I get error code 0x80020063 when attempting to burn discs, HELP!

I've been trying to burn photos on to a disc from my desktop and so far every one of them has been spit out with the error code 0x80020063. Then the disc is halfway burnt and unreadable. This is my third mac and I've never had this problem before!

See = https://discussions.apple.com/message/16648829#16648829
Hope it helps.

Similar Messages

I get error code -8058 when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder

I get "error code -8058" when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder. "Alt +Drag" works. Any ideas?

Have a look at the 'More Like This' to the right - seem to be some solutions offered: >>>>>>>>>>>>>>>>>

Why do i get error code 0x80020063 when burning pics to CD in Finder? Burns from iTunes fine

Why do i get error code 0x80020063 when burning pics to CD in Finder? Burns from iTunes fine

Hey Ken 17,
Thanks for the question. I understand that you are experiencing issues burning a disc in Finder. The following resource may provide a solution:
OS X Mavericks: If you have trouble burning discs
http://support.apple.com/kb/PH13990
Thanks,
Matt M.

I am getting error code 0x8002006E when trying to burn a DVD

Hi, I am running the latest Lion update, on my MB Pro, and keep getting the error code 0x8002006E when trying to burn a DVD. Could this be a dirty lens issue in the drive. I see that many others have had the same problem, but relly cant seem to find anyone that has a solution that works.. Help

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

Keep getting error code -50 when trying to burn a disc. how do I solve this?

Does anyone know how to solve the problem of getting "unknown error" code (-50) when trying to burn a disc? I don't know how this happened

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

TS3297 keep getting error code 5002 when attempt to purchase music

code 5002 when attempting to buy music

This alert is often the result of an issue with verifying your billing.
Quit iTunes.
Open iTunes.
Test the issue.
If it persists, sign in to store.apple.com using your iTunes account
Click on Change account information
Modify or remove your credit card information.
Click Continue.
Test the issue.

Error code 0x80020063 when trying to burn cds. HELP PLEASE

I have a brand new Macbook Pro, less than 90 days old and am having CD burning issues.
Every other cd I try to burn it fails at the end when it goes to verify the CD. This is getting old as I am throwing away half my CD's. I have searched all over and cannot find a fix. HELP, whats the deal here.

If this is the error (error code 0x80020063) then it may be happening on verification. The second time it occurred I popped the disk back in and ran disk utilities to verify the "faulty" CD. It came up clean. When I double clicked on it, all the files I had copied were there. I even opened a few to make sure. It may be a spurious reading—at least it was in my case. Hope this helps.

TS4522 What is the problem when I get error code 0 when trying to burn a DVD. It stops around 60-some %.

I have tried twice to burn a DVD, and both times I get error code 0 at about 60-some % of the transcoding. I haven't had any trouble burning DVDs before now.

I had a friend with similar problem, not sure of cause. Happened when sharing to Apple device as well.
Apple said to delete all files in Render folder. We did not try that as-
Problem changed slightly for us, in that Share to 'Apple device 720' got to 50% and pretended to have completed its operation, but no file found in Project Share folder.
We found then, if the timeline clips where highlighted it would share, where previously it had repeatedly failed.
Hope that helps

Why do I get error code -8003 when attempting to empty the trash?

I moved a number of folders from a back-up drive (using Time Machine) to the trash, and have had no success in getting them out of the trash. Option+Empty, Option+Secure Empty Trash, after using Disk Utility to repair permissions and then try again, and the TrashIt! app.. nothing is working. I'm not in need of the space, I just want to get rid of the items. Any assistance would be greatly appreciated, as I can't even find 'Error Code -8003' anywhere. tx

The reason why some of the files are blocking the trash from emptying is because of specific ".app" files from third party companies like Adobe products. Not the user files or the various help documents but instead the actual mother program. Here's how to fix this problem:
1) remove from the trash all the actual software programs like Photoshop, InDesign, DreamWeaver and so on and put them on the desktop.
2) Command "I" (info) and when the dialog box opens go to the "Name & Extension" text box and remove the ".app" from the software name. Example: Photoshop.app change to Photoshop.
3) the program icon will change to a "folder icon".
4) put the folder icon back into the trash and you should be able to now empty the trash.
If you continue to get the error code 8003 it's because you may still have one or more software programs in the trash that needs to go through this process. Remember - it's not the user files or help documents or supporting files that is causing this but instead the "actual product programs".
JKai

Why do I get Error Code 35 when attempting to mount external hard drive?

When I use Finder to Go, Servers, Connect to Server I am prompted to enter password. After I do that I hit Connect again which connects to the Server (Airport Extreme) and I see the external drive highlighted but then gives me Error Code 35. I had it working earlier but something is now obviously messed up. I have rebooted, restarted, hard restarted Airport, disconnected and reconnected hard drive. Help!!!! Does anyone know what Error Code 35 means on OS 10.4.11?

Error code -35 means "No such volume; volume not found". Not terribly helpful.
You have already tried everything I would have suggested. Maybe someone else will have some suggestions?

I get error code 0x8002006D when trying to burn images to dvd

I purchased some Verbatim DvD-r's from the Apple store; I made an iPhoto burn that worked fine. However, I need a disk that I can open with anything, for archival purposes. I exported to an external HD, as well as to the disk itself from iPhoto, but I keep getting the error code. ANy ideas? Thanks!

2 things there is Media available but you must be careful to read the packaging carefully.
16X Maxell DVD-R reads that it will burn at 1X,2X,4X,8X, and 16X.
Next there is a huge difference in Quality of the Media you purchase.
http://www.digitalfaq.com/media/dvdmedia.htm
As you see the Maxell is one of the highest in Quality.
My advise is to always go for quality over price (cheaper) is one of the largest causes of burning problems.
Another important thing to remember is DVD-R Media is the most widely used and recognised by the majority of computers (especially the older ones).
http://www.videohelp.com/dvd
Please understand there is not only a big difference in the Optical Drives installed in the different Apple Computers, but the Media, Speed and Format they are capable of using. This is the reason For the Media I suggest.
It covers the correct format but covers the speed problem as well, for older and newer burners as well.
Don

HT1386 I get error code 1156 when attempting to sync my iPad. It says iTunes unable to sync with an unknown error

When trying to sync my 1st generation iPad I get an error message stating that iTunes was unable to sync due to an unknown error (1156). Any suggestions on how to deal with this are greatly appreciated.

iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom
Message was edited by: Texas Mac Man

How do I override "error code -61" when attempting to put things in the Trash? Cannot empty Trash or use Secure Empty Trash.

How do I override "error code -61" when attempting to put items in the Trash? Cannot empty Trash or use Secure Empty Trash. I have a MacBook OS X 10.5.8

The reason why some of the files are blocking the trash from emptying is because of specific ".app" files from third party companies like Adobe products. Not the user files or the various help documents but instead the actual mother program. Here's how to fix this problem:
1) remove from the trash all the actual software programs like Photoshop, InDesign, DreamWeaver and so on and put them on the desktop.
2) Command "I" (info) and when the dialog box opens go to the "Name & Extension" text box and remove the ".app" from the software name. Example: Photoshop.app change to Photoshop.
3) the program icon will change to a "folder icon".
4) put the folder icon back into the trash and you should be able to now empty the trash.
If you continue to get the error code 8003 it's because you may still have one or more software programs in the trash that needs to go through this process. Remember - it's not the user files or help documents or supporting files that is causing this but instead the "actual product programs".
JKai

Getting error code 8018001E when updating phone

I am getting an error code 8018001E when attempting to update my Nokia 900 phone.
Background:
On Jan 30th I saw that the 7.8 update was available so I plugged my phone in to my Win8 computer, Zune started up and notified me that the update was available.
I started the update, and had to step away from the computer for a moment.
In that moment my wife sat down at the computer and switched to her profile.
When I got back, I expressed my concern about her switching profiles during the update but she needed to show me something.
I then switched back to my profile and saw that Zune was at step 6 of 10, restarting my phone the phone was however had the "data transfer mode" graphic showing .
I waited about 10-15 minutes, and decided something went wrong.
switching back to my wife's account I saw that her copy of Zune had started and was on a screen saying that the update had failed and that the phone would need to be restored from the last back up.
Closing this returning back to my account I attempted canceling the update and closed Zune.
When restarting Zune I was prompted to 'Restore' the phone and clicked OK/continue/next whatever it is.
I believe the phone then restarted and the restore process completed.
My phone was now reset back to last August (the last update) loosing the last six months of texts/game saves/applications added/etc...
Plugging the phone back in I was prompted to update the phone I accepted and the update(s) completed without issue giving me windows phone 7.8.
This morning I plugged the phone back in and was prompted to install another update (Nokia specific no details as to what it is)
When updating the phone gets through step 7 of 9 then seems to reset and restarts the phone then tells me there was an error updating giving me the error code 8018001E
This code does not seem to be common error (not listed in the standard MS help wizard) But I do see some references to an issue on the Mango update on the LG E900 that appears to be resolved.
(http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/lg-e900-update-error-code-8018001e/1ec8d5...
Looking at my phone the os and firmware versions are below
OS version: 7.10.8858.136
Firmware revision number: 2175.1003.8112.12085
Looking at the Nokia website I see the latest firmware for the 900 should be:
2175.2307.8858.12480
(http://www.nokia.com/us-en/support/product/lumia900/)
So I am guessing that this update is attempting to update the firmware.
Any ideas?
Thanks

While we feel your pain, the actual update is handled by Microsoft through te Zune update function. As such I would advise you to contact them on this issue.
Nokia Support Discussions is a user to user forum so you will not find a direct response form Nokia here.
Again, contact Zune/Microsoft support here.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

I keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

i keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I get error code 0x80020063 when attempting to burn discs, HELP!

Similar Messages

Maybe you are looking for