I get multiple instances of Firefox that open and will not close automatically. What is causing this?

Sometimes I will click on Firefox and it does not open. If I go into task manager it shows that it is running but the program is not active on my desktop. Today I shut down 9 instances that did not automatically close.

Sometimes I will click on Firefox and it does not open. If I go into task manager it shows that it is running but the program is not active on my desktop. Today I shut down 9 instances that did not automatically close.

Similar Messages

  • Firefox incompletely open and will not close

    Firefox will not open. Message says the program is damaged. But when I try to delete the Firefox aps the message tells me I cannot delete it because it is open. Nothing, however, appears on my screen. Firefox is both open and invisible. I cannot completely open it nor can I completely close it.
    == This happened ==
    Every time Firefox opened
    == two weeks ago ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_4_11; en) AppleWebKit/525.27.1 (KHTML, like Gecko) Version/3.2.1 Safari/525.27.1

    Which security software (firewall) do you have?
    Did you check the Firefox rules and make sure that is doesn't block Firefox?
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Firefox often freezes and will not close; also cannot open bookmarks

    After operating normally for a few minutes firefox freezes and will not allow me to open legitimate pop-ups or access another website.
    At the same time my bookmarks folder will not open.

    Which security software (firewall) do you have?
    Did you check the Firefox rules and make sure that is doesn't block Firefox?
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Firefox is frozen and will not close but I want to un-install it. HELP!

    Firefox was open and an error message. Unresponsive script running, continue or stop script? All options were frozen I was not able and still not able to close firefox or any tabs from it, it has been frozen for two days. Is there an easy command line to just close the application?

    You can close Firefox through the Terminal if it refuses to close through Firefox > Quit<br>
    You can open the Terminal by searching for it on the Spotlight (top right corner, magifying glass)
    Once open, you can run this command to kill the Firefox process:
    *kill -9 $(ps -x | grep firefox)
    I'm not a Mac user but that command works for me in Ubuntu.
    To figure out what's causing the unresponsiveness, you can try to start Firefox in Safe Mode. To start Firefox in Safe Mode, just do the following:
    *Clikc the Help menu on the menu bar and select Restart with Add-ons disabled.
    *Click Start in Safe Mode to the dialogue box that comes up.
    Safe Mode disables the following:
    *Extensions
    *Default theme is used
    *userChrome.css and userContent.css files are ignored
    *default toolbar is used
    *Hardware acceleration is disabled.

  • Notification Center open and will not close and......

    My desktop that I installed Win 10 Tech Preview on one day had the Notification Center open down at the bottom right and when clicked on it show "otifications" no new notifications .... my antivirus Software McAfee LifeSafe no longer will work
    and when I do a search for anything.. all the letters and words are either jumbled or missing letters as in the "otification" center.

    Since Windows 10 Technical Preview is just a "beta" version, there are certain amount of compatibility issues when it comes to 3rd party programs.
    Heck, we can't even play DVD in Windows Media Player, and Windows Media Player is a MS product.
    Avast, as I understand it, is not compatible either.
    Perhaps McAfee is facing the same issue. You might want to ask the people in McAfee support forum about the compatibility matter.
    I have a laptop running Win 10 build 9860 as the only OS in the system.
    I am using the build-in Windows Defender as "real time" protection, and Malwarebytes  (free edition) as "on demand" protection. So far, I have no security issue.
    As to letters and text garbled or missing, you need update KB3008956
    installed.
    Go to your Windows Update > click Check for updates >find and install that update.

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?

    I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • I purchased a movie through iTunes and the movie gets stuck on the opening screen and will not play.  Has anybody had this happen?  And if so is there any solution?

    I purchased a movie through iTunes and the movie gets stuck on the opening screen and will not play.  Has anybody had this happen?  And if so is there any solution?

    Hey Christian,
    I'd follow the troubleshooting steps below, from this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    See if that resolves the issue and gets your video playing again.
    All the best,
    David

  • After trying to down ios 7, iPad will not charge, will not open and will not connect to itunes.  The only display I will get is the apple logo, or low battery warning.

    After trying to download ios 7, iPad will not charge, will not open and will not connect to itunes.  Sometimes, screen will switch from Apple logo to low battery notification, but doesn't look as if battery is charging.

    Connect with cable to computer.   Your ipad is in recovery mode.
    Follow directions to fix
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • Ever since the most recent firefox update, every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it?

    Every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it? When I restart firefox, then the download continues and all is well until I try to download something new (which I do quite often).

    You may well find this article of interest and help in sorting out your problems: [[Installing a previous version of Firefox]] The article does contain a link for previous versions, but also points out other troubleshooting advice that may be more appropriate in some instances.
    Another useful article is [[Basic Troubleshooting]]
    I hope you sort out your problems either by downgrading or finding the cause of the problem.

  • Adobe application manager keeps opening and will not allow me to install creative cloud

    Adobe application manager keeps opening and will not allow me to install creative cloud. I am trying to sync fonts and the install is not working. The adobe application manager will open on its own and not allow the creative cloud app to install. I do have other creative cloud products installed however the creative cloud installer icon is not appearing in my toolbar nor does creative cloud show up as an app. I get an error message that I must have creative cloud installed when I try to sync fonts via the type kit to photoshop.

    Hello ducky,
    as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool.
    Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
    I quote: ... helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
    Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html  and follow the prescribed sequence of operations
    Sometimes the "opm.db file" is the culprit. In this case you should delete it.
    If necessary and for further questions and if "open" please use chat, I had the best experiences.
    Hans-Günter

  • My mail will not open and will not let me quit it. Help?

    My mail will not open and will not let me quit it. Ive tried to restart my computer but it wont let me do that because it says the Mail has canceled the restart. It does the same thing when I try to shut it down. Can someone help?

    Welcome to Apple Support Communities
    Press Alt, Command and Esc keys, select Mail and force close it. Finally, restart or turn off your computer

  • My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work.  Once another app is opened, it will not close either.  Now none of the apps are responding. Any ideas?

    My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work.  Once another app is opened, it will not close either.  Now none of the apps on the dock are responding. I asked him to click on the apple, and drop down to "About this Mac", but that wouldn't open either. Any ideas?  If I was at his house, I would call Apple Care in a heartbeat, but am home with my sick daughter,,,  Thanks!

    For starters, have him open Disk Utility in Applications>Utilities, select the volume (the indented listing) and Verify Disk. If it reports any problems, have him try a Safe Boot by holding the Shift key at startup. This boot will take much longer than usual. It's checking and trying to repair the drive directory, if possible. Once in Safe Boot, have him repair Permissions.
    For other Disk repair remedies see
    http://support.apple.com/kb/TS1417
    Also, have him try a PRAM Reset. At the startup chime, hold down CMD-Option-P-R together, listen for two more chimes, total three, then let go to finish booting.
    Also, is he running any AV? If so, have him uninstall it. It might be responsible for this behavior. (There are no viruses for OS X.)

  • Excel opens and does not close when using the OI classes for some users...

    Hello Experts,
    I am using the OI classes(i_oi_container_control, i_oi_error, i_oi_document_proxy, i_oi_spreadsheet) to transfer Excel data to my itab. The problem we are encountering is that for some users the excel automatically opens and does not close. But in my case it is not opening so it is fine in my case. In my code I am already using the 'CLOSE_DOCUMENT' and 'RELEASE_DOCUMENT'.

    Viraylab,
    Check by any case you set the parameter register_on_close_event of the method init_control? Dont set the parameter as it will look for the corressponding custom code in your program. Also try with the method release_all_documents.
    Regards,
    Kiran Bobbala

  • I can not type while voice support open and can not enter code what to do??, I can not type while voice support open and can not enter code what to do?

    I can not type while voice support open and can not enter code what to do??, I can not type while voice support open and can not enter code what to do?

    Is that VoiceOver? If so, follow the directions here:
    http://support.apple.com/kb/ht3577

Maybe you are looking for

  • Lost all photos and albums in iPhoto version 9.4.3

    Hi all, I'm currently using iPhoto version 9.4.3. Didn't do anything out of the norm but lost all my imported photos from my iPhone that I've painstakingly put into albums. Only thing I did differently was shutting down my laptop cos I was catching a

  • Best practice regarding automatic IU documents

    Hi Team, In case of automatic postings at IU elimination how to configure document type in order to allow different subassignments like segments. This sub assignments field in case of automatic posting documents allowing at header level and at the ti

  • No "Refresh Music Library" Option In N85

    Hello All, I Bought An N85 Yesterday With The Firmware Version Of 11 something, Now The Thing Is That I Updated The Firmware Via PC to 20.175 And Now In The Music Player Menu, I Can't Find The Option Refresh Or Refresh Music Library...I Am Like **ble

  • Task Scheduler wont run when set to "Run whether user is logged on or not"

    Hi I have two 2008 R2 servers with the same task and pretty much the same powershell script the schedule is running.  The powershell just runs a daily snapshot of the server.  One server it runs fine with  "Run whether user is logged on or not" selec

  • Web page development

    I have a question on the footer of a web page. Do  you use <META http-equiv="<script type='text/javascript'>" content="type"> </HEAD> Before HTML5 I lot of my audience uses old equipment and browsers. Would I also include the <Footer> element assumin