I get just ONE shot at adding tracks to my playlist??!?

I've just upgraded to version 8, and low and behold........an issue.
I only get ONE shot at adding tunes to my new playlist. Whatever I drag in to the playlist adds just fine, but if I go back to my library and try and add ANYthing else, nothing whatsoever....it grabs from the library and when I drag it, looks normal and like it's going to go just fine- but when I let go into the playlist, does not add. I'm BAFFLED. I'm running Vista32. Anybody have any ideas? I'm getting aggravated
Thanks in advance

Sounds like some kind of wonky Vista permission issue?
Are you a Vista admin, and the owner of the entire itunes music folder and subfolders with full control?
How to Take Ownership and Grant Permissions in Windows Vista

Similar Messages

  • Recording with just one audio file per track

    Is there a way, when recording, to just have one continuous track? When recording a 2nd take on the same track (say track 1), instead of having another separate audio file for the 2nd take, I would like to have just one complete audio file instead of bunches of them. I've looked in Preferences and the menu options and have overlooked it if it's there. I hope I am being clear. Thanks.

    Hey Terry,
    I'm not sure why this is a problem - if you think about it its just like recording multiple takes on tape - you then comp the best bits to create the final 'take'.
    Also as AA streams direct to disk at some point (ie when you stop recording) AA has to close the file otherwise it would get corrupted.
    I guess it just gets a little getting used to?
    If I'm gonna do a complete 2nd (3rd, 4th etc) take then I might drag the previous take down on to a muted track (if I think I might use bits out of it) and then re-take - or just delete the previous take and re-record.
    At the end I then select File->Delete Unused Media (I think thats what its called). When all takes and mixing is completed I use this application to identify all the unused files that are not needed and that can be safely deleted - http://www.mediasweeper.com.au

  • How can I get just one menu?

    Hi,
    I hope there is a way to have just one menu, the main menu, and to have two buttons on it: one for one chapter, one for the other, not one for playing the whole movie, one for playing individual chapters. Is there a way to do that? Is there a (simple, straightforward, no frills, non-garish, NO MOTION) theme that has that setup or that can be adapter for that use?
    (I currently use Brush Strokes and I have to kill the motion every **-***** time, yet varying amounts of motion ALWAYS appear until I slide the motion duration slider all the way to the right (max) and then back all the way to the left (min/0). (Yes, I have saved a version of that theme with no **** motion but it still appears despite that.) I DO NOT WANT ANY MOTION or sound effects if I am going to use any other theme than Brush Strokes. I can kill the motion and sound but I don't want one that has a garish look or has lots of motion initially.)
    Is there a way to use the map to eliminate the second-level menu or makeit the main menu? And if there is, would I be able to add/change the main menu buttons to that they start each chapter, not play the whole movie or play individual chapters?
    Thanks so much.
    John L

    Hi
    Not so interested in bad language. Struggling to get my own understandable.
    To do what I guess You want, only way I can think of is:
    - Make each chapter as a stand alone movie
    ∆ This by: selecting clips in iMovie that belongs to Chapter one
    - Export as Full quality QT.mov BUT - remember to mark - selected clips only
    - Now select the rest (or Chapter two) and export this
    Now You just drop Your Chapter one and two into a new open iDVD theme
    window.
    To make iDVD to handle both a full movie and specific Chapters alone has
    not been implemented in an easy way - but has to be a double material
    project. Which is not so economical. Only alternative in my mind is
    DVD-Studio Pro - and this hurts even more "economicaly"
    Yours Bengt W

  • Can't get just one song to repeat-

    Hi folks- I have followed the directions to a tee- select the song and hit the repeat button twice so there is a 1 in the repeat button. However, all the songs repeat. Any advice on what I'm doing wrong?

    If the icon on the iPod looks like this...
    (but in black), then the iPod should only repeat the one track. If it doesn't, all I can suggest is that you Restore the iPod.
    Be aware that a Restore will delete everything from your iPod and put back only what is in your iTunes Library. It will take a while to complete and it is done using iTunes.
    If you don't like the idea, then the only other thing i can suggets is to put the one song in an On-The-Go Playlist and simply repeat that.
    This, by the way, is the Repeat All icon ...

  • Adding tracks automatically creates playlists

    Help!
    I have 47,000 tracks to add to iTunes and when I begin the process, it immediately creates a playlist for each album.  I stop the import immediately and delete the 20 or so playlists that have been created, go back to File > Add to Library, select my folder, click Open and it does the same thing - it adds all of the tracks to my iTunes Music Library AND creates playlists for every collection of tracks it thinks is related!!!!!  You can imagine how out-of-control this would be if I were to import my entire library!!
    I've looked through preferences for some "create a playlist for every album I import" or something along those lines but I don't see anything.  I'm running Mac OX 10.6 and iTunes 10.4.
    Please let me know what I can do to prevent this from happening!  I want control over my own, personal playlists, which I created, then exported to file, then emptied out my entire Music Library to start over again fresh.  BUT this time, the fresh start is going to cause thousands of playlists to be created on their own.
    Can anybody help me?

    You got the correct answer!  I meant to click "Correct" answer to give you the points but I clicked "Helpful" instead because I'm new to the interface and I'm really tired.
    That's what it was.  I found the m3u files and moved them to my Playlist folder, then loaded up my library and ba-da-bing!  My music is back.  Thank you!
    How can I give you the full "Correct Answer" points?  Moderator??

  • Need to chart attribute value of just one child node of XML document

    I have a XML document with (for example) 7 parent nodes, each
    parent node has 5 child nodes. The parent nodes have an attribute
    @EarlierDTS (DateTime type) that is the x-axis category of a chart.
    Each child node has an attribute @eventid which specifies the id of
    the event, and another atttribute @NumOccurs which specifies how
    many times that event occured in that period.
    How do I tell Flex I want a simple line chart of the eventID
    = 215? What if I want two lines, for both eventID=215 and
    eventid=307?
    I have studied the posts and blogs for over a week now, and
    have seen this question or similar come up quite a few places, with
    no answer.
    1) Should I focus on learning how to create a filterfunction
    for the XMLList that underlies my XMLListCollection so that the
    filtered data view is just one child node per parent node ( or two
    child nodes for the second case)? And set the filtered data view as
    the dataprovider of my chart's vertical series?
    2) Should I focus on learning how to create a XML Filter
    query that selects just one or two child nodes for each parent
    node, and set the charts' series' dataprovider to this filter
    expression? (I don't think this is allowed - but I'm checking with
    the forum members...)
    3) Should I focus on learning how to convert the
    XMLListCollection into a HierarchicalData object, and then learning
    how to filter this object so there is only one (or two) childs per
    parent? This seems like a lot of coding - I almost have to create a
    pair of classes - one for the parent and one for the child - so I
    can create nested ArrayObjects.
    4) Should I create a brand new XMLList by walking the
    original XML list, and inserting Parent nodes and just the child
    nodes that match the eventID(s) I want to chart, into the new
    XMLList?
    I believe that the easiest way would be to create a
    Filterfunction for the XMLList, and bind the chart series to the
    (filtered) XML List. But the problem with this approach is that I
    have seen more than 2 posts asking how to accomplish filtering that
    removes specific children from the view, with no solutions posted.
    Help! What is the best way to get just one child for each
    parent, from an XMLList?

    "whertzing" <[email protected]> wrote in
    message
    news:[email protected]...
    >I have a XML document with (for example) 7 parent nodes,
    each parent node
    >has 5
    > child nodes. The parent nodes have an attribute
    @EarlierDTS (DateTime
    > type)
    > that is the x-axis category of a chart. Each child node
    has an attribute
    > @eventid which specifies the id of the event, and
    another atttribute
    > @NumOccurs
    > which specifies how many times that event occured in
    that period.
    >
    > How do I tell Flex I want a simple line chart of the
    eventID = 215? What
    > if I
    > want two lines, for both eventID=215 and eventid=307?
    >
    > I have studied the posts and blogs for over a week now,
    and have seen this
    > question or similar come up quite a few places, with no
    answer.
    >
    > 1) Should I focus on learning how to create a
    filterfunction for the
    > XMLList
    > that underlies my XMLListCollection so that the filtered
    data view is just
    > one
    > child node per parent node ( or two child nodes for the
    second case)? And
    > set
    > the filtered data view as the dataprovider of my chart's
    vertical series?
    >
    > 2) Should I focus on learning how to create a XML Filter
    query that
    > selects
    > just one or two child nodes for each parent node, and
    set the charts'
    > series'
    > dataprovider to this filter expression? (I don't think
    this is allowed -
    > but
    > I'm checking with the forum members...)
    >
    > 3) Should I focus on learning how to convert the
    XMLListCollection into a
    > HierarchicalData object, and then learning how to filter
    this object so
    > there
    > is only one (or two) childs per parent? This seems like
    a lot of coding -
    > I
    > almost have to create a pair of classes - one for the
    parent and one for
    > the
    > child - so I can create nested ArrayObjects.
    >
    > 4) Should I create a brand new XMLList by walking the
    original XML list,
    > and
    > inserting Parent nodes and just the child nodes that
    match the eventID(s)
    > I
    > want to chart, into the new XMLList?
    >
    > I believe that the easiest way would be to create a
    Filterfunction for the
    > XMLList, and bind the chart series to the (filtered) XML
    List. But the
    > problem
    > with this approach is that I have seen more than 2 posts
    asking how to
    > accomplish filtering that removes specific children from
    the view, with no
    > solutions posted.
    >
    > Help! What is the best way to get just one child for
    each parent, from an
    > XMLList?
    I'd just look at a dataFunction. There's an example here that
    may point you
    in the right direction:
    http://flexdiary.blogspot.com/2008/08/charting-example.html
    HTH;
    Amy

  • Ive had my 4G ipod touch for about 3 years and i was waiting for one of my games to load and my ipod suddenly turned off and now i cant get it to turn back on. is there a way to fix it or is it just completely shot?

    ive had my 4G ipod touch for about 3 years and today i was waiting for a game to load and my ipod suddenly shut off and i cant get it to turn back on. is there any way to fix it or is it just completely shot?

    See my response to your other post

  • Adding a plug-in to just one audio file?

    Hello,
    I'm really new to Logic Pro and I was curious if there is a way to add a plug-in to just one audio file in a track and not the whole track?  Thanks!

    Or you can press 'A' on your computer's keyboard and where it says 'Volume', click and hold to bring up the automation options. Choose 'Bypass' for that plug -in slot and add four nodes to the line by clicking on it in four places. You can get the plug in to be bypassed until the appropriate place that way.

  • How To Change the Tempo of Just One Track?

    I want to change the tempo of just one track of a song, but when I change the tempo of one track, the tempo of the whole song changes and gets messed up. Does anyone know how to just change the tempo of just one track of the whole song.

    You can not change the tempo of a single track, in GB it's one tempo per song.
    The only workaround would be to change the tempo, export only that track (soloed), and then drop the export back into your project (with it set back to the proper tempo)

  • Anybody that I add to my bbm service doesn't seem to get any request to be added nor do I get one when they add me

    I need some help guys, I have a BB 8320 Vodafone which was from the UK and the person that I took it from unlocked the phone and passed it on to me now. I have a few issues with the BBM service. 
    I have recently activated my BBM service by choosing a particular plan that my carrier offers, and I have noticed that the edge now can be seen in uppercase which means the service has been activated and should work. But, anybody that I add to my bbm service doesn't seem to get any request to be added nor do I get one when they add me. I have been facing this problem with my BBM and I am not sure how to go about it. 
    I need a few clarifications first and foremost, when a BB 8320 phone is unlocked does it mean the phone has been unlocked so other carrier sim cards work or all the feature on the BB 8320 phone unlocked. Secondly, considering i'm in a situation like this, what should I be doing to resolve this issue at the earliest, do I go to a technical desk guy and ask them to re-install the Black Berry OS on to my phone all over again or do I just throw away this piece of **bleep** that BB has created? 
    And could anybody let me know doesn't BB have a universal software that let people put any sim card and work rather than have carrier specific software? Please need help really bad on this one!!
    I would really appreciate if some body can help me out in resolving this issue with your comments.
    Thanks much in advance who ever you may be! 

    It really doesnt work not e en on my bberry8350

  • When importing photo's into Apperture via iPhoto Browser I get 2 Versions of the master import as opposed to just one?

    When importing photo's into Apperture via iPhoto Browser I get 2 Versions of the master as opposed to just one?
    Why is this?
    Are there two master photo's?

    When you import to Aperture using this method you get all the versions that iPhoto has - Mster and Edited  version. If you haven't edited the photo then tow possibilities:
    A: the photo is Raw and you'e gettting the automatic preview that iPhoto creates on import as well
    B: The shot has an auto-rotate tag from the camera
    Regards
    TD

  • HT204053 I want to play newly purchased music but cant, i get the message "You can use iTunes Match on this computer with just one Apple ID every 90 days. (mobileme family pack is the problem i think)

    I purchase a new album on my phone but then cannot download it to my laptop -  I get the message:
    "You can use iTunes Match on this computer with just one Apple ID every 90 days. All I can think is that the problem stems from purchasing a mobileme family & some of the music being my daughters. (she is 9 & I need to be ble to listen to more than Katy Perry & Justin Bieber) Please help! :-(

    Welcome to the Apple Community.
    Youll get that message when you change the iTunes account you are logged into, you can't keep changing it.

  • I have an iTunes account with music. My wife has an iTunes account with apps. How do I get both on our iPad2? Without syncing to just one account?

    I have an iTunes with music and videos. My wife has an iPhone with music and apps. How do I get both on our iPad2?
    Without syncing to just one account?
    We each have our own laptops.

    Hmm.
    Probably easier for me to put all my stuff on my wife's computer I suppose.
    Rebuilding all those iTunes playlists is not very fun though.
    And of course anything new that I want on my laptop I will have to duplicate on her laptop in the future.
    Not sure how iCloud works just yet.
    So you can't have two laptops and manually sync both people's stuff to one iPad?

  • I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again  i keep getting two lots of pics..how can i get just the one set again? thnx

    I downloaded pictures onto my iPhone from computer twice by mistake now when i uncheck/sync then check and sync again  i keep getting two lots of pics..how can i get just the one set again? thnx

    You're welcome.
    All photos transferred from your computer are stored in the iPhone's Photo Library regardless if you select a single album or folder of photos to be transferred or multiple albums or folders. The photos on the albums or folders of photos include a pointer to the original photos stored in the Photo Library. The photos are not duplicated taking up double the storage space. This way you can view the photos in an album or folder of photos only by selecting the album or folder, or all photos in all albums or folders by selecting Photo Library.
    Makes more sense when transferring multiple albums or folders of photos which cannot be changed when transferring only a single album or folder of photos.
    The same applies with iTunes and music playlists. A song can't be in a playlist unless it is in the main iTunes library. Placing a song in a playlist does not duplicate the song.

  • HT201272 I just updated to itunes 10.3 & iOS 6.1 and I cannot download a song to my library! I get the error "This computer is already associated with an Apple ID. You can download past purchases on the computer with just one apple ID every 90 days..." WH

    I just updated to itunes 10.3 & iOS 6.1 and I cannot download a song to my library! I get the error "This computer is already associated with an Apple ID. You can download past purchases on the computer with just one apple ID every 90 days. This computer can be used with a different Apple ID in 75 days." WHAT??
    I've never had problems before - my husband and I have used the same library for years.  My daughter also has her own Apple ID... are we going to have trouble with that, too?  Actually we have 4 Apple IDs - somewhere around 8 Apple devices... this is a huge issue for us... HELP

    Just to be clear - I just bought a new song and can't download it into the library because of this error message.

Maybe you are looking for