I get error "This operation is not permitted" after creating form and opening it in Reader...

Hi,
I am very frustrated with this form I have created. I created the form in Acrobat 8 but could not get it allow changes to be saved until I chose to "distribute" form. I did that and now have a form that can be caved once filled out however when you open it you get the error "This operation is not permitted".
From reading some other posts, I have done the following:
Checked security settings and they do not fix it.
Checked that all fields were form fields and they seem to be.
Checked restrictions listed in purple bar and there were none.
Checked for "unembedded" fonts and there were none.
I think using Acrobat 9 might help me but I do not want the expense as I only use Acrobat for forms like this once a year.
Does anyone know what is going on here and can maybe help?
Thanks,
Sean

I'm having the same problem. Have you already found a solution?

Similar Messages

Getting error : This operation is not supported on a report server that runs in native mode

Hi,
I have installed SQLServer2008 Standard Edition in my system.
Using SSRS 2008.
I have added
http://<serverName>/ReportServer/ReportService2006.asmx as web reference in my project.
If i consume any method in ReportingService2006 am getting below error .
This operation is not supported on a report server that runs in native mode. ---> Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: This operation is not supported on a report server that runs in native
mode.
How to solve this problem?
Thanks,
Thangakumar

Hi Thangakumar,
In Reporting Services Web service, there are two endpoints available for managing objects on a report server, ReportServer2005 and ReportServer2006. The
ReportService2005 endpoint is used for managing objects on a report server that is configured for native mode. The ReportService2006 endpoint is used for managing objects on a report server that is configured for SharePoint integrated mode. From you description,
your Reporting Services runs in native mode, but ReportService2006.asmx is used for SharePoint integrated mode. If you need to call Reporting Services Web service in native mode, please change the address to:
http://<serverName>/ReportServer/ReportService2005.asmx
If you need to call Reporting Services Web service in SharePoint integrated mode, please change the address to:
http://<Server Name>/<Site Name>/_vti_bin/ReportServer/ReportService2006.asmx
For more information, you can refer to:
http://msdn.microsoft.com/en-us/library/ms155398(v=SQL.100).aspx
Thanks,
Albert Ye

Getting error with crawling Lotus Notes item after install SP1 and 2014 July CU

We are using the SharePoint out of the box Lotus Note collector to crawl Lotus Notes, and it was work before I install SP1 and July CU.
After I installed those patches, I got below error when crawling in crawl log:

Hi,
According to the error message, it says that SharePoint cannot find the Lotus Note addresses. So please check the content source for Lotus Note is correct.
Reference:http://consultingblogs.emc.com/randyrempel/archive/2013/03/24/installing-and-configuring-the-lotus-notes-connector-for-sharepoint-2013-server-part-2-of-2.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Unable to submit a Reader-enabled PDF: "This operation is not permitted"

Hi I've looked through the forums but haven't found an answer to this particular query: I've created a simple form (text boxes, radio buttons, and a submit button which should send the entire PDF to an email address). I have tried different options:
Reader enabled the form, then saved it and emailed a copy to a friend to test. When he clicked on "submit" he received the error "this operation is not permitted". Unfortunately I didn't ask what version of Reader he has. The form was created in Adobe Acrobat X.
Did not reader-enable the form, but opened it with Adobe Reader XI. When I click on submit I get a "server connection error". I'm using Gmail, Chrome and Windows 7 (I went to Start > Default Programs and was able to associate "MAILTO" with Chrome, but there is no option to actively choose Gmail as my mail client). p.s. Before submitting the form I checked and my internet connection is up and running.
I tried to submit the form from Acrobat X and I get a similar error, "Acrobat is unable to connect to your email program".
There are no unembedded fonts or hidden objects in the PDF.
Any help would be greatly appreciated!
Melissa

Submitting forms by email isn't really submitting. In my view it's a useful quick test, but not suitable for production use. For reasons you've already discovered. A particularly bad case is where a user uses GMail (or whatever) but has a WORKING email client that accepts the mail; but then it goes nowhere because they never set it up.
Submit really means "send to a web server" (where a script written by a professional will handle the data). Like the forms on every web site.
Web sites COULD "submit by email" too, but they don't because it isn't any good.
(Caveat: some big companies control the email set up exactly, and it can work for them.)

When Submitting - "This operation is not permitted" ERROR

Hi Guys,
I'm new to LiveCycle and have created a whole array of online PDF forms that users can fill in and submit over the internet. The form is then received at the company end as a PDF attachment. Everything is going great until the company changed from a POP3 server to an IMAP server (I think they are using Microsoft exchange server?)
Now when they go to submit the form after filling it in they get the following message.
"This operation is not permitted"
Is there any information people can give me to help with this. Obviously this is quite urgent, so any good tips that can help me I would appreciate.
Perhaps there is a way to send the PDF without it loading outlook and sending it?
ANDY LANGHAM

It depends on what version of Acrobat you're using.
See this other thread for more details: http://forums.adobe.com/message/4896660

"This operation is not permitted" when saving PDF through a plugin

Not sure what I am doing wrong. It appears as though I've followed the PDF Reference and documentation correctly, but I am getting this error when my plugin trys to save my PDF file to a new location (dont want to overwrite the original).
Here is the sample code. I hope what I am doing wrong is easy to fix.
PDDocClose(currentPDDoc);
ASPathName filePathName = ASFileSysCreatePathName(NULL, ASAtomFromString("CString"), replacedSavePath.c_str(), 0);
PDDocSave(currentPDDoc, PDSaveIncremental | PDSaveLinearized, filePathName, ASGetDefaultFileSys(), NULL, NULL);

Ahh the problem was that the file was secured with a password. The documentation mentions:
Known Exceptions
Raises
pdErrOpNotPermitted if saving is not permitted. Saving is permitted if either edit or editNotes (see PDPerms) is allowed, or you are doing a full save and saveAs is allowed.
So I looked for that exception in the docs and it said:
pdErrOpNotPermitted
This operation is not permitted. Acrobat
security does not allow content copying
or extraction. These operations should
be permitted when the document’s
master password is used.
So for anyone getting this error, try removing security from the file first.

"This operation is not permitted" appears when re-saving/distributing a form.

I have a form that I created using Adobe LiveCycle Designer (ver 8.0) which I saved and distributed several months ago and has been working fine. Now even if I make no changes to the form, if I save and Distribute it again, the message “This operation is not permitted” appears when the re-distributed form is opened in Adobe Reader. If I make no changes to the form and DON'T save it but I do Distribute it, it works fine. I made sure that "auto select" was set for all of the fonts--as suggested--but it made no difference. What else might be causing the problem? The error message is not very helpful. Thanks in advance.

Ahh the problem was that the file was secured with a password. The documentation mentions:
Known Exceptions
Raises
pdErrOpNotPermitted if saving is not permitted. Saving is permitted if either edit or editNotes (see PDPerms) is allowed, or you are doing a full save and saveAs is allowed.
So I looked for that exception in the docs and it said:
pdErrOpNotPermitted
This operation is not permitted. Acrobat
security does not allow content copying
or extraction. These operations should
be permitted when the document’s
master password is used.
So for anyone getting this error, try removing security from the file first.

Error "This operation is available only for certified forms"

We have developed the Adobe form in Webdynpro ABAP (NW04S SP9).When we test the form in the ABAP side it works fine. But when we deploy the form in the portal and try to perform the same action we get the error "This operation is available only for certified forms". Could someone let us know what the problem could be?
thanks

the first thing to check would be that there's
no logic error in your application that's causing multiple threads to try to close
the same folder.... and if there is, note that there is a timing-window problem between calling imapFolder.isOpen() and imapFolder.close(). Only one thread should be doing this anyway.

Error: Common entries are not permitted for plan queries and input queries

Hi,
I have a 2 selections in the column struct:
1. year = 2005, version = actual
2. year = 2006, version = plan, marked as data can be changed using user entry or planning function
row has posting periods from 1-12
in the workbook I have inserted this query in the workbook in analysis grid. it runs good.
now i added a button and assigned planning function to it. this planning function copies 2005, actuals to 2006, plan.
when i execute the workbook and hit this button, it gives me following error:
"Common entries are not permitted for plan queries and input queries"
please can anyone provide me assistance with this issue.
thanks,
sam

when i go to diagnosis it displays following:
Diagnosis
InfoProvider ZIP_PLAN2 must be described in this application by both a plan query and by a input-ready query, which is directly defined on the InfoProvider ZIP_PLAN2.
System Response
This is not permitted.

Capture error-"this operation could not be completed as there is no video"

Help!!
Project Due to client very soon. I've got my XL2 hooked up to my mac and capture was fine until the above(subject) error message popped up. All connections are tight, and I've tried changing, switching and trashing preferences. I spent a 100 bucks for 15 minutes of support from some FCP support company, there solution was temporary. They had me Turn off the G5, and disconnect everything. Upon restart capture worked for about 10 more minutes then error message popped up. Don't know what else to do, don't want to spend a 100 more dollars?
Help!!!!

Canon cameras are notorious for not behaving if you have any other FW Devices working on the System - this includes External Hard Drives.
Try removing any other FW devices - then re-setting the FW Bus as Jerry suggested. THEN connect up your camera and turn it on (VTR mode) - THEN start your Mac.
Don't pay anyone for support - it's all here - for free!
Good luck,
Andy
G5 Quad 8GB. 250, 500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

OC4J not running after creating workspace and projects.

Created one workspace and added six projects. Added PostGes jar to library manager. Before doing this, the OC4J would run a test application successfully. After creating the workspace and project, I created another simple workspace with two JSP, on linked to the other. When trying to run this project get the following:
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
Apr 17, 2008 10:51:55 AM oracle.j2ee.util.LoggingUtils logAndReturnMessage
WARNING: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2072)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:2017)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1272)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:345)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:206)
     at com.evermind.server.Application.setConfig(Application.java:438)
     at com.evermind.server.Application.setConfig(Application.java:339)
     at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1895)
     at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1651)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1034)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.resource.ResourceException: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:106)
     at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:330)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2053)
     ... 11 more
Caused by: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:283)
     at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:108)
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
     ... 13 more
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: org.postgresql.Driver
     Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
     Loader: oc4j:10.1.3
     Code-Source: /C:/Jdeveloper10/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in META-INF/boot.xml in C:\Jdeveloper10\j2ee\home\oc4j.jar
Remove the posgres jar from the library manager and still not able to run simple two page applications.
All the projects in the other workspace compile fine. The prolblem is that now I am not able to use the internal OC4J. I remove the workspace with the five projects, and the JARs and the two page app will not run.
The OC4J is running when launched from the IDE, ti just can find the pages.
New install of JDEV and the two page app will run fine. Add two user two user libraries and the app will not run.
Thank you,
Ben Carter

Do you have a database connection to postgress defined in JDeveloper?
JDev might be picking this up and trying to add a datasource for it to the embedded OC4J - so try removing it, or alternatively add the postgress JDBC driver jar files to the libraries node under tools->embedded OC4J preferences.

Keep getting error "this url is not valid and cannot be loaded" in web sites, links, favorites.

While trying to open links in email, or on websites I get this error alert. Also happening when trying to open links to web pages in favorites. Does not happen when using IE 8. I'm using Windows XP, and Norton 360

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

HT4101 When I plug my USB adaptor into my iPad 2 and 3 I get error this accessory is not supported by iPad

I have a apple USB adaptor and I keep getting the error accessory not supported

On the iPads...
1: Make sure the Dock Connectors are Clean and Free of Lint.
2: Try a different Cable.
3: Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Whenever I open pdf file link in net shows a message box Acrobat plug-in and message as "This operation is not allowed" and after firefox getting crashed. I observed twice

Details of Crashing Information
AdapterDeviceID: 2562
AdapterVendorID: 8086
Add-ons: {d47a9f51-8281-43fa-f450-f28ef8735e9a}:2.1.1,[email protected]:3.6.5.112,{972ce4c6-7e08-4474-a285-3208198ce6fd}:4.0
AvailableVirtualMemory: 1923440640
BuildID: 20110318052756
CrashTime: 1304770256
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536

I'm replying to this old thread for anyone looking for this problem in the future ( like I did ).
The problem for me was that the original .pdf had a single blank comment in it.
I opened it in Acrobat pro, deleted the comment, saved, opened it in livecycle, changed the illustration ( or whatever you had to change in the first place ), save it again, opened it in Acrobat and save for Reader Extended PDF.
It now works
PS: nice job Adobe with useless error messages. Just saying "Comments are not allowed" instead of "This operation is not permitted" would have saved countless hours to countless people.

I get error "This operation is not permitted" after creating form and opening it in Reader...

Similar Messages

Maybe you are looking for