I get message saying install success; but it doesn't work. Why?

Use the Settings app to select your Wi-Fi network.
Settings > Wi-Fi > Select the Wi-Fi Network that will not work > then select Forget this Network
After to accept this choice your iPad should see your network again and allow you to enter the new password.

Similar Messages

I just purchased the latest iPhoto to update my 7.1.5.I have run the Library upgrade tool 2x, each saying installed successfully.But, each time I try to open iPhoto, I get the msg,"To open this version of iPhoto,the library needs to be prepared"OSX 10.9.3

I just purchased the latest iPhoto to update my 7.1.5.I have run the Library upgrade tool 2x, each saying installed successfully.But, each time I try to open iPhoto, I get the msg,"To open this version of iPhoto,the library needs to be prepared"OSX 10.9.3

each saying installed successfully
It looks like you installed the Library Upgrader, but did not run it. It is installed in "Applications > Utilities". Launch this tool and click the "Choose Library" button to direct it to your iPhoto library.

I push the cloud botton on the appstore to return the past purchased apps but it doesn't work.why?

i push the cloud botton on the appstore to return the past purchased apps but it doesn't work.why?

Oh gosh, this is ancient history for me.
First, I remember some sort of third party boot enabler being required to install OSX on some G3s. Not sure if it included iBook. http://eshop.macsales.com/OSXCenter/XPostFacto/Framework.cfm?page=XPostFacto.htm l
Second, which exact set of installer discs? They have to be black colored retail discs, not grey ones which came with a specific model Mac and will only boot that model.
What are the exact specifications of the computer? Does it have sufficient RAM? You're asking a lot for a G3 to run Tiger.

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Flash 10.1 for OS X says "install successful" but doesn't work

I've tried on numerous occasions to download Flash Player 10.1 for OS X 10.4.11 but even though I get the "download successful" and "install successful" notifications, when I try to access a flash site it prompts me to install flash player. If I search for Flash Player I cannot see it in any of the applications or utilities. Please help!! Thanks

HI,
Try uninstalling the current copy of Flash then reinstalling then repair permissions.
Uninstall Flash
Install the most recent version of Flash here.
Adobe advises repairing permissions when troubleshooting Flash.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Your Flash plugins are located in /Library/Internet Plug-Ins. You can get information about the plug-in by control clicking the file then click: Get Info
Carolyn

ITunes says installed successfully, but is not on my computer.

I just purchased a new iPod and I have a Windows 7 computer. It says it installed successfully and asks me if I want a desktop icon. I click, "yes," then "finish." I looked on my desktop, in the program folders, and in the C drive folders where it says it installed, but it is not there. Can anyone help with this problem?
Thank you!
M.

Download the apropriate version here:
iTunes 11.1.1 for Windows (32-bit) - Support - Apple
iTunes 11.1.1 for Windows (64-bit) - Support - Apple
Click Save instead of Run. Then manually execute the file when it finishes downloading

Installed Flash and it said it was successful but it doesn't work?

I installed the Flash Player and it said it was successful, but when i went to use it the page that says "you need flash to view this content" came up. So, i uninstalled the program and reinstalled it, but the same thing happened. Then I checked the preferences on safari and made sure javascript and plugins were enabled (I tried to enable java too but i couldnt find it on the preference menu). This didnt help and it still gave me the same message. Then, i went to the adobe website and they had a button that checked to see if flash was installed on your computer and when I clicked it, it said i didnt, but it was installed. I have tried pretty much everything and have read all the forums and nothing seems to be working.
The computer I have is a MacBook pro, version 10.9 and safari is version 7.
Thank you

I am suddenly experiencing incredibly bizarre Flash Player 12 problems in Windows 7 64-bit in both the Firefox 27 and IE browsers. Unfortunately, I can't seem to find a way to post the appropriate details here in a new forum topic in order to get the help I need.
Thanks for your assistance!

Restore apple TV via iTunes - says successful but still doesn't work

I have tried to restore apple TV three times via iTunes. It says successful but the light keeps flashing and the issue remains when i plug back into the TV saying to connect to iTunes. How do I resolve?

Welcome to the Apple community Stacey.
Are you able to test the Apple TV with another TV or in another location.

TS1398 Changed pw in my home network. Now when try to connect, I get message "unable to connect"' but It doesn't ask for new password. So ii'm dead in the water. How do I connect.?

Changed PW in my home network. Now when I try to log on I get "unable to connect" , but it doesn't ask for he new (or any) password, so I'm dead in the water. Any suggestions?

Use the Settings app to select your Wi-Fi network.
Settings > Wi-Fi > Select the Wi-Fi Network that will not work > then select Forget this Network
After to accept this choice your iPad should see your network again and allow you to enter the new password.

Months ago I switched from "MobileMe" to "iCloud." I continue to get messages saying "Move to iCloud." Does anyone know why this happens? Does anyone know how to stop this?

Months ago I switched from "MobileMe" to "iCloud." I continue to get messages telling me to switch to iCloud. Why? How do I fix this?

Get messages where? Have you signed out in System Preferences>MobileMe? - if you haven't, you should first go to the iDisk pane and stop iDisk sycing if it's running, then go to the Sync pane and stop any syncing, then go to Account and sign out.
if you still get problems, go to (user)/Library/Preferences/ByHost and delete all .plist files beginning with com.apple.DotMac and com.apple.idisk, then reboot.

After a mac update; flash player asked to be installed. Install successful but application will not work.

Hello,
After a Mac update, flash player (along with silverlight) asked to be installed when I tried to watch video content or play games. I installed flash player and it reports being successful and appears in my applications. However, I cannot watch videos or play games, every time I am asked to install flash player again and again and again. I suspect this has something to do with plugins but I am not sure. I have un-installed the program and reinstalled but it still will not work. I check my security settings and it does allow plugins. I erased my temporary internet files. I don't know what else to do. Any help would be appreciated! This is incredibly frustrating. Thank you

Thank you for responding! I am using a macbook pro 2011, 2.2ghz, intel
core i7, 16gb - version 10.9.5. I have not intentionally installed any ad
blocking software; intact I am inundated with it most times. My online
school work required that I disable pop up blockers and all was well until
an update a few weeks ago for both security and operating system. To the
best of my knowledge I am allowing pop ups and plugins but this may be
where the trouble is. I am unsure, honestly of what security is running
besides what I find in the system preference/security tab. Thank you again
for responding and any help is most appreciated.
Holly Norman
On Wed, Apr 1, 2015 at 5:47 PM, Jeromie Clark <[email protected]>

Flash installs successfully but still doesn't work

I'm getting very agitated at my cpu. I go to a site that
requires flash. I'm directed to adobe to install it. Installation
is successful...always. I have tried closing my browser and
reopening and it still says I need to install flash to view that
site. I can go back to Adobe, install it again, reboot my cpu and
it still tells me the same thing. I have done all of the
troubleshooting tips and nothing helps. The only thing I can think
is that I have the latest version of Windows Internet Explorer 7
installed and maybe Flash isn't synced with it yet. Is there anyone
else out there with this type of problem?

I found another forum that seems to have a solution.
http://forums.cnet.com/5208-6620_102-0.html?forumID=14&threadID=213694&start=15
These guys have Firefox installed and manually moved the
plugin and then click on it to run it for IE7. I wasn't quite ready
to install Firefox to get IE working... unless that's Mr. Gate's
suggestion. In any case, it's worth reading. Basically, IE7 with
Flash 8 or 9 can be problematic.

I have uninstalled and reinstalled flash player successfully, but it doesn't work

After being told that I didn't have flash player since the recent update, I have tried many times to successfully update. Even after I was able to successfully update, after restarting my computer I am still told that I do not have flash player installed. HELP!

PDuroni wrote:
Windows 7, Internet Explorer 11. Is this not a common thing?
With WIndows 8? Epidemic.
With WIndows 7? Not so common, but I'm seeing more and more of it.
Here's the trouble: "User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess thay've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Flash Player seems to install fine but still doesn't work

I am having the same problem with Firefox 3.6.13 as well as IE 8.0
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
I hope someone can help me.
Steve

Well, is there any Adobe programs you don't have? LOL, maybe I should have asked that:-) Thanks for the info. It is revealing and curious as well.
You have the Adobe Flash Player plugin (non-IE browsers-FF), but not the Shockwave Flash Control in your browser plugins.
You don't have the Adobe Flash Player ActiveX in Add/Remove, but you DO have the Shockwave Flash Object Control in your IE browser. Hmmmm How or why that happened, I don't know. Some glitch when Uninstalling/Installing FP, I would guess.
I see the Adobe download Manager as well (DLM) and can see that you would need that for certain Adobe programs. Since Flash Player is a browser plugin(ActiveX for IE and Plugins for the non-IE browsers) and the download is under 3MB it is better not to use it. However, I am more interested in the addons that the DLM used for FP Installs.
Go to Tools, Manage addons and look under "Show"(light text) in all categories and see if you have a getplus, get_atlcom Class or a DLM Control listed. Look in the Toolbar & Extensions also.
Do the same with FF, plugins, addons and extensions.
On the FlashPlayerTrust, go back to your Flash files, right click on it and open and see what files are listed.
Let me know on the above and did I ask you what Anti-Virus you use? If not, let me know that also.
Thanks,
eidnolb

I have a iBook G3 and I'm trying to install OS X 10.4 but it doesn't work, why?

I recieved my OS X 10.4.1 install discs today so I put disc into my iBook and rebooted it. As I did the apple logo appeared after the bong, no loading wheel appeared then a load of writing appeared. The last line said: "panic: We are hanging here...". At the top I noticed two error lines and they read: "Error: Extension archive doesn't contain software for this computer's CPU type." and
"Error: Couldn't unpack multi-extension archive.". What does all of this mean and how do i fix it? If anyone needs more parts of the writing on the black screen I am willing to give it to you. Thanks

Oh gosh, this is ancient history for me.
First, I remember some sort of third party boot enabler being required to install OSX on some G3s. Not sure if it included iBook. http://eshop.macsales.com/OSXCenter/XPostFacto/Framework.cfm?page=XPostFacto.htm l
Second, which exact set of installer discs? They have to be black colored retail discs, not grey ones which came with a specific model Mac and will only boot that model.
What are the exact specifications of the computer? Does it have sufficient RAM? You're asking a lot for a G3 to run Tiger.

I get message saying install success; but it doesn't work. Why?

Similar Messages

Maybe you are looking for