help me. My phone is all updated there is no available software update.

    Presumably you have some sort of wired or wireless router.
    You will hopefully have a manual for that. There should be a login/password to let you change the way the router works usually via a web page interface, as chances are if you can see your network name but not connect it's a configuration issue.
    Perhaps someone set it up for you. What sort is it?
    If you can see the network name then (if wireless) the router is broadcasting the SSID (name essentially) - in theory you should have a password set to access that wireless network - if not then anyone will be able to tap into your network which is not ideal from a security viewpoint. It's often best to disable broadcasting the name so no one sees your network, but it's easier to configure automatically when you don't have to enter it manually into a device like AppleTV.
    AC

  • I keep getting the following when I try to connect to Itunes Radio- "An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later." I have an excellent strong connection

    For over a week,I get the following message everytime I have tried to connect to ITunes Radio..."An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later."  My internet connection is excellent & strong & "LATER " has been over a week. Any help or suggestions?? It would be much appreciated, thanks

    Somebody suggested clearing the Store cache.  I don't know why that would affect the radio.  Seems to have not worked for some, worked for a few or maybe they imagined it.  Many other posts about this if you browse the forum.
    This is happening to some people some of the time in some places, but then not affecting people in other places, or in the same place at different times.  You try to guess what is going on.  Hasn't happened to me.  Maybe it's my iTunes 7.5, or maybe it's luck of the draw since I never use iTunes radio.
    Complain to Apple:
    http://www.apple.com/feedback/itunesapp.html
    Oh, don't expect Apple to say anything about this -- that's not their style.

Maybe you are looking for

  • No sound in any software.

    Good evening. Half a month ago I discovered to my dismay that the laptop no longer was producing any sound. I've troubleshooted this entire week, and I think I'm ready to ask around on the forum. I've tried pretty much everything to my knowledge only

  • Putting two tracks together

    I have one music track, to which I'm trying to add an already recorded voice track. when I drag this aiff into GB, it goes from about 10 sec long to about 6. why is this, and can I make it stop? Thanks.

  • Inbound proxy by HTTPS

    Hi All, i have to call from PI inbound proxy on ecc using https(and xi adapter) . how to configure it ? where to import certificate ? nwa or strust ? Regards Maciej

  • Adobe Premier Pro CC won't write tracks in Audio Clip Mixer

    Hi! For some reason the Audio Clip Mixer controls aren't functioning after I "write" the track in mix down.  The track reverts to "touch" upon play back, but nothing took hold.  Any suggestions?  Is there something I need to enable first to make the

  • Best wireless printer options for my g5

    ok, here is my question, I have a non-intel g5. Currently am splitting internet with my neighbor and the router is in his house so I don't have your typical 'network' situation. What I am looking for is a printer that I can print to wirelessly. I was