I get "Make your printer even smarter" page every few minutes

HP 8100
When the printer is switched  and idle, it prints a "Make your printer even smarter" page every few minute. How do I stop this?

Hi RogerShields,
I was able to help another poster with a similar problem, please take a look at the link below, and let me know if following those steps helped
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/STOP-SCHEDULED-PRINT...
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Similar Messages

  • Why do I have to reload page every few minutes?

    Why do I have to reload page every few minutes?

    What app are you using? 
    Why are you reloading the page?  What is the problem that forces you to reload the page?
    A picture of the page might be helpful.
    How to show us a screen image.  Avoid personal identification.
    command + shift + 3   Will take entire screen.  You hear a click.
    command + shift + 4 Lets you decide what to take.  Mouse pointer changes. Move mouse to upper left corner of desire image.  Hold down left mouse key where to start image.  Drag mouse to lower left of where you want to stop image.  Release mouse.
    You will get a picture n.png file on the desktop.
    On the forum input panel you will see the camera icon.
    click on camera icon.
    another window will appear.
    Make sure you have selected the from your computer tab.
    click on Browse button
    An open file panel appears.  Select the file.
    After selection a file, I have this screen showing.
    You will have to click on Insert Image.  You may have to scroll down to see Insert Image button.

  • Deskjet F4280 - Prints a cartridge Alignment Page every few minutes

    My F4280 has decided to printe cartridge alignment pages every time I turn it on or randomly as it just sits there.  When I put the alignment page and hit resume (as it tells me to do) it goes throught some internal movement, then sits there for awhile, THEN prints out another chartridge alignment page.  Tried reloading software, but problem still them.
    This question was solved.
    View Solution.

    Hello ImJustAvg,
    this should help. When another page comes out of the printer, first disconnect it from the computer and then place the page on the scanner and hit resume. After its done reboot the printer to see if it will still print a page. If it keeps doing it check the quality of the page. there must be black on it and at least 1 color. not counting the color in the picture of the printer.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • How can I automatically reload a page every few minutes?

    I want the page I have up to reload every few minutes - how can I set Safari (or another browser if necessary) to do that?

    Reload Safari page with automator
    Automatic Page Refresh...
    applescript to refresh a web page every...:

  • "hey there do you want to backup your bookmarks " keeps popping up every few minutes it`s really annoying can someone help please?

    It is a grey box popup that stops whatever I am doing,even if a click yes on it,it does it again on another page,it is a persistent problem,any help will be really appreciated
    thank you
    Adrian

    I think I solved it.
    I searched my extensions folder (in my profile) for all image files (PNG and JPG), and found the pop-up images to be in an extension folder related to Firefox Sync (not an external extension, actually). But even though I had already disabled it and un-linked this computer from Firefox Sync, the message still popped-up.
    I think the image filename was SYNC.PNG, or something like that. Close Firefox, find the folder where that image is in, and rename the main folder (the one right under the extensions folder) to some other name (such as "original name_copy"). Then start Firefox. Check if it works OK and if the pop-up ceases to appear. If everything OK, then you can delete that folder.
    If something goes wrong, just rename the folder to what it was before.

  • How to get windows username printed on each page irrespective of application? we have cm6030f.

    How to get windows username printed on each page irrespective of application? we have HP CM6030F.

    Hi,
    Normally, you will receive a Windows Azure Pass from your local Windows Azure team. Please try to contact your local Windows Azure contact (http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
    Also, you could see this page
    http://www.windowsazurepass.com/AzureU/AcademicFAQ and apply the free trial azure via (http://www.windowsazurepass.com/AzureU/).
    Q: I am a student. Can I apply for a pass?                     
    A: Windows Azure Educator Grants are only for valid faculty. If your faculty has been awarded a Windows Azure Educator Grant, you will be able to get a pass through him/her for you coursework. If you are interested in learning more about Windows Azure,
    we encourage you to share these Educator Grants with your faculty or sign up for the FREE 3-month trial offer. 
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When I AirPrint it only does small portions of the page. How do I get it to print the whole page?

    When I AirPrint The printer only prints a portion of the page.  How do I get it to print the whole page.

    It would help if you stated what printer you are using and what application you are doing the printing from. Also, what are you printing?

  • PDF's print two sided.  How can I get them to print on single pages?

    PDF's print two sided.  There is no option shown.  How can I get thelm to print on single pages?

    1: Go into iTunes.
    2: Right click on the song and choose 'Get Info' (or press cmd+i on a Mac).
    3: In 'Info' change the album name to the one you want it to go into, when you start typeing it should automatically come up.
    4: Check that the disk number and track number is correct.  It should be automatic.
    4: Press OK.
    You should see it go into the album now.

  • Keep hp 6700 in good shape: automatic print quality diagnostic page every week?

    Hi all,
    I've recently bought the HP Officejet 6700 Premium, and I'm concerned about keeping it in good condition, since I had to replace my previous canon printer because of a stuck printhead (the photo black one, I didn't used it for a long time).
    Since I don't print much (but I'm using the ADF scanner a lot), and other family members prints sporadically, most of the time in black and white, I would like to setup an the printer to automatically print a diagnostic page every week to make sure everything is alright.
    Using eprint, IFTTT and google calendar I could automatically send a file to print (I already set up the printer to wake up a few minutes before the calendar event) with black and color bars (someone suggest to print the google homepage since it has many colors but uses little ink).
    Is there any chance I can directly print the print quality diagnostic page (so I can fully diagnose a problem if it occurs)?
    Thanks for the attention
    Cheers from Italy!
    This question was solved.
    View Solution.

    Hey,
    To clarify for you and answer your new questions on the printers self maintenance.
    The maintenance cycle occurs randomly. It will occur after any power up, after print jobs(not every one) and any time it "think's" printhead health is poor. As mentioned above the printer to does have to be powered on for this to occur.
    You can if you'd like still print off the odd test page just to check, once a month would be adaquet.
    If you want to be saving power and are turning it off, then you would want it to be at least powering on and running the automated service that occurs weekly.
    I hope this clarifies everything for you. Thanks for your posts.
    I worked on behalf of HP.

  • How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

    How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

    This occurs when the printer is not aligned completely.
    Please follow the steps mention in the link below to resolve the issue:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01336348&cc=us&lc=en&dlc=en&product=428800&tmp_...
    Please mark the post that solves your problem as "Accepted Solution"
    Although I am an HP Employee, ALL of my posts express MY opinion, and not of HP, whatsoever.

  • I keep getting this pop-up every few minutes: "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" I'm sick of it!!! How can I get rid of it???

    Duplicate of [/questions/860865]
    Question
    I keep getting this pop-up every few minutes: "This web page is being redirected to a new location. Would you like to resend the form data you have typed to the new location?" I'm sick of it!!! How can I get rid of it???

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    <br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??

    How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??
    == This happened ==
    Every time Firefox opened

    Firefox can have multiple home pages if you wish. Each home page that will open when starting Firefox is separated by the "|" character.
    See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    To have new tabs open a specific web site, add one of the following extensions:
    http://sogame.awardspace.com/newtaburl/
    https://addons.mozilla.org/en-US/firefox/addon/777

  • When attempting to edit a project in the PWA I receive the error: 'An error occurred while opening your project. Give us a few minutes and try again...' Project Server 2013

    Hello,
    I am hoping someone can assist with the error we are encountering when trying to edit a project from the PWA in Project Server 2013.  I can click on the project name and go to the detail page and I can
    click and see the schedule.  However, if I click on a task in the schedule and attempt to edit it, I receive the following error:
    'An error occurred while opening your project. Give us a few minutes and try again. If this happens again, contact your administrator.'
    At this point I must click cancel twice to get rid of the error pop-up message.  At this point, I am no longer able to look
    at the schedule of the project either.  Can someone assist with this issue?
    Thanks

    Hi antonio,
    In addition to Phani's advice, which version of IE are you using?
    Can you reproduce the issue on another mahcine and with another browser?
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Apple login page poped up every few minutes

    Just upgraded to ios 6. Using a hotel wifi now. Every few minutes, there is an Apple login page poped up saying I have successfully login. How do you stop that page popping up every few minutes. Very annonying! Thanks a lot!

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    <br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Installed 4.0.1.0 yesterday. Since then, I get "not responding" message every few minutes. I've gone back to Explorer!

    Installed 4.0.1.0 yesterday. Since then, I get "not responding" message every few minutes.

    MAil often doesn’t fully quit although it appears closed in dock (I have to force quit)
    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Maybe you are looking for