I get message iTunesSetup.exe couldn't be downloaded

When I try to reinstall itunes I get the message iTunesSetup.exe couldn't be downloaded. I have windows vista, can anyone help?

I read it between the lines.
tt2

Similar Messages

  • Itunessetup.exe couldn't be downloaded error message for for vista.

    itunessetup.exe couldn't be downloaded error message for for vista. Couldn't get the update so I uninstalled itunes and still get the error message. I tried reconfiguring the start up components with no luck. anybody know how to fix this?

    I actually had started on this before your post but you are right. My luck created some issues but after I got around that it worked. I uninstalled everything in the order it needed to. While I was doing this windows had an update. When I restarted something must have went wrong with the update and it crashed on the start up. took me a while to restore it but when I was done it brought back the programs in their damaged state.
    So I did the uninstall process again. restarted. and reinstalled and it all works now.
    Thank you for the help.
    For those reading this the order to uninstall goes as:
    iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support, iCloud, and finally MobileMe. Skip over any you don't have installed. Then Restart then reinstall itunes.

  • Please help am trying to download new version of itunes and have remov ed all apple files. Now when I try to download I get itunes setup.exe couldn't be downloaded?

    Please help as I am trying to reload new version of Itunes. I have followed all advice I could find in removing apple files and itune files etc...Now when I try to download it asks me if i want to save itunes setup_exe and when i select that option I get a message that says could not be downloaded. Any help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on anoterh computer to help determine if you have an iPod or computer problem.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • 610_b034_multilanguage.exe couldn't be downloaded

    I have been trying to download Blackberry Software to my pc & keep getting this message: 610_b034_multilanguage.exe couldn't be downloaded.
    Can anyone help?
    My phone is a Storm 9530. My carrier is Verizon Wireless v4.7.0.148

    I actually had started on this before your post but you are right. My luck created some issues but after I got around that it worked. I uninstalled everything in the order it needed to. While I was doing this windows had an update. When I restarted something must have went wrong with the update and it crashed on the start up. took me a while to restore it but when I was done it brought back the programs in their damaged state.
    So I did the uninstall process again. restarted. and reinstalled and it all works now.
    Thank you for the help.
    For those reading this the order to uninstall goes as:
    iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support, iCloud, and finally MobileMe. Skip over any you don't have installed. Then Restart then reinstall itunes.

  • HT3275 I get message Time Machine couldn't complete the backup to MybookLive The backup disk image Volumes/TimeMachine RobertFurlong's Computer(2).sparsebundle is already in use.Any ideas?.

    I get message Time Machine couldn't complete the backup to MybookLive The backup disk image Volumes/TimeMachine RobertFurlong's Computer(2).sparsebundle is already in use.Any ideas?.

    I have experienced the same problem on a MB Pro 2011 and a 2013 MBAir both with updated OS's. OSX10.9.3.  WD MYBookLIVE 3Tbyte.   I have found the only solution is to reboot the WD device thru Western Digital's software that you can access via the IP address for the WD device. For example, if you type the WD backup device's IP,  like ... "125.261.1.38 " in the Safari address bar, WD has built-in software the runs a program that allows you access to the WD unit to maintain it, turn it off, reboot it, partition it, etc.
    Doing this, I believe disconnects or ?dismounts? the WD from TM and resets everything.  It works most times, not always, Sometimes you need to reboot the Mac too.
    I'm more interested in what is causing this frequent failure on the WD.  It happens to me several times per week. I suspect, network failures or improper disconnections between WD and the Mac (not caused but the user) are the culprit but I haven't seen any blogs on a permanent fix. Spent hours on the phone with WD techs; they were clueless. I found the "fix" myself.
    Further, I often get an associated reply to "dismount the WD" with the "sparse bundle.XXX is in use" error. But when I go to Finder or Disk Management to find out what's mounted on the Mac, the WD is never mounted, even when the TM backup is working properly.  I find the WD device under SHARED in Finder. Its never mounted, so I can't dismount it.

  • I can no longer create a PDF.  The response is Acro.Rd32.exe couldn't be downloaded.

    For some reason I can no longer create a PDF.  When I try to download the Reader, the response is Acro.Rd32.exe couldn't be downloaded.  I feel like I have tried everything!

    Please try to use Web UI for now(login at https://cloud.acrobat.com with your Adobe ID and password) to use our service.
    Please give me more information about your system that you are trying to install Adobe Reader.
    1. Have you installed Adobe Reader before?
    2. What OS you have
    3. What anti-virus application you have installed
    4. Did you see any other error messages?
    5. Have you tried to download Adobe Reader XI from www.adobe.com?
    Thank you.
    Hisami

  • "CreativeCloudSet-Up.exe couldn't be downloaded."

    I have a brand new laptop and I'm getting this error when I try and download my first app ""CreativeCloudSet-Up.exe couldn't be downloaded." I'm running windows 8 and using IE 10.
    Ideas?
    Thanks

    Hi SailmanDouglas,
    Are you on a managed network. If yes, then try connecting to some alternate network source and try installing again.
    Refer the kb: http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information.
    Regards,
    Romit Sinha

  • I get message on my IPAD, "Safari cannot download FOXFIRE.". Help!

    Simple. How do I download FIREFOX on to my IPAD? I have preloaded SAFARI. I get message that I cannot download the free FIREFOX browser using SAFARI. What shall I do?

    Hey Cadburycircle,
    Unfortunately there is no true version of Firefox for IOS devices. They do have a very slick app called Firefox Home that is available in the iTunes store. It works similar to Firefox Sync and allows you to see all the open tabs and bookmarks on your computer. You should take a look at [[What is Firefox Home]] for more information.
    Hopefully this helps!

  • Rented movie 3 weeks ago. Trying to watch, I get message: "Error occurred while trying to download this content. Try again later."

    What is wrong? Rented a movie 3 weeks ago. Trying to watch it now, I get message: "Error occurred while loading this content. Try again later."
    Apple TV software is up to date. I can stream music from my computer and also from the Apple music site (whatever it is called). Just get the error on the movie.  Help!
    OS Mavericks 10.9.4 on 2010 MacPro.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • I download Firefox then get this message: Firefox allow the "firefox Setup 19.0.2.exe couldn't be downloaded

    I'm running Windows Vista Service Pack 2 and Internet Explorer 9. Firefox downloads then stops with the message above. How can I resolve this. I really want to use Firefox

    Tyler: It wasn't just Firefox but also other .exe files that I couldn't download in IE9. Not sure what happened, I used to be able to do this but some update must have killed this. I've had some weird problems for the past 3 days.
    I just bypassed IE9 by using Google Chrome that I had installed. This ran the Firefox download and install with no problems. So I'm set.
    I don't know what happened to my IE9 but I think I'll stick with Firefox for now.
    Thank you

  • I cannot update my MBA. Get message he operation couldn't be completed. (NSURLErrorDomain error -1100.)

    I cannot update my MBA.
    Get this mesage: "thhe operation couldn’t be completed. (NSURLErrorDomain error -1100.)"
    Advice please

    See this thread.
    https://discussions.apple.com/thread/4291260?tstart=0

  • After LV 5.1 install, get message, "nimax.exe-entry point not found."

    Just installed LV 5.1 on customers PC. She already has LV 6.1, and 7.1 installed. Upon reboot, at login screen, the error message below occurs:
    "nimax.exe-entry point not found"
    "The procedure entry point?GetVirtualChannelObjectOnServer@CNIConfigData@@QAEKPBD0@Z could not be located in the dynamic link library nidaqcfg.dll."
    I have tried installing the latest version of MAX. No luck. Any help would be appreciated.
    Mark
    Attachments:
    Ann's.doc ‏30 KB

    Hi Marxs,
    My first suggestion would be to avoid installing LabVIEW 5.1 if possible. This for a few reasons...
    LabVIEW 5.1 has the option to install DAQ with LabVIEW. If you elected to install NI-DAQ with the LV 5.1 install, you will run into driver conflict problems.
    If you want to use DAQms with LabVIEW 7.1, you will need to install NI-DAQ 7.1, 7.2 or 7.3. You can also use NI-DAQ 7.3 with LabVIEW 6.1. However, NI-DAQ 7.3 will NOT install support for LabVIEW 5.1. This means that you will not be able to use your DAQ devices in LV 5.1.
    If you need DAQ for LV 5.1, you will need to go back to NI-DAQ 6.9.3. This version will work with 5.1 and 6.1, but you will loose functionality in LabVIEW 7.1.
    My suggestions would be as follows:
    -- uninstall LabVIEW 5.1 and all versions of DAQ that are on the machine
    -- re-install LabVIEW 5.1 but choose the "custom" and elect NOT to install DAQ
    -- Install NI-DAQ 7.3 and have support for 7.1 and 6.1 (no support for 5.1 is available)
    Basically, when you try to mix these very old versions of LabVIEW and DAQ with the newer stuff you will run into driver conflicts that can be unpredictable.

  • I am getting message iTunes.exe - Entry Point not found

    I have search for the QTCF.dll file and I can only fine it in: C:\Program Files\QuickTime\QTSystem
    Do I need to remove this file for it to work?

    What's the precise text of your "entry point" message please, olivia? (That mitght give us additional clues as to what's going on, with any luck.)

  • Want to update Skype on my Iphone, keep getting message saying:must use Itunes to download because item is over 20MB. How do I do THIS?

    I simply want to update the Skype app on my Iphone, but keep getting a message that says: must use itunes to download because item is 20MB. Help. Mack

    Go to iTunes on your mac/pc and click on apps in your library.
    Click check for updates at the bottom.
    Selcet and start the skype update.
    After this sync your newer version of skype to your iPhone

  • ITunesSetup.exe not a Win32 App??

    I have downloaded the latest version of iTunes but when I try to run the installer I get this message: "iTunesSetup.exe is not a valid Win32 Application" I cant run my new iPod on my old version and am frustrated!
    Dell   Windows XP  

    I have the same problem. I wish someone knew the answer!
    I have downloaded the latest version of iTunes but
    when I try to run the installer I get this message:
    "iTunesSetup.exe is not a valid Win32 Application"
    I cant run my new iPod on my old version and am
    frustrated!
    Dell  
    Windows XP  

Maybe you are looking for