I get the following error on- and off in an app. The message is

Error -2147467259 occurred at CIT_ReadStringTrace.vi.
This error is being returned by the read string history VI.
If I put this VI in another dummy VI I can predict when it will occur (mostly). If repeatedly run my dummy VI until I stop getting this error (just hit run button) the main app never sees a problem. If I do not do this repeated run thing, my main app sees the error.
The code value almost makes it look like the tag history is being accessed via a serial port!
Go figure.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

The next day I started working with NI.
I was able to develop a VI that duplicates error I was seeing in my app.
NI was able to duplicate error.
See service request # 395330.
The same error by the "N" version of the same VI.
A serious memory leak was also noticed while using the continuous run button.
I will try to remember to update this question when NI (or I) come up with a fix or work-around.
Ben
(So hows that for an answer?)
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

I am getting the following error when I open my Safari Browser.the proceedure entry point sqlite3_wal_ check point could not be located in the dynamic link library SQLITE3.DLL

Try going back to a restore point > System Restore - Microsoft Windows

How do I fix the following error? itunes counld not back up the iphone because the back up could not be saved on the computer?

How do I fix the following error? itunes counld not back up the iphone because the back up could not be saved on the computer?

I updated to iOS 5.0.1 days ago and didn't receive that notification until just now...
This time I synced new photos I took yesterday, and it gave me the:
"iTunes Sync: 54 items could not be synced. See iTunes for more information"
Perhaps it kicks off when new items get synced.
I've decided to rent a movie yesterday. Once it gets deleted, I'm curious to see if it jumps to 55 items.

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

When ever i'm trying to install an app from the app store i'm getting the following error "We could not complete your purchase - The product distribution file could not be verified. It may be damaged or was not signed", plz help me to rectify this .

when ever i'm tring to install an app from the app store i'm getting the following error.
"We could not complete your purchase - The product distribution file could not be verified. It may be damaged or was not signed".
someone plz help me to overcome this.

Installing the appropriate combo update may help...
If you are running v10..7 Lion, install the OS X Lion Update 10.7.4 (Client Combo)
For 10.6 Snow Leopard > Mac OS X 10.6.8 Update Combo
Then restart your Mac. Try the App Store.
If that doesn't help, try the following..
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go
Move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading Mountain Lion.
You may also need to disable anti virus software and turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall

The following error has occurred: Upgrade Failed due to the following Error.The error code is :-2147467259.Message:Unspecified error

I mention my problem above, After show the error Shows another message box with try again and Cancel options. I have no choice finally i click cancel. Then setup shows several message boxes. Finally setup was failed. I referred several web sources but i
can't solve this issue.
I have Windows 7 32-bit machine, Intel Core i3 processor,4 GB RAM, Visual Studio 2010 SP1.

I searched my issue on the internet found issues on the forums. Someone told this error becoz of visual studio and aslo instruct to verify the Devenv.exe Config is in the correct folder. But it shows the error again. "Cannot find the the specified file".
I Restart my computer and again install only the database engine it also show some error.
The following error has occurred:
Failed to open the registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10.MSSQLSERVER1\MSSQLServer\SuperSocketNetLib or set its security descriptor: Attempted to perform an unauthorized operation..
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.2531.0&EvtType=OpenKeyOrSetDescFailed
Hi Sarath Jasrin,
According to your description, this error happens since some registry keys that need to be fixed do not have administrator access.We need to verify if you run setup.exe as administrator, and the account have permission to access the installation folder.
I recommend you open up the registry and navigate to the registry key with the issue can give the administrator access to the registry key, and then try to updata again.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

I cannot compress my video in compressor. everything was alright until I clicked the submit button. I received a dialogue box asking for the following: Name; Cluster and Priority.I cannot click the submit button. Thanks

Help

Hi Bill, again just trawling these forums in search of another prolem solution and ran over your post. I'm not sure if every problem reported in these forums requires removing the app's preferences or running a third party product that does it as well.. Sometimes it will work. Usually there's a process somewhere in Compressor or its subcomponents used in the OS that need to kicked in the arse or terminated and restarted or is handed a flawed structure it can't handle entirely and fails.
These failures are sometime echoed in /var/logs/folder/... or ~/Library/Logs/"this_application's.log" or ~/Library/LogsDiagnosticReports/"this_application's" dump. Yep u can view these with the /Applications/Utilities/Console.app or jump in to Qmaster through the Share Monitor.app as well.
Anyway not all these events get logged so sometimes it's difficult to know where to look especially with compressor and qmaster. Qmaster has its logs also in a temproary place then then are magically moved to /var/logs.
A good practice is to see if you can determine one of these flaws before getting the chainsaw and axe out for a "hack and bash session". Chances are you will have this again.
Elsewhere in these Apple Support forums and on the creativecow forums is a wealth of knowledge on compressor or Qmaster and other products. Always worth a simple Google search
Now, I'd propose that is likely that the current structure used by compressor and qmaster are in a less than optimum state!. Most of these are rebuilt if they are removed. All except the SETTINGS and LAYOUTS. So if you have any of your own settings, layouts or destinations and you dont want to lose them, go and make a second instance of these else where of fetch and reinstate them from Timemachine.app once you have restarted everthing after some suggestion I'm going to propose to you shortly.
The probable sources of state information may be deleted and Compressor and Qmaster can be started again. However before embarking on this easy walkthrough ......
Step 1: Stop Apple Qmaster your current host. (Compressor.app/Application Menu Apple Qmaster/Share This Computer / Setup tab/ and untick "Share This Computer").
count to 10 slowly and all the compressord tasks will stop. Qmasterd is still active...thats cool.
Step 2: QUIT Compressor.app on your current host.
Step 3: Make a second instance of your Compressor.app Settings , Destinations and Layouts: As stated a tonne of time in so many threads , that in Compressor 4, these structures for Qmaster and some of Compressors have been moved into the users home domain (i.e. ~/) in the ~/Library/Application Support/Compressor/Settings and ~/Library/Application Support/Compressor/Layouts directories. If you dont have any then move to the next step....
THerefore simply DUPLICATE or COPY them to another place such as your ~/Desktop. U can use the FINDER or simple unix cli commands such as:
cp -Rv ~/Library/Application\ Support/Compressor/Settings ~/Desktop
cp -Rv ~/Library/Application\ Support/Compressor/Layouts ~/Desktop
Step 4: remove | purge | delete compressors Lion/ML saved state.... ~/Library/Saved Application State/com.apple.Compressor.savedState
You can also remove the the saved state entry for Compressor.app so tha you wont be bothered with it trying to resstablish where it was when it failed or you last quit it.
rm ~/Library/Saved\ Application\ State/com.apple.Compressor.savedState or just selct and +del it in the trash (hold the OPTION key and select the Finder GO menu to access your homes ~/Library/)
After doing this you can basically destroy | delete | purge | remove your ~/Library/Application Support/Compressor and also your ~/Library/Application Support/Apple Qmaster directories
OK if you're up to it I will refer you to a post where this procedure is comprehensivley detailed. I'm fairly certain that when you follow this procedure and remove these compressor and Qmaster structure and restart then re-set up any clusters and networking, tha compressor will work amazingly well again.... probably like it used to.
Step 5: click over to ths apple forum post and follow the steps in there. No need to duplicate its contents here. The link is at https://discussions.apple.com/message/17356372#17356372%2317356372
Step n: well if you have returned to here hopefully compressor V4..app with Qmaster is running and its like brand new. 9 of 10 times this is the case.
Basically you have purged your current folders:
~/Library/Application Support/Compressor and
~/Library/Application Support/Apple Qmaster
Now a few more things to consider as mentioned in the post at https://discussions.apple.com/message/17356372#17356372%2317356372 is not to be too impatient. THese compressor and qmaster components take a little time to communicate and ready themselves. You will be able to see this via teh activity monitor.app and also right-gear-down on the compressor.app icon n the dock. Look for SERVICES. If you only have one, add some more in the qmaster prefs.
ALso make sure you c=can use Compressor.app / File /Mount Cluster Storage and tha you get a voluem for your cluster apearing in the list box.
No volume then qmaster is not set up.
You may have to do all the above again.
Lastly, the NETWORK settings used between hosts for Qmaster are often a point of noise and frustration. If u can disable your network just to get compressor/qmaster going on a single host. Often the comms causes a great deal of "waiting"scenarios in Compressor. U can see these in the Share Monitor.app.
Please report back you progress so tha others my benefit..
HTH
warwick

I get the following error when I deploy to oracle app server 10.1.3

\jdevstudio10131\jdev\mywork\spneeds1\spneeds1\deploy\ejb3.ear
Uploading file ejb3.ear ...
Application Deployer for ejb3 STARTS.
Copy the archive to /oracle/j2ee1013/j2ee/home/applications/ejb3.ear
Initialize /oracle/j2ee1013/j2ee/home/applications/ejb3.ear begins...
Unpacking ejb3.ear
Done unpacking ejb3.ear
Initialize /oracle/j2ee1013/j2ee/home/applications/ejb3.ear ends...
Starting application : ejb3
Initializing ClassLoader(s)
Initializing EJB container
Loading connector(s)
Starting up resource adapters
Processing EJB module: ejb3.jar
application : ejb3 is in failed state
Operation failed with error:
@PersistenceContext annotation can only be used when a javax.spi.PersistenceProvider is installed.
Deployment failed
Elapsed time for deployment: 4 seconds

A similar question is posted in jdev forums
please find answer to this question thier

When starting Firefox I get the following error: chrome://webvideodownloader/content/webvideodownloaderbar.js:172. I have to click on "Continue" or "Stop" button for Firefox to boot up.

Hi,
I started to get the following error every time I open Firefox. The message is chrome://webvideodownloader/content/webvideodownloaderbar.js:172
I started getting this message when I updated to Firefox 5. Every time, and I mean this literally, I open Firefox the above message appears. A box appears in the top right corner. Strange thing is that the whole box doesn't appear and the error doesn't appear completely either. It is like half the box is cut off at the screen's edge.
When this box appears there are two buttons: Continue and Stop. I have to click on one or the other for the Firefox browser to open. I looked at my plugins but don't see one with this location.
Please help.
Thanks,
Paul

That can be caused by clearing the cookies via "Clear Recent History".
* https://support.mozilla.com/kb/Clear+Recent+History
* Firefox/Tools > Options > Privacy > Firefox will: "Use custom settings for history" > [X] Clear history when Firefox closes > Settings
* Firefox > History > Clear Recent History or Tools > Clear Recent History
If you use "Clear Recent History" to clear the cookies then Firefox also tries to clear the cookies from plugins like Flash (LSO) and starts a plugin-container process for each plugin and that can add extra time and can cause an unresponsive script error to appear.
Make sure that all plugins are up to date.
Try to exclude the cookies to see if that helps.
Let all cookies expire when you close Firefox to remove unwanted cookies and keep the ones with an allow exception.
Make sure that you do not clear the "Site Preferences" as that will remove all exceptions.
* Tools > Options > Privacy > Cookies: "Keep until": "I close Firefox"

I am getting the following error at Import ABAP phase ...

Dear All,
I am getting the following error at Import ABAP phase when performing the system copy function (Import) via ./sapinst ( OS - LINUX and DATABASE-ORACLE 10g)...
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/RXT/SYS/exe/run/R3load: START OF LOG: 20090102154030
/usr/sap/RXT/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
/usr/sap/RXT/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Apr 1 2006 00:08:29
/usr/sap/RXT/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/RXT/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/RXT/SYS/exe/run/R3load: END OF LOG: 20090102154030
Thanx,
Amit

Dear Juan,
Trans.log is ;
isrxi:rxtadm 7> cat trans.log
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 02.01.2009 - 16:45:09
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Fri Jan 2 16:45:09 2009                              62 0.000062
4 ETW000 [dev trc     ,00000] db_con_init called                                    13 0.000075
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             21 0.000096
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/RXT/SYS/exe/run/dboraslib.so' ...
4 ETW000                                                                              26 0.000122
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/RXT/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000                                                                            9099 0.009221
4 ETW000 [dev trc     ,00000] Library '/usr/sap/RXT/SYS/exe/run/dboraslib.so' loaded
4 ETW000                                                                              16 0.009237
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/RXT/SYS/exe/run/dboraslib.so
4 ETW000                                                                              30 0.009267
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/RXT/SYS/exe/run/dboraslib.so' is "700.08", patchlevel (0.46)
4 ETW000                                                                              42 0.009309
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/RXT/SYS/exe/run/dboraslib.so
4 ETW000                                                                              21 0.009330
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/RXT/SYS/exe/run/dboraslib.so
4 ETW000                                                                              25 0.009355
4 ETW000 [dev trc     ,00000] New connection 0 created                              16 0.009371
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              21 0.009392
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         17 0.009409
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              15 0.009424
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              16 0.009440
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                        195 0.009635
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          1567 0.011202
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPSR3's password           14 0.011216
4 ETW000 [dev trc     ,00000] Connecting as /@RXT on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              15 0.011231
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              17 0.011248
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x9342150 0x9349ba0 0x935a298
4 ETW000                                                                              16 0.011264
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       15 0.011279
4 ETW000 [dev trc     ,00000] Allocating server context handle                      11 0.011290
4 ETW000 [dev trc     ,00000] Attaching to DB Server RXT (con_hdl=0,svchp=0x935a1c8,svrhp=0x935c4a8)
4 ETW000                                                                              63 0.011353
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000                                                                            1787 0.013140
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000                                                                              16 0.013156
4 ETW000 [dev trc     ,00000] Try to connect with default password                  46 0.013202
4 ETW000 [dev trc     ,00000] Connecting as SAPSR3/<pwd>@RXT on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              15 0.013217
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              16 0.013233
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x9342150 0x9349ba0 0x935a298
4 ETW000                                                                              15 0.013248
4 ETW000 [dev trc     ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x935c4a8)
4 ETW000                                                                              14 0.013262
4 ETW000 [dev trc     ,00000] Detaching from DB Server (con_hdl=0,svchp=0x935a1c8,srvhp=0x935c4a8)
4 ETW000                                                                              13 0.013275
4 ETW000 [dev trc     ,00000] Deallocating server context handle 0x935c4a8          20 0.013295
4 ETW000 [dev trc     ,00000] Allocating server context handle                      20 0.013315
4 ETW000 [dev trc     ,00000] Attaching to DB Server RXT (con_hdl=0,svchp=0x935a1c8,svrhp=0x935c4a8)
4 ETW000                                                                              25 0.013340
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000                                                                             430 0.013770
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000                                                                              16 0.013786
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000                                                                              85 0.013871
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000                                                                              15 0.013886
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'RXT'"
isrxi:rxtadm 8>
Regards,
Amit

Listener refuse connection with the following error ORA-12505

Hi Everyone, Am really new to oracle database, am working on my school project work and am stuck in a middle of this error (Listener refuse connection with the following error ORA-12505).
I have started the listener serveral time and it's saying that "No service surpported by the LISTENER", I can't access the database via sqldeveloper which trows out the same error (Listener refuse connection with the following error ORA-12505, TNS:Listener does not currently know of SID given in connect descriptor.) Moreover my em show red down arrow for the listener. Here are my hard & software details.
Oracle 11.1.0
Os: Red Hat Enterprise Linux 4 ( Running the OS via Vmware workstation)
TNSNAME.ORA
     LISTENER2=
     (DESCRIPTION_LIST=
     (DESCRIPTION=
     ((ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1522))
     LISTENER1=
     (DESCRIPTION_LIST=
     (DESCRIPTION=
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1523))
     LISTENER=
     (DESCRIPTION_LIST=
     (DESCRIPTION=
     (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521))
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521))
Listner,ora
     LISTNER_ORCL
     (ADDRESS_LIST=
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1523))
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521))
     IMT_ADMI=
     (DESRIPTION=
     (PORT=1522))
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1522))
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1523))
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521))
     (CONNECT_DATA=
     (SERVER=DEDICATED)
     (SERVICE_NAME=imt_admin
     LISTENER_IMTADMIN=
     (ADDRESS_LIST=
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1522))
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1523))
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521))
     ORCL=
     (DESCRIPTION=
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1523))
     (ADDRESS = (PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521))
     (CONNECT_DATA=
     (SERVER=DEDICATED)
     (SERVICE_NAME=orcl)
I read from some forums that I need to edit somethings of which am not really sure cos i don't wanna mess with the database, I need help on what to.
Thanks for help in advance.

Use a single listener. There is no need for multiple listeners 99.9999% of the time.
Have the listener bind the hostname as listening end-point - and not localhost.
Localhost only allows local processes to connect via TCP. Which is questionable in most environments. Typically you would run clients on other h/w platforms (or VMs) - and this will use the database server's public IPs.
Type hostname in the console to get the hostname of the server. If the network on that server is suspect (was not manually setup properly by someone knowing network basics), do not bother using the hostname. Use IP address +0.0.0.0+ instead.
Update the listener.ora file. The LISTENER entry should look something as follows:
LISTENER =
        (DESCRIPTION_LIST =
                (DESCRIPTION =
                        (ADDRESS_LIST =(ADDRESS = (PROTOCOL = IPC)(KEY = EXTERNAL)))
                        (ADDRESS_LIST =(ADDRESS = (PROTOCOL = TCP)(HOST = <hostname-goes-here>)(PORT = 1521)))
        )You can also simply (and safely) remove/rename the listener.ora file - and start the listener with sane defaults.
Next, use sqlplus (via the oracle o/s user) to logon as SYSDBA to the database. The database parameter of interest is LOCAL_LISTENER. It should be null (view it using the SQL*Plus command <i>show parameter</i>). If your listener port is 1521, then not a problem.
If it is not, you need to update/set this parameter with the appropriate port number via the ALTER SYSTEM command.
Once set/checked, manually instruct the database to register its services with the local listener, via the alter system register command in sqlplus.
Check and confirm that the listener has received and successfully serviced that registration request by typing lsnrctl services in the oracle o/s console.
PS. The reason for the error I think is that your are forcing the listener on localhost only - while the default/null local_listener parameter of the database instructs it to contact the listener on the default public IP address of that server. Which does not happen to be localhost IP 127.0.0.1.
Edited by: Billy Verreynne on Jan 11, 2013 1:06 PM

Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D

i keep getting this Event in my event viewer and dont know what to do. Could use any help

Hi,
Regarding the error messages mentioned here, have you checked the below thread?
Microsoft Security Client OOBE stopped
due to the following error: 0xC000000D
Please take a try with the methods suggested by the others above.
Best regards
Michael Shao
TechNet Community Support

Bsod Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D

I have a t540 with all hardawre and software updates running Win 7/64 pro and get this message repeatedly. Microsoft says to delete MSSEOOBE.etl but that file doesn't appear to be in the 64 bit version of Microsoft Security Essentials
If it happen when the PC is in SLEEP mode it causes an abnormal shutdown/recovery when the PC restarts Did uninstall and reinstall MSE
One MS thread says to contact the OEM - so here I am.
I was also getting Code 10 Disk Errors but there was a MS KB fix for that
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          5/29/2014 8:39:03 AM
Event ID:      3
Task Category: Session
Level:         Error
Keywords:      Session
User:          SYSTEM
Computer:      bill-THINK
Description:
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
    <EventID>3</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>14</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime="2014-05-29T13:39:03.627614300Z" />
    <EventRecordID>209</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="212" />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>bill-THINK</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="SessionName">Microsoft Security Client OOBE</Data>
    <Data Name="FileName">C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl</Data>
    <Data Name="ErrorCode">3221225485</Data>
    <Data Name="LoggingMode">5</Data>
</EventData>
</Event>
Any thoughts? I guess I will try another AntiVirus but Microsoft Security Essential is running on 2 other Win 7 laptops
Thanks

Hi,
Regarding the error messages mentioned here, have you checked the below thread?
Microsoft Security Client OOBE stopped
due to the following error: 0xC000000D
Please take a try with the methods suggested by the others above.
Best regards
Michael Shao
TechNet Community Support

At each startup I note the following errors: DefenderApiLogger

At each startup I note the following errors: 1-DefenderApiLogger Starting the session "DefenderApiLogger" failed with the following error: 0xC0000035 and 5 Activation of the app Microsoft.windowscommunicationsapps_8wekyb3d8bbwe! Ppleae38af2e007f4358a809ac99a64a67c1
failed with error: To enable applications, you need the management tool of the app, which is not running.
Windows 8.1 Pro 32-Bit Media Center ASUS P5G41T-M LE Ram 4GB

Nope, still have:
Microsoft-Windows-Kernel-EventTracing
Guid]
{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}
EventID
2
Version
0
Level
2
Task
2
Opcode
12
Keywords
0x8000000000000010
TimeCreated
SystemTime]
2015-02-09T09:36:18.241046900Z
EventRecordID
63
Correlation
Execution
ProcessID]
1976
ThreadID]
2044
Channel
Microsoft-Windows-Kernel-EventTracing/Admin
Computer
WIN-PACDC7GDV6A
Security
UserID]
S-1-5-18
EventData
SessionName
DefenderApiLogger
FileName
ErrorCode
3221225525
LoggingMode
402653568
System
Provider
Name]
Microsoft-Windows-Immersive-Shell
Guid]
{315A8872-923E-4EA2-9889-33CD4754BF64}
EventID
5973
Version
0
Level
2
Task
5973
Opcode
0
Keywords
0x2000000000000000
TimeCreated
SystemTime]
2015-02-09T09:36:25.912522500Z
EventRecordID
3993
Correlation
ActivityID]
{D68B230E-444B-0000-A224-8BD64B44D001}
Execution
ProcessID]
1412
ThreadID]
2948
Channel
Application
Computer
WIN-PACDC7GDV6A
Security
UserID]
S-1-5-21-42577835-3946092156-541665248-1000
EventData
AppId
Microsoft.WindowsAlarms_8wekyb3d8bbwe!App
ErrorCode
-2144927145

Retrieving the COM class factory for component with CLSID {5BDDE329-543B-411B-A14C-5EB01519338B} failed due to the following error: 80040154.

I am trying to run OLE Automation but I got an error during run time:
Retrieving the COM class factory for component with CLSID {5BDDE329-543B-411B-A14C-5EB01519338B} failed due to the following error: 80040154.
Code:
PhotoshopTypeLibrary.PhotoshopElementsApplicationClass app = new ps.PhotoshopElementsApplicationClass();
PhotoshopTypeLibrary.IAutoPSDoc NewDoc = app.Open(@"C:\psd1\test.psd");
I downloaded free SDK for Photoshop SDK CS 4 and I have Photoshop element installed on my machine.
Is this a known issue? Any help appreciated.

Try running the SharePoint Product Configuration Wizard and see if that clears up this issue.
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

I get the following error on- and off in an app. The message is

Similar Messages

Maybe you are looking for