I get Error Code 1 when using the installer. Please advise.

When running the installer, it quits with the message: Error Code 1. Please advise how to resolve @this error.

Gener7: Good morning. Thanks for speedy reply. I’m running Windows 7 on a Dell Studio laptop computer. I have CS6 installed, and it runs okay.
I ran the CC Cleaner tool to uninstall Photoshop CC. PCC kept crashing every time soon after I tried editing an image. I gave up. After the cleaning, I tried to re-install PCC. The error code 1 showed each time I ran the installer.
Please advise.
Thanks.
==============

Similar Messages

My Application gets Error 37 when using Serial Port VIs.

My Application works fine developed with LV 6.1. Then I updated to LV 7.1 and now the Executable of my application gets error 37 when using the old serial port functions. The "serpdrv" file is located in the application directory and is from 02/2002. The application runs well in the development environment after I placed the "serpdrv" file in the LabView directory. I tried to put a line with "serialDevices=..." in the .ini-file of my application but this did not cause an improvement. I also tried to rebuild the EXE with this line in the "labview.ini" file but nothing changes.
Does anybody have another idea ?
Many thanks for help
Thomas

>Did you actually replace the old serial functions that come with 7.1 with the functions from 6.1?
Yes. E.g. "open serial driver.vi" uses "open device" with "serpdrv" as device string.
I had the same problem running my application as VI´s. After the copy of serpdrv into the LV 7.1 directory everything works fine.
I don´t understand why the application running as a .exe doesn´t find the serpdrv when it is in the same directory....
Nevertheless many thanks for your answer
Thomas

Can't get my mail when use the USB Ethernet adapter

I can't get my mail when use the Apple USB Ethernet Adapter. If I use a wireless connection, there is no problem. The LAN which I'm trying to connect is behind a proxy server but the Internet is working 100%.

Hi ViK,
This sounds like a question for the network administrator of the location. Without knowing how the proxy is set it's impossible to know what it's blocking (incoming/outgoing). It sounds like it might be filtering the incoming mail server.

Why do I get bright colors when using the smudge tool?

Why do I get bright colors when using the smudge tool?

Thank you!!!
*Caryl *
(my flickr page ↓)
*https://www.flickr.com/photos/feathersarenice/
<https://www.flickr.com/photos/feathersarenice/>*
We were all born mad. Some remain so.
"Reality is whatever refuses to go away after I stop believing in it."
Philip K. Dick

I just got a new computer and I am haveing trouble loging on to I tunes I keep getting error code 9808 is the itune store down?

I just got a new computer and I am haveing trouble loging on to I tunes I keep getting error code 9808 is the itune store down?

Check out this Apple document -> iTunes Store: "An unknown error occured (-9808)"
You'll probably have to make sure the date and time is correct on your computer.

Iphone 4s getting hot up when using the network. is it a sim problem

iphone 4s getting hot up when using the network. is it a sim problem or battery problem?

You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

Error Code A12E6 during the installation of Acrobat XI Pro. Help?

Hi, I successfully downloaded trial version of Acrobat XI Pro, but ran into problem when I clicked Adobe Application Manager. The dialogue says:" Sorry, there seems to be a problem with the installation process (Error Code: A12E6). Can someone please help?

I suggest that you ask in the appropriate Acrobat forum (this is the forum for Acrobat.com online services). And tell them your operating system.

Getting error message when using 'wlappc' task

When using the 'wlappc' custom ANT task I am getting following error message
D:\Working\Build\LocalBuild.xml:122: java.util.MissingResourceException: Can't
f
ind bundle for base name weblogic.i18n.J2EELogLocalizer, locale en_US
Any help what I need to do to get rid of this error?
regards
Abanindra
[ErrorLog.txt]

Download:
Microsoft Office 2010: Primary Interop Assemblies Redistributable
How to: Add or Remove References By Using the Add Reference Dialog Box / How to:
Add and Remove References in Visual Studio (C#)
Olaf Helper
[ Blog] [ Xing] [ MVP]

Why do I get Error -1073807343 when calling the open visa function ?

Hello,
I am running a Labview 6i under Linux (kernel 2.4) and I have Error -1073807343 when calling the open visa function. I have verified the name of the session (GPIB0::9::INSTR), and I can communicate with my instruments with ibic.
More informations : I use NIVISA 2.5 and nigpib-0.8.2. I have downloaded the lastest drivers of my instruments but it doesn't work better.
Thanks very much for your help.

We've had several NI-VISA releases since 2.5 - so I suggest you upgrade to NI-VISA 3.0. While there isn't anything specific to your type of problem in the Linux version of our readme.txt, I know we've made a number of other fixes.
While the most recent release is NI-VISA 3.1, I still recommend you upgrade only to 3.0.
This is because NI-VISA 3.1 requires the new NI-488.2 release for GPIB-ENET to be installed (even though you aren't using that product). This is due to some internal rearchitectures, and the PCI-GPIB product is not released. If you do want to go with NI-VISA 3.1, the new NI-488.2 release for GPIB-ENET on Linux will still work with the PCI-GPIB beta driver that you have installed.
Dan Mondrik
National Instruments

Can't erase hard drive on my PowerBook G4 when using the Installer CD

Hi,
I am trying to erase the hard drive on my old Powerbook G4 so that I can donate it. I followed the instructions by booting up the laptop using the Installer CD. Every time I select my hard drive in the Erase window and click the Erase button, it just checks the volumes and then it dims and nothing else happens.
After multiple failed attempts to erase the HD, I decided to quit the install CD and simply remove the HD altogether. I pressed the "Option" key in order to avoid starting up from the CD, but it is not working. I am unable to return to my original settings. All I see now is an arrow on the right hand side of the blue screen and a circle with an arrow on the left side. Pressing the arrow does not result in anything.
Any suggestions would be greatly appreciated.
Thanks!

Thanks for responding.
Yes, I tried everything yesterday. It only allowed me to verify the disk and not do any repairs. This computer has some major issues so I am not surprised. Since it was destined for recycling anyway, I decided not to waste any more time on it, so I removed the hard disk instead and am about to ship it off.

I can't get my ipod classic (120GB) to work. I am getting error code 1434, and the ipod is making a lot of clicking noises when plugged in

After coming back from Hawaii, my Ipod classic doesn't work anymore. When plugged into itunes, it says that it may be corrupt, and that I need to restore it. I have tried this, but everytime it gives me an error code of 1434. When I click more information, it sends me to a support page, but not for error code 1434. I tried all of the steps on the page hoping that it would help. Also my ipod is making a lot of clicking noises when it is trying to run, alomst as if it is skipping inside and can't fully run. Can anyone help me ?

Clicking sounds from an iPod that has a hard drive for storage is not a good thing. It usually means the hard drive is faulty. That is the likely reason for getting an error during the attempt to Restore.
If you use a Mac, you can try putting the iPod into Disk Mode
http://support.apple.com/kb/ht1363
If it goes into Disk Mode, connect the iPod and instead of running iTunes, run Disk Utility. Does the iPod appear in the Disk Utility sidebar? If it does, select the iPod device in the sidebar, not the volume indented below the device (if there is one). Go to the Erase tab. Set the Format to Mac OS Extended (Journaled). Name does not matter. Click on Security Options and choose to write a single pass of zeros over the entire disk. This serves as a good "stress test" for the iPod's hard drive. Back on the main window, click Erase.
This takes longer than a regular erase, but you should see steady progress. If it errors out, or stalls for a LONG time (like hours), the hard drive is likely to be faulty.
If it completes successfully, quit Disk Utility, run iTunes and try to do another Restore

We randomly get the "specified Group is in use" error message when using the DIO Buffered Handshake In VI. How do we get rid of this?

We're using the DIO Buffered handshake in VI (PCI 6503 Board) to read TTL pulses from a wavemeter. Sometimes we are able to collect data, but sometimes we get this error message: "specified Group is in use". No matter how long we wait between taking data, we sometimes (yet not always) get this message. We have one group of 2 ports that we're reading. Is there a way we can get rid of this problem?

Hi,
Are you running any example program or your own?
1. This problem happens when you abnormally terminate the program, such as, by clicking on the abort button.
Say first time you run the programd and it runs fine and then abort the program. In that case, the DIO group is not cleared and hence the subsequent runs give the error that you said.
In such case I would suggest you to open the Device Reset.vi which is under Functions Pallete>>Data Acquisition>>Calibration and Configuration>>Device Reset.vi.
On the front panel of the Device Reset.vi, enter the device number of your card and run the Device Reset.vi. If you get an error on the front panel, then run again so the error goes away. Now run you DIO program and it should run fine.
The botto
mline is, dont abort the program. If it has no functionality incorporated to stop it depending on some condition, then incorporate it.
Please do let me know if my suggestion helped.
Sincerely,
Sastry V.
Applications Engineer
National Instruments

I keep getting error codes when attempting to publish using FTP...

"The operation cannot be completed because one or more required items cannot be found. (Error code -43)." That pops up before I can enter my FTP password.
The other one is not popping up right now, but when I finally was able to enter my FTP password, another error code pops up. It was -36. Can't remember the words.
Please help me. I NEED(ed) to publish this website yesterday! Thank you!

I got it to come up! The other error code says "The Finder cannot complete the operation because some data in "ftp://[email protected]" could not be read or written. (Error code -36)"
This is the on that pops up only after I enter the (correct) FTP password.

Getting error 3001 when using Excel Easy Table.vi

When making a call to Excel Easy Table.vi (Report Generation Toolkit) I get a 3001 error.
I have attached an example VI to demonstrate the problem. Please run "Add Table Example.vi" in the attached zip. This sample program is made up of VIs from a larger program, so it made more sense to create a sample program and only include the required VIs than include the entire large program. So that is why the Report class wire comes from a functional global VI.
What is a bit strange is that Excel Easy Table is used to write a summary table at the top of the spreadsheet successfully in "Initialize Report.vi." It is only when I then make the additional call to Excel Easy Table in Add Table Example that I get the 3001 error. If you have any ideas why I'm getting the 3001 error, please let me know.
I'm using LabVIEW 8.6 and RGTK 1.1.4.
Thanks,
Joel
Solved!
Go to Solution.
Attachments:
Add Table Example.zip ‏113 KB

Hey Joel,
I figured out why this error was occuring. After comparing how you were adding the columns in the Report Write Info Table.vi in the Initialize Report.vi to just using the Excel Easy table VI, you hadn't provided a reference to which worksheet it needed to write the data to. I changed your code to include this reference and it worked perfectly without any errors. I have attached a .zip file with those changes so you can look at it.
FYI: Don't try to use this code as a direct replacement with yours. In order for me to reproduce the error, I had to modify several VIs in order to get it to run.
I hope this information helps you with it.
Jim St
National Instruments
RF Product Support Engineer
Attachments:
Add Table Example.zip ‏146 KB

Why do I get error "-1074388952" when using CANopen?

Hi there,
I built a VI to communicate over a PXI-8461 with a servo controller from SEW-Eurodrive. I use the LV CANopen Library, please see the attached VI! When starting my application, I use the init case, during runtime I change the settings of the servo controller with the "write" case and finally in the "stop" case I close and kill all objects I previously created
There is no communication from the controller to the PC, I only send a PDO to the controller. Although there is no "read"-function in the VI (necessary), after some time I get the mentioned error, please see the other attachment! After confirming the error dialog with "continue" or "stop", I'm no longer able to communicate with the servo controller. How can I prevent my application from hanging? And is it possible to reset the CAN-Card from within my LV 8.5 application? Currently I have to reboot the whole PC to do that, otherwise no new communication is possible...
To say it with the Scorpions: "Is there anybody there who feel's that vibration?"
Does anybody have an idea?
Thanks in advance for any help
Regards
Achim
Attachments:
error.PNG ‏12 KB
SEW_EncoderDriveControl.vi ‏58 KB

Hi Dirk,
thanks for the answer...although it really not gets me any further.
I already use a PXI-8461 Series 2 CAN-Board! What do you mean when you say "high busload"? I have to communicate with 500kBaud because the SEW controller expects this rate. I only transmit new parameters in "single shot mode", meaning I fire new values (8 bytes) event-based (button push). As I mentioned I do not transmit any data from the controller to my LV application.
Sometimes it's also not possible to reset the board in the MAX, then there reamains a exclamation mark on yellow background on the board icon.
I still receive another error message (something like "PDO write object does not exist") when I changed nothing for quite some time and then try to transmit new parameters on an object I successfully used several times before. Sometimes everything works fine until I try to stop communication...then sometimes a error message pops up saying something similar, like "Synch Object does not exist". It must have been existed, because if not, the SEW controller would not have been working because it expects this cyclic synch.
Do you (or anyone else) have a clue?
I found the ncReset.vi in the NI-CAN library and I am going to test it ASAP. Is there any difference in the use between "your" method with the (ncAction.vi + Reset) and the direct use of ncReset.vi? I'm going to code a automatic reset with that function in the case that one of the mentioned errors occurs. Do you think it's possible to automatically reset and then reinitialize my CANopen session? Or will I get some other strange errors?
Hoping for a helpful answer:
Achim
Ahhh...before I forget it:
Seasons Greetings! Have a cheerful and happy christmas time!

I get Error Code 1 when using the installer. Please advise.

Similar Messages

Maybe you are looking for