I get many times in safari( webkit2webprocess.exe has stopped working) why?

How can i solve this problem?

Uninstall Safari and reinstall:
Safari 5.1.7 for Windows - Support - Apple
If this doesn't work, I suggest migrating to a different browser given that: Farewell Windows Safari, as Apple excludes its homegrown browser ...

Similar Messages

  • Continue to get pop up that WebKit2WebProcess.exe has stopped working

    I continue to get a pop up that WebKit2WebProcess.exe has stopped working. How can I fix this?

    You are on pc or mac?  I think pc.   Below is a link that gives the steps, and it suggests you need to down load a controller, and then it tells you how to set it up.  See if this helps any.
    http://www.gottabemobile.com/2011/10/12/icloud-photo-stream-on-windows-pc/
    Within the write up is a link to the apple site where the download is available, for free!

  • How do I get rid of "Apple Photo Streams.exe has stopped working" on Windows 7

    The error message "Apple Photo Stream.exe has stopped working" keeps popping up when I start my PC which has a 64 bit Windows 7 OS. How do I get rid of this?

    I saw that uninstalling  and then reinstalling the iCloud control panel on your computer corrects it.  I did this and it worked for a while but I'm getting it again.  Any ideas??  Thanks!

  • TS3989 i keep getting a message saying that (applephotostreams.exe)has stopped working on my Pc, can someone please tell me how to fix !

    I keep getting a message on my Pc saying (applephotostreams.exe) has stopped working. How do i fix ?

    I responded to your other post, before I noticed this!
    I'm glad it's fixed.

  • WebKit2WebProcess.exe has stopped working

    This is getting tiresome.  Happening on the Safari browser on my PC using Windows Vista.

    To minimize the problem associated with webkit2web.exe, turn off  "RSS" in Preferences.  Click Preferences -> RSS -> don't check "Automatically update articles in" both "bookmarks bar" and "bookmarks menu".

  • TS3989 I get a message on my computer saying "applephotostream.exe has stopped working."  I don't know how to fix it. Help!

    Everytime I get on my computer I get an error message stating " applephotostream.exe has stopped working."  I have tried to repair icloud and have clicked on the check online for a solution and cannot find how to fix this issue.

    This may occur if you are connected to the Internet and iTunes is trying to connect to the iTunes Store and fails for some unknown reason.
    Try this:
    Quit iTunes and disconnect completely from the Internet.
    IF you have an iPhone (iPod etc), open iTunes. Sync the device.
    Re-enable your Internet connection.
    Quit iTunes.
    Open iTunes again.
    If this does not work, try completely uninstalling iTunes, then reinstall it according to these instructions:
    http://www.apple.com/support/iphone/assistant/itunes/#section_6

  • HT1349 I have icloud on my pc with windows vista.  Recently, upon startup I receive an error that says applephotostream.exe has stopped working.  Windows will close this problem . . . any suggestions.  I tried to download the control panel again. no luck

    I have icloud on my pc with windows vista.  recently, upon startup I get a message that says applephotostream.exe has stopped working.  Windows will close this program  . . . I tried re-installing the icloud control panel, etc.  to no avail.  any leads?

    Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

  • Sqldeveloper64W.exe has stopped working

    Problem Summary
    Receive error: sqldeveloper64W.exe has stopped working when attempting to open .sql files
    Problem Description
    Within SQL Developer 4.0, I've gone into Preferences > File Types, found the .sql extension and checked the box that says Open with SQL Developer.  I've gone to the Set Associations control panel in Windows 7 Professional 64 bit and confirmed that the Current Default is set to sqldeveloper64W.  I've used the CMD function to access regedit, deleted the file associations for .sql and set all preferences again.  If SQL developer is not already open on my machine and I attempt to open a .sql file, the application launches fine.  If I try to open additional files from windows explorer or windows search, I get an APPCRASH indicating that sqldeveloper64W.exe has stopped working.  I click close the program and sql developer remains open, but my file has not opened. 
    Error Codes
    sqldeveloper64W.exe has stopped working

    This problem has been plaguing me for ages too, but I think I've finally found the solution from this post:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-files/problems-with-file-association-in-windows-7-64-bit/8a84fcec-22df-4942-8e35-d98dbe96e327
    "In regedit: Navigate to Computer\HKEY_CLASSES_ROOT\Applications and find your .exe name.
    Navigate under its name to shell>open>command. In the Default change its location to the actual location of the executable, hit okay and then try and reassociate the file type as you normally would."
    In my particular case, I browsed to   Computer\HKEY_CLASSES_ROOT\Applications\sqldeveloper64W.exe\shell\Open\Command
    and changed the (Default) value
    from "C:\oracle\sqldeveloper\sqldeveloper-4.0.2.15.21-x64\sqldeveloper\bin\sqldeveloper64W.exe" "%1" %*
    to "C:\oracle\sqldeveloper\sqldeveloper-4.0.2.15.21-x64\sqldeveloper.exe" "%1" %*
    And now the file association works correctly, and now with sql developer already open, I can open another .sql file from windows explorer. Fingers crossed this is finally fixed!
    Keith

  • "Killapps.exe has stopped working and has been closed&qu

    My card was working fine until i tried to update my drivers today. Now, no matter what version driver I attempt to install I get the error message "Killap
    ps.
    exe has stopped working and has been closed." when it begins to install the drivers. I've attempted the beta driver, the latest stable driver, and even installing the drivers off the disk. I even tried using system restore to go back to before I attempted my first update today, only to have system restore fail!? I have an X-Fi Fatalty Champion card, and am running Vista Ultimate 32 bit. Now that this has occured, I'm stuck without sound. Before you even ask, yes, I'm using the disk labled for vista that came with my card. Window's built in sound drivers (which worked when i first plugged in the card before I even installed the software a few months ago), dont even attempt to kick in. Help? Please?!

    I was having the same problem.  Earlier in the week, I was able to drag a few photos to the upload folder and they synced correctly.  Yesteday, I dragged different photos, and I got the "applephotostream.exe has stopped working" error.
    The solution - for me, at least! - was to reduce the size of the pictures being uploaded to the photostream.  While all of the pictures were jpegs, the first set were ca. 800K (3800 x 2500), and the second set were ca. 2.5 MB (4000 x 2000).  When I reduced the resolution of the last set by a factor of 4 (ca. 600 K, 2000 x 1500), they uploaded without a hitch.
    Based on this admittedly sketchy experiment, it looks like Apple has a max picture size limit, apparently based on file size rather than picture resolution).  Perhaps < 1 MB?  To be rigorous, I should complete the experiment - leave the resolution of the second set of pictures alone and reduce file size by reducing jpeg quality. 
    Has anyone heard about a picture file size limit?

  • Sqldeveloper.exe has stopped working

    I get this prompt that says "sqldeveloper.exe has stopped working" when I double click a .sql file using windows 7 explorer. My sqldeveloper application is running already and does stay up and connected to the database server. My two options at this prompt are "close the program" and "check online for a solution". I choose "close the program" but the program does not close. "find a online solution" does nothing. There is no icon associated with .sql files when viewing in explorer. Should there be?
    If I use sqldeveloper to browse to a .sql it will open it. It does know to open .sql files. But I need to also work when browsing for files using windows explorer.
    Anyone have this problem? If so, how did you resolve it?

    Do you have any older installations hanging around? I don't normally open files from windows, but I did the other day and it started up SQL Developer 1.5. I have been using 2.1 and then various pre-releases of 3 up to production since I last used 1.5. It looks like file associations don't get updated.
    It may be you have an old, non-working installation which is what is giving you the problem.

  • Soundbooth.exe has stopped working (on initialization)

    I have a Windows Vista Ultimate 32-bit machine with Intel Core2 Extreme (Q6850) @ 3GHz with 4GB RAM 1TB drive space with 152GB used. [Adobe Creative Suite 3 Master Collection]
    Upon initialization of Adobe Soundbooth I see the splash screen as it loads it's components then all of a sudden I get an error message that "Soundbooth.exe has stopped working", Vista then attempts to find a "solution" and then the program closes. This also is occuring with After Effects & Premier Pro so I'm thinking it may be a codec issue. I've tried reinstalling (repairing) and I've uninstalled it completely then rebooted and installed it again with no success. Unfortunately I'm stuck with Vista, are there any known solutions to this issue?

    Exactly as David says. Vista installs always require Administrator access. If you have turned off UAC, log on to the Administrator account, otherwise choose the method already mentioned. Before attempting this again, use the CS3 Clean Scripts from the support pages. They will delete everything instantly and spare you a lengthy uninstall, plus they will fix the install references on the system, so you will get a clean install.
    Mylenium

  • TS3989 getting this message every time "apple photostream.exe has stopped working", how can I fix it?

    getting this message every time "apple photostream.exe has stopped working", how can I fix it?

    Uninstall and then reinstall the iCloud control panel on your computer.

  • HT201317 Why do I keep getting applePhotoStream.exe has stopped working

    Why di i keep getting applephotostream.exe has stopped working on my PC. I have removed the icloud control panel and reloaded it many times and whilst it cures the problem temporarrily it soon comes back................any permanent cures please!

    The only worked it worked for me was to uninstall icloud, restart my pc and reinstall (download from apple site) icloud.

  • Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

    I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
    Solved!
    Go to Solution.

    Hi - are you getting it at the start of installation, during or after 100% progress has finished?
    Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
    This could be caused by the NVIDIA chipset driver :
    https://decibel.ni.com/content/message/46299?tstar​t=-130
    Thanks
    Sacha
    // it takes almost no time to rate an answer

  • This is the closest community that might solve the followingroblem:  Icloud is supposed to work from a pc.  It works fine from my iphone and ipad but not my pc.  I keep getting the error message: ApplePhotostreams.exe has stopped working.

    Iclouds is supposed to work from my PC but doesn't.  Loaded the program several times.  I have all the corrected software.  I keep getting the error message: ApplePhotoStreams.exe has stopped working.  Anybody out there that uses icloud with a PC???

    I've got the same problem and can't find a solution for this problem...

Maybe you are looking for