I get the same error message for QuickTime

I went on www.vzwpix.com to view a video someone sent me. When I clicked to play it I received the following message: “This content requires the QuickTime® Plugin. Download QuickTime® Player?”
When I clicked yes, I was sent to your website and asked to download QuickTime 7.1.6 for Windows 2000/XP which I did but when I return to www.vzwpix.com I get the same error message when I try and play the video. I have even rebooted my computer and it still occurs.
Am I downloading the right program?
  Windows XP  

Hi there,
Jacumba is right.
The problems are actually Flash movies.
This is what you need to do:
Go into the QuickTime area of QT System Preferences, and in the Advanced tab look at the Mime settings (at the bottom). Under Miscellaneous is Flash media, that should not be checked, so click to make the square appear white. QuickTime can only really handle Flash 5 or earlier movies, and Flash is currently on v9.
The other Enable Flash box you saw is specifically to do with Flash tracks that are inside QuickTime movies already. You're given the option to turn that off because of potential, though unlikely no doubt, security issues.
You may need to log out and back in again for the changes to take effect.

Similar Messages

  • I'm getting an error starting Photoshop CS4.  Error number 148.3  Licensing for this product has stopped working.  I rebooted several times to no avail.  Still get the same error message everytime I try to start Photoshop.  I'm using Windows 7 -- 64 bit

    Error number 148.3  Licensing for this product has stopped working.  I rebooted several times to no avail.  Still get the same error message everytime I try to start Photoshop.  I'm using Windows 7 -- 64 bit

    If you can not use CS4 menu Help>Activate|Deactivate to get the install working again you may need to re-install CS4.

  • I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

    I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

    Thanks. Short of the sort of "generic" suggestions of restaring your system, if you haven't, and repairing disk permissions and verifying the disk, I don't have any advice right now. I'll do some research and see if I can come across anything. Meanwhile, someone else may have an idea.
    Regards.

  • I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

    I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed.  No other programs have similar problem. Any suggestion what can be done?

    I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

    On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

    Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
    http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  • TS1717 I can't open Itunes, I have an error that says says MSVCR80.dll is not found. I have tried twice to uninstall and reinstall but keep getting the same error message. Can anyone help?

    I can't open ITunes, I have an error message that says MSVCR80.dll is not found. Is anyone able to help solve this issue for me. I have tried to unistall and reinstall ITunes twice but continue to get the same error message.

    A msi file is short for microsoft installer.  It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program.  For some reason it isnt finding this so we can't update, install, or remove it.
    From what I have seen windows installer cleanup utility solved related problems before. 
    I found this forum about removing and installing a new iTunes.  It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help.   Using this should allow you to be able to install iTunes.  It won't give you the msi file but will allow you to isntall iTunes over again.
    This was what was said.
    Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Restart the PC, and try another iTunes install. Does it go through properly this time?

  • I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved.

    I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

    Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

  • CS6 on Windows 7 - when I try and send my project to Adobe Link, then to Encore I repeatedly get the error message "Encore has stopped working, windows will close the program".  I get the same error message when I try and open Encore on its own.  Help wou

    Both when I open Encore as a standalone program, and when I try and export my work via Adobe Link to Send to Encore, I get the same error message - "Adobe Encore has stopped working.  Windows will close the program.  Help would really be appreciated.  Thanks.

    Now that is impressive Stan, thankyou!  So simple ...  I don't suppose you know why the "build" button is greyed out do you?  Don't worry if you don't have more "magic dust" at your fingertips, I'll re-check my settings again, and again ...  Thanks for your help.  Doreen.

  • HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing.  I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

    Welcome to the forums.
    Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings.  You could start a new iDVD project, or try deleting encoded assets.
    Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have).  Double layer DVDs can be finicky and are used for video more than 2 hrs long.
    Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
    For a detailed treatise, see:  https://discussions.apple.com/thread/3926901?tstart=0
    John

  • I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

    I am trying to order a book with iphoto, I keep getting the same error message.
    " A network error occurred while processing your order, please check your network connection and try again"
    I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
    I have ordered two books a few months ago without any problems.
    Now I keep getting the same message either half way into
    the order or at the final hurdle after the images have been uploaded.
    Any ideas?
    My shared Network has been fine and that does'nt seem an issue.
    Help.

    Try again in a couple of hours - sometimes it is a temp condition
    LN

  • Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, it says I need to update itunes to 10.6.3 or later. I did, but still get the same error message.

    Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, dialog box says I need to update itunes to 10.6.3 or later. I did that update, but still get the same error message.
    Can anyone offer suggestions?
    Thanks!

    Since it told me to update, I updated to 10.7.
    Then when I plugged in the phone again, it gave the same message that I need to update itunes.

  • HT203176 i have a slow macbook, i ran live disk utilities and said I need to repair disk from a cd. did that, I got volume repaired from the external disk. when I reboot from hdd, then run disk utility, I get the same error message i did b4 repair

    i have a slow macbook, i ran live disk utilities (from hard drive), turned out I needed to repair disk from a installation disk. Did that, I got the volume (Hard drive) repaired from the installation disk disk. To this point, great!
    When I reboot from hdd, then run disk utility, I get the same error message i did b4 repair. I went thru two rounds of this.....
    Can anyone help? thanks

    Sorry guys, I don't see how to reply to you so I use reply to "me" basically.
    So the error I get is "volume header needs minor repair" and then you need to perform repair from the installation disk message.
    I did repair not verify from the disk twice. Every time ending in the "the volume had ha been successfully repaired". Then I reboot from the internal disk. Run disk utilities from it, do verify and get the same error message I got before repair. I hope this can shed some light fr you guys. Sorry I didn't include details in the original
    MEssage.

Maybe you are looking for