I get one bright white flash in iDVD

After I import a Quicktime movie into iDVD and then play it, I get one very short white bright flash in the beginning of the movie.
How do I get rid of this flash?

You might try removing the first frame or two from the beginning of the QT movie and add it again to the iDVD project. Be sure to remove the movie from the project before editing it.
OT

Similar Messages

Oracle forms display bright white flash when transitioning between forms.

We recently migrated an application from Oracle Application Server to WebLogic and we are noticing that in the WebLogic environment while transitioning between forms there is a quick bright white flash that has caused several complaints. We are not sure if this is related to a performance issue which may be preventing the form from painting quick enough or if there is a configuration problem somewhere. Has anyone else seen this behavior?
We are running WebLogic Server Version 10.3, Fusion Middleware 11gR1, and Oracle DB 11.2

Unfortunately we don't have any errors to work off of. The application works fine, it's just that their is a very short delay when transitioning from one form to another and during that transition the whole form turns bright white which has caused users to complain that it could cause an epileptic seizure. I assumed maybe there was some performance tuning/caching that could be done to make it so it loaded quicker. Our DBA team recieved a response from Oracle support stating that although the forms themselves are relatively unchanged, due to the underlying software changes in 11g we are to expect some differences compared to previous versions. We have since set background in formsweb.cfg to use a light grey image which seems to be more acceptable for our users.
Edited by: user4597705 on Oct 12, 2012 1:18 PM

White flash during iDVD transitions?

Whenever I apply a transition to a button (play movie, select chapter, etc.), I get a short, white flash before the next video plays. Doesn't seem to matter what type of transition I apply (fade to black, push, etc.).
How can I alleviate this issue?
Many thanks.
Jeff

Thanks Sue... not sure that's it as I don't think I'm working with a slide show. I simply choose a theme to start... import a video (or two, etc.)... then select a transition for the button. If the transition takes me to the start of the movie (be it dissolve, fade to black, etc.), there is a momentary white flash, then the movie starts. Kinda annoying. I'll read up on the slide shows.

White flashes in iDVD

I made a huge iMovie in HD--1:25 in length. When I first sent it to iDVD, the audio sync was off near the end. I was able to fix that, but now when I preview it in iDVD there are two places where the screen goes white for a second. When I check my iMovie, the white flashes are not there! The white flashes are not at transitions or chapter markers, but after a title put over a clip. I sent the iMovie to iDVD by dragging it. Anybody else experience this and have an explanation?

Sometimes the Preview function in iDVD doesn't work exactly right. Try Saving as a Disc Image from iDVD and then use Apple's DVD Player to see if the video functions correctly. "Save as Disc Image" creates a virtual DVD on your desktop that you can Copy to a physical disc using Roxio Toast or Apple's Disk Utility.
John

White flash between FLVs

Hello!
I am creating a virtual tour of an office with multiple video
segments. I want to let the user make choices after each segement.
I can choose the different flvs to play but I get a sudden white
flash as I start the next video. Any suggestions how to eliminate
that?
thanks,
rich!

That is far too simple a solution, if only it was true. (It would also suggest that my eyesight is not up too much)
I've had this problem repeatedly, and even overlapping the video clips by a considerable distance doesn't always yield a positive result.
http://www.aircontrolindustries.com/flash_problem.jpg
The two clips are one after another in the same layer, no space, and no, the video clips don't begin/end with a white frame.
*Important* When I let the movie play in Flash, there is no gap, it's only after exporting. And after exporting is a gap before the clip (even though it starts in frame 1) and between the clips, and it is showing what the background colour is set to.
J

IPhone frozen/no brightness/white screen

So yesterday it start with my iphone telling me that I needed to connect to iTunes and restore because I couldn't make or receive calls. I reset it, and seemed OK. I later tried to play doodle jump, which crashed upon opening, so I reinstalled it to no avail. I discovered this morning that wasn't just doodle jump, but all 3rd party apps. It also went through stages of not turning on, telling me to restore it, and still having an image on the screen but there was absolutely no brightness to it, and instead of the screen going black when I press the sleep button on top, I would get a bright white screen. Giving up on resets, I came home from school and restored it, and it worked perfectly. Now it's 5.5 hours later and it just froze, unfroze, and had no brightness. I reset it, and now it wont turn on.
Any suggestions? Thanks

HPGuelpher, welcome to the forum.
When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Depending on the age of the computer, you could have a failed power supply unit (PSU). Here is a guide to help you troubleshoot the problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Black/white flash at end of iDVD transition

Why am I getting a black (or white) flash consistently after a transition from iDVD menu to movie?

One thought. Take a look at your timeline in your original imovie project. If your audio comes first without any video attached to it, that can cause the flash. If that's not the case, try shaving one or two frames off your video, then reimport your project into idvd. That might take care of it. Good luck. And let us know how it turns out.

X6 - I need a Flash Player, how do I get one pleas...

I am new to using a phone to browse the web. I have recently bought an X6. When I go to some websites I am told I need a Flash Player. How do I get one, will it work on all websites, and are some better than others?

Hi,
This message usually refers to your notebooks main battery.
Download and run the stand-alone battery test utility available on the page below and see if this reports any problems with your battery.
http://h20239.www2.hp.com/techcenter/battery/battery_ts.htm
If your notebook is still under warranty, contact HP to get this replaced.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty, you can order a new battery starting on the link below.
http://h20141.www2.hp.com/hpparts/?cc=US&lang=EN&jumpid=hpr_r1002_usen
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have a mac pro, and today i turned it on and all i get is the white power light come s on and starts flashing, my computer does not boot up can anybody help?

why doesn t my mac pro boot up, i turned it on today and all i get is the white power light on the front of the computer starts flashing, does any body know about this problem?

Which model of Mac Pro do you own?
Check Crucial.com for their opinion, but there are cheaper ways to go.

A 3cm wide, bright white vertical line has appeared o my screen. I can't get it off.

A 3cm wide, bright white vertcal line has appeared on my screen and I can't get it off.

Hello:
I suggest you take it in for diagnosis/service. The problem would appear to be hardware.
Barry

Using embedded SWF, get a white flash when its to play

Hi,
We develop e-Learning content using swf files embedded in
DCRs. We have started noticing a problem with the new Shockwave
player 10.1+ in that there is a noticable flicker or white flash
before the swf plays or is told to move on.
Has anyone had a similar problem? Does anyone know a
solution?
We are using Director 8.5 and Flash 8.0. files published for
Flash Player 5.0.
Simon

Well dont all fall over each other trying to post a possible
solution ;-).
Seems that we found the problem. We use shared script
libraries (cst & cct). It appears that there is a line in our
lingo code that sets the flash sprite cast member automatically
direct to stage. Shockwave player 10.1 + does not seem to like this
on standard speed machines and causes a flickering border around
the flash animations, which is really noticable. The line of code
reads as so:
sprite(channelNo).directToStage = true
We simply commented this out and the page functions fine.
Incedently, if I manually set the flash cast member as direct to
stage, we get the same issue, only more exagerated. This must be a
bug in the 10.1+ player as we don't get the issue at all on
machines running the 8.5 player.
Simon

I have an iPhone 4S-whenever I take a picture using the flash, all I get is a white blob-pictures without the flash are fine. I tried using different cases, thinking a bounce off the case might be the problem, but the same thing happens. Any suggestions

I have an iphone 4s - whenever I take a picture using the flash, all I get is a white "blob". Pictures without the flash are fine. I thought the flash bouncing off the case might be the problem, but when I used different cases I still had the same problem. Any suggestions?

I have an iphone 4s - whenever I take a picture using the flash, all I get is a white "blob". Pictures without the flash are fine. I thought the flash bouncing off the case might be the problem, but when I used different cases I still had the same problem. Any suggestions?

Get rid of bright white background on web pages

I need to change the background color behind text to something other than bright white to lessen the eye strain I'm experiencing. Although I can change the color in Windows 7, when I'm online web pages still have that white background, and for older eyes this is a problem.

You could try Options>Content>Fonts and Colors>Colors>Background.
Play around with this for a while. There aren't many suitable colors but I use a creamy white for blank pages. You can check or uncheck "Allow pages to use their own colors . . ."

HT202118 my 3rd generation apple tv will not come on just a white flashing light my first generation one is working fine? tried unplugging it nothing, any help is much appreciated.

my 3rd Generation Apple TV will not come just a white flashing light i tried unplugging it for 30 seconds nothing tried the menu button and down arrow that did help as well and suggestion? Thank you I'm not very tech savvy.

Click on the blue link I gave. You would need to hook it to a computer running iTunes using a microUSB lead.
If you have an Apple Store nearby take it there and see if they can sort it out.
It is possible the display resolution is wrong - you could try holding menu and up arrow on remote together for 6 seconds which will make it cycle display resolutions - but only if it is actually working but showing a black screen due to wrong resolution selected.

When I open safari I get a blank white screen.

When I open safari I get a blank white screen. When I open top sites, and choose google, the screen is still blank, with the search bar at the top a quarter full. If it does open, it suddenly becomes unresponsive and returns to that blank, white screen. I'v tried everything I can think of, but nothing works.
On a side note, everything from mail to iphoto to word works - just not safari. I'm using a mid-11 iMac 21.5"i5 running on mountain lion.
Also did I post this in the right place? I'm new to this.

Read this whole message before doing anything.
Back up all data.
Quit Safari if it’s running. Then select
 ▹ Force Quit…
from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
Step 1
In the Finder, press the key combination shift-command-A to open the Applications folder. Select the Safari icon in that folder and press the key combination command-I to open the Info window. There’s a checkbox in the Info window labeled Open in 32-bit mode. Uncheck it, if checked. Close the Info window and the Applications folder.
If Adobe Flash Player is installed, select
 ▹ System Preferences ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
Caches/com.apple.Safari
Caches/com.apple.WebKit.PluginProcess
Caches/Metadata/Safari
Preferences/com.apple.WebKit.PluginHost.plist
Preferences/com.apple.WebKit.PluginProcess.plist
Saved Application State/com.apple.Safari.savedState
Leave the Library folder open. Try Safari again. If it works now, stop here. Close the Library folder. If you still have problems, continue.
Step 2
Triple-click anywhere in the line below to select it:
open $TMPDIR../C
Copy the selected text to the Clipboard (command-C).
Quit Safari again. Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). A folder should open. If there's a subfolder with the name "com.apple.Safari", delete it, even if it's empty. Quit Terminal. Close the folder. Launch Safari and test.
Step 3
If Safari still doesn’t work right, quit, go back to the Finder and move the following items from the open Library folder to the Desktop (some may not exist):
Cookies/Cookies.binarycookies
Internet Plug-Ins
Preferences/com.apple.Safari.LSSharedFileList.plist
Preferences/com.apple.Safari.plist
Preferences/com.apple.Safari.RSS.plist
Preferences/com.apple.WebFoundation.plist
PubSub/Database
Safari
(Note: you are not moving the Safari application. You’re moving a folder named “Safari.”)
Try again. This time Safari should perform normally, but your settings and bookmarks will be lost. The default set of bookmarks will be restored. Delete them all.
If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that may have been created in their place. You don’t need to replace the files you deleted in step 1. Stop here and post again.
If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select
File ▹ Import Bookmarks
from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
Note: This step will remove your Safari Extensions, if any, and their settings. If you choose to restore them, do so one at a time, testing after each step to make sure you haven’t restored the problem.
If you don’t like the results of step 3, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place.

I get one bright white flash in iDVD

Similar Messages

Maybe you are looking for