I get the picture BUT NO SOUND - HELP!!!

Hello all,
I need help just bought apple tv and connected to my flatscreen samsung 1080p to the tv hdmi4 and i get picture but NO SOUND!! Am I missing a cable?? Do I need something else?? What do i do ???

I'm not familiar with your Denon specifically, but my Onkyo A/V amp has a settings menu for each input. Check the settings for the HDMI input you have the ATV connected to and make sure they are correct for your TV.
Also, as I mentioned previously, you could connect your ATV back to your TV directly with the HDMI cable, then connect the optical audio output on the ATV to an optical audio input on your Denon, then make sure it is selected when you watch the ATV to get digital sound.

Similar Messages

  • I am trying to move my  albums  with the pictures to a flash drive but I get the pictures but not in the album.

    How can I move my albums, including the title of the album , with the pictures to a flash drive. Every thing I try I only get the pictures but they are not in the album.

    Create a folder on the Desktop with the ablum name.  Then export the contents of your iPHoto album into that folder.  Drag the folder  onto the flash drive.
    OT

  • HT1551 I get a picture but no sound

    I can get video to stream, but no sound. 

    Hi Kipp Utemark,
    If you are havin audio issues when streaming video to your Apple TV, you may find the following article helpful:
    Apple TV (2nd and 3rd generation): Troubleshooting audio issues
    http://support.apple.com/kb/TS5150
    Regards,
    - Brenden

  • HT1600 hi i rented a movie and wanted to play it in my livingroom apple tv i get the picture but it says my audio is unsupported what can i do

    hi i recently rented a movie and when i wanted to play it on my apple tv the picture was there but it said unsupported audio i was watching it last night now its not working what could be wrong

    Welcome to the Apple Community Newbieappleguy.
    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    If you are using a sound system/receiver, make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

  • Satellite 1100-Z14: I get the only picture but no sound when playing DVD's

    I know mine is a fairly old notebook,but despite updating with latest firmware, I have an intermittent problem when playing DVD's (Reg 2) in that I get the picture but no sound, particularly with some older DVD's.
    CD's are ok.
    Toshiba repair agent says it is a software problem and they only deal with hardware problems.
    Can anyone tell me how I can deal with this problem please ? ( apart from getting a later model ! )

    I think I may have stumbled on the problem, I use IntervideoDVD7 and under audio effects there is an option
    'Sydney Theatre' etc, I changed it to 'off' and the sound cames back. maybe I should study their manual a bit more !

  • Itunes - Video file conversion (Picture but no sound)

    When I convert videofiles (avi, wmv) to Ipod/Iphone using Itunes i get the picture but no sound.
    Please help me.

    It's an issue with the file being multiplexed (a.k.a muxed, where the audio and video tracks are interleaved together into one track). iTunes can't export the audio from these files. Read more about it here:
    http://support.apple.com/kb/TS1721?viewlocale=en_US
    And then here:
    http://support.apple.com/kb/HT1588?viewlocale=en_US
    You can download a 3rd party program that will convert the files for you so they work properly. Check out this link:
    http://castfortwo.blogspot.com/2007/10/convert-muxed-mpeg-1-to-mov-or-mpeg-4.htm l
    I hope that helps. Good luck.

  • Pavilion g6-1b70us. Picture but no sound from tv when using HDMI. Previously worked no problem.

    I have a pavilion g6-1b70us that I am trying to hook up to my tv with an hdmi cable.  I get a picture, but no sound.  This previously worked with no problem.  When I pull up my sound playback settings the only options are speakers and headphones.  When I pull up my devices, the Samsung tv is there, but is described as a "generic monitor" (thought that was weird).  I have uninstalled and reinstalled my intel graphics driver and IDC audio driver but still no sound through TV.  Also, I will mention that in under control panel>devices and sounds there is a link to SRS Premium Sound.  As you can see in the picture below, the Samsung device shows up, but it is grayed out and cannot be selected. Can someone please help?
    This question was solved.
    View Solution.

    Well in case anyone is interested I fixed the issue (only took me 12 hours to figure out, lol).  Apparently even though the Samsung tv was not appearing in the sound playback options, you can still right click in the blank area and an enable/disable option will appear.

  • Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Why can't we use Acrobat Pro for mobile devices? Save a whole lot of headaches!!! Now I have to return this subscription.

  • I purchased a hdmi cable to watch movies and slide shows from my mac book pro to my sony bravia tv. i get picture through the tv but no sound. what am i doing wrong?

    I purchased a HDMI cable to watch movies and slide shows from my mac book pro to my Sony Bravia TV. I get picture through the TV but no sound. What am I doing wrong?

    Go to sounds in system pref and select outputs. When the hdmi cable is plug into the tv it will show as an option under output. Just select that option.

  • I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

    I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

    Recurring theme with the 4s losing alerts except for the phone ringing.  Most complaints seem to center on the 7.1 upgrade.  The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back.  When you get the sound back, the volume buttons start to work again.  Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

  • My screen is gone black when I restart I get the chime but no picture mac book pro can any help get me going again

    My screen is gone black on my mac book Pro.when I restart I get the chime but no picture mac.can any help get me going again

    Is the TV at minimum a 1080p with an HDMI port?
    What is your Machine ID?  DO NOT give us your serial number.  We just need the x and y values of the Machine ID in your system profiler as given in this format:
    MacBook Pro x,y
    This will tell us what display cables can connect to your TV.

  • I just watched my first movie using Apple TV and Netflix. Apple TV works great except for then I try to switch back over to tv mode I get the cable channel info on the bottom of the screen but no sound or picture. What did I I do wrong?

    I just watched my first movie using Apple TV and Netflix. Apple TV works great except for then I try to switch back over to tv mode I get the cable channel info on the bottom of the screen but no sound or picture. What did I I do wrong?

    It was easy to set up, easy to use, got done watching the movie.  Transferred from HDMI to TV and as my question above notes.  I am on TV, my cable information (show/channel/etc) show OM the banner on the bottom of the screen, I can view the channell guide, but, my screen is white, no picture no sound?  Other than that I got nothin

  • I get picture but no sound on my hd dvd player everything else works help!!!

    I have a sabre (hd) coby hd dvd player.  I get picture but no sound. My cable works and i can stream. It was working  ut now its not

    Certainly has nothing to do with Comcast, but you can always try unplugging/replugging whatever kind of cable you've got between the DVD player and the TV, and if using component, make sure all 5 connections are secure on both ends. 

  • HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

    Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

    You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
    You might try a 3.5mm to RCA adapter
    from the Mac Mini's headphone jack to the TV's audio input,
    but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
    Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

  • Using iphone to print to hp 8500a plus, but cannot get the picture centered on the photo paper

    using iphone to print to hp 8500a plus, but cannot get the picture centered on the photo paper    installed hp photo app on iphone to utilize printer

    Are you using Page Setup within Firefox?
    https://support.mozilla.org/en-US/kb/how-print-websites#w_changing-the-page-setup
    See - Margins and Header/ Footer

Maybe you are looking for

  • Windows Vista and iTunes does not work

    First Time sorry for my bad English, I'm from Germany and my English is not the best. I have the new Windows Vista but iTunes does not work good. And I have to use it, to manage my music on my iPod. When there will be a Vista compatibles Version of i

  • Cannot get questionnaire HTML string SAP CRM 7.0  EHP3

    Hello, We are trying to use questionnaires in Activities and it doesn't work. This error : Cannot get questionnaire HTML string is shown. I checked  Note 1600561 - Changes done in values template XSLT not taken into account, but it isn't valid for ou

  • Workspace Contents Report not working

    - Navigate to https://beehiveonline.oracle.com/BOLAdmin.html - Select Workspace Contents Report - A new window pops up with only the header line of the report

  • I don't understand how to put apps onto my iPod Touch with iTunes 11.1.12

    I recently just downloaded the newest iTunes, 11.1.12, and it's my very first time downloading apps. So I plugged my iPod in and went to the app store, downloaded a few apps, and I couldn't find them on my iPod, and I end up finding them in another f

  • How to migrate info spokes

    Hi can any one tell me how to migrate info spokes from 3.5 to BI.