I get error -36 when I try to verify or install the EVE online dmg
I am trying to install 'EVE online' from the .dmg file I downloaded from their site (and Cnet). Each time I download it an double click to verify, it gets to a certain point and says 'error -36' read or write error. Same if I skip the verification and try put it into applications.
I've tried disk utility to repair but it says the image is ok, and I've tried the dot_clean command but it doesn't work on a .dmg as it's not a directory. I have re- downloaded and get the same thing happens. Also tried downloading through the terminal as some threads said it's because the file size is not listed right from the eve server but that didn't help.
It's a 5gig download and 10gig when installed which might have something to do with it (size)
Please help!
Error -36 is I/O error, w/o specifying if the error is in the source or the target.
So, first of all, verify your disk(s) with Disk Utility, just to make sure there's no problem there.
If there isn't, then there's a problem with the download. Consult "EVE online" (whatever that might be) tech support and user forums.
Similar Messages
-
I get error -1202 when I try to do anything in the iTunes store. What do I do?
I get error -1202 when I try to do anything in the iTunes store. What do I do?
Can you temporary disable your firewall and see whether you still get this error?
-
TS1424 i gett error 14 when i try to load itune to the iphone 5s what should i do?
can some one help me?
Hello ac3180,
For error 14, you may want to check your USB Connections.
From, Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#14
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Thank you for using Apple Support Communities.
Nubz -
I get error message when I try to load lightroom 5 -unable to laod application correctly (oxooooo7b)
what can I doSearch here or Google ... https://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
-
Hi, I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC. with my Mac i get that error.
It is true the Ithunes I get the problem.
What can I do to fix this.
I also have problem some times to conect to my Ipad to Apple tv. Some time I have to restart my Ipad to get conection to Apple t. whay is that ?
can some one help me ?Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L -
I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?
Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd
-
I keep getting error message when I try to update my iphone 3g to ios saying iphone software update swerver could not be contacted
Turn off any antivirus and firewall programs and try again
-
I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me
please replyyy i'm stuck on this like whole week
-
I keep getting error 87 when i try to install lightroom cc i donot have any other applications open
i keep getting error 87 when i try to install lightroom cc i do not have any other applications open
Hi Kevin,
Kindly provide the below mentioned details so that we can assist you appropriately.
OS version:
Screenshot of the message:
Meanwhile, you can try the below mentioned link.
Troubleshoot Creative Cloud download and install issues
Troubleshoot install issues with log files | CS5, CS5.5, CS6
Kindly collect the logs files using Log Collector Tool and send it over to us so that we can have better understanding around it
Thanks,
Atul Saini -
I keep getting error 1603 when I try to restore my iPod why?
I keep getting error 1603 when I try to restore my iPod why?
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
I keep getting "Error 5002" When I try to buy an album. What do I do?
I keep getting "Error 5002" When I try to buy an album. What do I do? I already reinstalled iTunes... not sure what this error means or how to be able to buy this album.
There's some info on your error message number in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
Help...I keep getting Error 8003 when I try to download TV shows I've bought on itunes. It says to check I have an active connection. I do! I can watch iView and SBS on demand with no problems. I had the connection checked by a technician.
What can I do?Error 8003 is described here. The article is a bit dated, but I suspect the writeup is still valid.
http://support.apple.com/kb/TS3297 -
I keep getting error (-9808) when I try to download a podcast or song
I keep getting error (-9808) when I try to download a podcast or song. I have searched the discussions & help section, but cannot find this error code anywhere. How do I fix this? Thanks. Jeff
OK, you turned off your filewall, but did you disable Norton Internet Security completely? For some issues just disabling the firewall is not enough. I once had a connection problem with Gracenote that went away when NIS was disabled, but turning off every element of NIS individually and together did not work.
Some people have found adding the following to trusted domains helped:
phobos.apple.com
phobos.apple.com.edgesuite.net
http://docs.info.apple.com/article.html?artnum=93434
Occasionally flushing the DNS Resolver cache helps:
http://docs.info.apple.com/article.html?artnum=304084
Are you able to connect to the store normally with just downloading affected, or is there a general store connection problem?
The other thing is have you run your network diagnostics from the iTunes Help menu? Posting the result might help. -
I get error 21 when I try to restore i tunes
I am getting error 21 when I try to restore I tunes
Basically that error occurs when itunes verifies the restore with apple and apple doesnt allow it so for that what u ll need to do is that
If you use a mac
Press Shift+command+g in finder
type "/etc"
find "hosts" and drag it to your desktop
delete it from etc
restore and once your idevice is restored put it back
if you use a windows
Press windows button+r
type "system32"
go to drivers > etc
find hosts and drag it to your desktop
delete it from etc
restore your idevice and put it back
Hope this helps -
I keep getting error 54 when i try syncing with itunes. what do i do?
Maybe here:
http://att.macrumors.com/showthread.php?t=1362080
Also try Googling for: itunes error 54
Maybe you are looking for
-
We have two iPads connected to the MacBook with two different Midi-Sessions. Now we want to connect the every Session to a single AU-Instrument to record live but don´t get it right. In Cubase we just had to choose the Sessions as Midi-Input. (Sorry
-
How to allocate the processes to various drives?
I am ready to render my movie project come hell or high water! Could you please descirbe specifically which processes you would allocate to which drives on a quad core PC during the rendering process & what names you would give them. I have a brand n
-
Is there any way to find an ipod touch with out the "Find my Ipod" App?
Could I have some one else track it down like some one from a apple store?
-
Error in Special GL Z for vendor
Hi, I have created one special GL Indicator 'Z' for Vendor for giving advance octoroi to vendor. I have created this 'Z' with reference to 'A'. Now when i am posting entry using special GL Z in F-02 (& not in F-48), then i am not getting baseline da
-
Grey out Delete button in VA42 - change Service and maint. screen.
Hi i have the requirement to hide "Delete" button in the serial-material screen of the line item of a contract. VA42 -> enter contract number. select one line item. Go to "Extras" -> Technical objects