I get "there are non ASCII characters in the local part of the recipient's address" when trying to send emails as BCC. email addresses are all good!

I used to send out christmas greetings from my biz to groups of 20 customers, in BCC format. all addresses are good, but the emails don't get sent now because of the supposed ASCII problem.

Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Similar Messages

When I try to send an email I get a message - Non ASCII characters in the local part of the recipient address.

I am trying to send an emails to Italy. When I click send I get a message ( Non-ASCII characters in the local part of the recipient address). [email protected] is one of the email address I am trying to send to. My other email address' work OK. I have sent emails to these Italian address before with no problem.

Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

How do I get phone #'s to come up instead of email addresses when trying to send a MMS?

I just got my Galaxy S4 2 days ago and was trying to send a picture from my gallery as a text message to a friend. I know I can start from messaging, and then attach the picture, but I was already in the picture, so clicked on the messaging icon from the picture, and when I started typing my friend's name, it only brought up her email address, not her phone #. I didn't want to email her, I wanted to send it to her phone as a text message. The only way I could do this was to start typing her phone #, instead of her name. I don't know a lot of people's phone #'s by heart, so I don't understand why it isn't bringing up phone #'s when I start to type the person's name? I had the Droid Razr before, and that's how I always sent pictures. When I started typing a name it would bring up phone #'s and email addresses to choose from. If anyone knows how to change this, I would love to know how!

Try this:
Click on the Contacts icon
Select the Menu key
Select Settings
If the Only contacts with phones is checked, uncheck it

Replacing non-ascii characters in String

I have a site where the user enters data in a rich text
editor (ktml4) that gets stored into a database (mysql). There are
non ascii characters getting into the data, I'm assuming that they
are copying and pasting from Word. Unfortunately in this situation,
changing that process isn't an option.
Currently, this is the only character that is causing me
problems:
http://www.zvon.org/other/charSearch/PHP/search.php?request=ffa0&searchType=3
I would just like to replace the non-ascii characters with a
space when I read them from the database. Something like:
#Replace(result.column, '\xffa0', ' ')#
However, I believe that code looks for the string "\xffa0",
not the character \xffa0.
Is there anyway to do this?

quote:
Originally posted by:
BuckLemke
quote:
Originally posted by:
Dan Bracuk
rereplace might work.
Can you give an example of how to pass a non-ascii character
to REReplace?
Regular expressions are not my strength, but the approach I
was considering was, "if it's not an ascii character, make it a
space". Then you pass the entire string at once.

Cannot login with password containing non-ascii characters

Hello,
I have web application, form based login. UTF-8 is specified "everywhere".
And it works, except for passwords.
If user register itself with password containing non-ascii characters, it is correctly written in database, but when doing either programmatic login or normal form based login, if fails.
If the password is only ascii, it works.
Username of login could be ascii or non-ascii, it doesn't matter, both works.
I'm using sun java application server 9.1.
jdbc realm.
I'm not using hashing passwords, just clean (now)
I tried configure realm Charset: UTF8 as last chance, but it doesn't work either.
The problem is only with non-ascii characters in password.
Any help very appreciated
Thanks a lot

hi,
I know all that, but that's not the case. My app uses preparedStatements, everything is properly configured, in all pages, utf-8 is going from user to db and back without any problems.
The only problem is with password field. As I am using form based login, with jdbc realm configured (again, nicely working when only ascii characters), I have very little chance to do something bad through the login phase.
I'm not talking about special characters, I'm talking about non-ascii characters, let's say - Chinese, arabish, Russian alphabet etc.
When user registers (my code), the fields are properly written to db. I have checked that, trust me.
But the Sun app server realm seems to have some problems with the password field.
(realm uses jdbc connection to mysql, the url contains all extra parameters to be sure about utf8. there is nothing more what can be configured...)
If I try other alphabet codes in login and ascii in password, it works. But soon, as I use other alphabet code also in password, it doesn't work anymore.
My only idea is, that I could try MD5 to create ascii only characters (I hope it works that way) on the client with javascript and then set Digest to MD5 in realm configuration. But still, it seems very strange. The clear way storage should also function? (now set Digest to 'none')
Is it a bug of Sun App Server?
thanks

Filling clob with non ascii characters

Hello,
I have had some problems with clobs and usage of german
umlauts (��). I was'nt able to insert or update
strings containing umlaute in combination with string
binding. After inserting or updating the umlaut
characters were replaced by strange (spanish) '?'
which were upside down.
However, it was working when I did not use string bindung.
I tried varios things, after some time I tracked
the problem down to to oracle.toplink.queryframework.SQLCall.java. In the
prepareStatement(...) you find something
like
ByteArrayInputStream inputStream = new ByteArrayInputStream(((String) parameter).getBytes());
// Binding starts with a 1 not 0.
statement.setAsciiStream(index + 1, inputStream,((String) parameter).getBytes().length);
I replaced the usage of ByteArrayInputStram with CharArrayReader:
// TH changed, 26.11.2003, Umlaut will not work with this.
CharArrayReader reader = new CharArrayReader(((String) parameter).toCharArray());
statement.setCharacterStream(index + 1, reader, ((String) parameter).length() );
and this worked.
Is there any other way achieving this? Did anyone
get clobs with non ascii characters to work?
Regards -- Tobias
(Toplink 9.0.3, Clob was mapped to String, Driver was Oracle OCI)

I don't think the console font is the problem. I use Lat2-Terminus16 because I read the Beginner's Guide on the wiki while installing the system.
My /etc/vconsole.conf:
KEYMAP=de
FONT=Lat2-Terminus16
showconsolefont even shows me the characters missing in the file names; e.g.: Ö, Ä, Ü

Non ascii characters are padding without reason

Hi all,
here is my issue :
I have description field in my jsp page, when user enters some non ASCII characters as shown below :
This is user had entered the input string is :
"Hello Ã?Â?Ã?Â?Ã?Â?Ã?Â Hello" (without quotes)
When he edits for the first time without change anything in the the string and save, then it became :
"Hello Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã? Hello" (without quotes)
Then again one more time, it became :
"Hello Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â?Ã?Â? Hello" (without quotes)
Like wise it is getting increased its size. I'm saving the data to Oracle 10g database from jsp.
Please suggest what to do to rectify the problem.
Thanks & regards,
Achchayya

But I didnt changed anything from server.xml except two changes
1) from : <?xml version='1.0' encoding='iso-8851-1'?>
    to : <?xml version='1.0' encoding='UTF-8'?>
2)
from : <Connector port="8888" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
to : <Connector port="8888" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443"
               URIEncoding="UTF-8"/>here is my JSP :
<%@ page pageEncoding="UTF-8" %>
<html>
<head>
<title>The servlet example </title>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
</head>
<body>
<h1>A simple web application</h1>
<form method="POST" action="HelloWorld">
<label for="name">Enter your name </label>
<input type="text" id="name" name="name"/><br><br>
<input type="submit" value="Submit Form"/>
<input type="reset" value="Reset Form"/>
</form>
</body>
</html>Servlet Code :
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class HelloWorld extends HttpServlet {
protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
* Get the value of form parameter
     System.out.println("response char set "+response.getCharacterEncoding());
     System.out.println("request char set "+request.getCharacterEncoding());
response.setCharacterEncoding("UTF-8");
String name = request.getParameter("name");
String welcomeMessage = "Welcome "+name;
System.out.println("Name : "+name);
* Set the content type(MIME Type) of the response.
response.setContentType("text/html");
PrintWriter out = response.getWriter();
* Write the HTML to the response
out.println("<html>");
out.println("<head>");
out.println("<title> A very simple servlet example</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>"+welcomeMessage+"</h1>");
out.println("</body>");
out.println("</html>");
out.close();
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
     response.setCharacterEncoding("UTF-8");
     doPost(request, response);
} web.xml :
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4"
xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<servlet>
<servlet-name>HelloWorld</servlet-name>
<servlet-class>HelloWorld</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloWorld</servlet-name>
<url-pattern>/HelloWorld</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>
HelloWorld.html
</welcome-file>
</welcome-file-list>
<context-param>
     <param-name>PARAMETER_ENCODING</param-name>
     <param-value>UTF-8</param-value>
</context-param>
</web-app>please have a look at my files and suggest me BalusC.
Thanks for your patience.
regards,
Achchayya
Edited by: achayya on Oct 16, 2009 7:26 AM

Validation for non-ASCII characters

Hi all,
Requirement: I have to apply a validation on on fields like Name and Address in applicationdefination.xml. When a user types non-ASCII characters and navigates to next page then it should display the error message. Thus, I have to restrict my user to ASCII values only.
Present Situation: I'm using regular expression for this problem. In Jheadstart there is an option regular expression under the heading Validation. I have written following values in regular expression and Regular Expression Error Message options.
Regular Expression
^\s*[\w\.\,\-\_\#\'\/\\\ u0022\u0026\*\;\:\s]+\s*$
Regular Expression Error Message
It is important to note that foreign characters are not accepted on our system. Please ensure only standard English letters are entered
Since, i was getting error in jspx page due to double quotes(") and ampercent(&), So i have replaced the double quotes(") and amprecent(&) by their unicodes. Thus, the expression has become like ^\s*[\w\.\,\-\_\#\'\/\\\u0022\u0026\*\;\:\s]+\s*$.
This expression is validating many characters like Ã,µ,Ç,Ï,Ö,§,¥,{,} but not all non ASCII characters like ѓ є ѕ ї Њ Щ Ώ Ω Ϊ Ά Ή Θ Λ Ξ Π τ ẫ ờ Ỡ Ứ Ỷ ự Ẁ ỹ ị Ọ ň ũ ť ţ Έ Ϊ ﻍ. Thus, its not fulfilling the requirement.
Please suggest some valid solution to this problem. It’s very urgent.

Hi,
The validation seems to be performed in Java or Javascript depending on the layout (I'm sorry I can't remember the exact details). The expression suggested above by theEternalStudent works very well in Java, but not in Javascript.
We came up with an expression which works in both. It rejects strings which contain &# by doing a lookahead before the main pattern - you might want to expand this to look for &#nnn; but for our purposes &# is enough.
Here is the "platform neutral" solution:
(?!.*\u0026#.*)^[\w\.\,\-\_\#\'\/\\\u0022\u0026\*\;\:\s]+$
I think in future we will write a javascript function and amend the templates to call it directly.
thanks,
Michael

CMSDK Non-ASCII Characters and WebFolders

Hi,
i have the follow problems with the CMSDK and Microsoft.
windows-explorer:
It is impossible to enter a folder that contains non-ascii characters in the name.(the clientrequest will never send.)
After the doubleclick on the foldername, i get a errormessage an then the url in the editbox is ISO-8859-1 encoded, but this url will never send to the sever.
Other operations like create, rename, ... have no problems with non-ascii chars.
with the IE, i can enter without a problem.
MS Word:
I can't save any file with non-ascii chars in the name.
Only this methods are send:
PROPFIND
PROPFIND
GET
GET
But never a "PUT", without a non-ascii char in the name the traffic looks like this:
PROPFIND
PROPFIND
GET
GET
PROPFIND
LOCK
PUT
It is also impossible to enter a folder containing non-ascii characters in the name, form the word filesave-dialog.
URL UTF-8 encoding is enabled in the IE options and other operations (MOVE,COPY) are send correctly UTF-8 encoded.
is there any solution?
thanks
Maik

Have you set the following DAV Server configuration property:
IFS.SERVER.PROTOCOL.DAV.Webfolders.DefaultCharset
for your domain?
You have to configure it for the character set that you want your clients to use when connecting to iFS via WebDAV.
(You can use the web admin tool to change this property.)
The reason for this is that the Microsoft WebFolders client software does not transmit the client's character set to the server, so the server has no way of knowing what to expect.

Cannot rename file with non-ASCII characters when using the

My application moves files from one directory to another by calling File[] srcFiles = srcDir.listFiles() to get a list of files in the source directory, and then calling srcFiles.renameTo(destFile) to rename each file.
This does not work (renameTo returns false and the file is not moved) under the following circumstances:
- the file's leaf name contains non-ASCII characters, for example "�"
- the OS is Solaris 9
- the LANG and LC_* environment variables are unset, i.e. the C locale is being used
If I set the LANG environment variable to, for example, en_GB.UTF-8 then the rename succeeds.
I have tried calling srcFiles[index].getName().getBytes("UTF-8") and the non-ASCII characters are being replaced with ? (0x3f) characters when LANG is unset.
Is this a bug in the JRE? I would argue that since my code does not actually manipulate the filename (I just use the File object that File.listFiles() gives me) then the rename should succeed. Of course I would not expect the file name to be displayed correctly if I printed it out.
I have reproduced this behaviour with JDK 1.4.2_05 and 1.5.0_04 on Solaris 9.
Francis

Thanks for the info Alan.
I considered setting the locale in the environment (this sounds like the "correct" fix to me and we might implement it later), but this application shares a WebLogic server with many other applications so we would have to do a huge amount of testing to make sure that the locale change wouldn't break the other apps. In the end I worked around the problem by making the code that generates the filenames in the first place strip out any non-ASCII characters (the names of the files are not critically important).
Looking forward to JSR-203, in the meantime perhaps a note about this behaviour in the java.io.File javadoc would be useful.

[SOLVED] KDEmod - problem with mounting b/c of non-ASCII characters

Hi guys!
I finally set aside a few gigabites for Archlinux - it is no more in a virtual machine So far I managed to configure everything with the excellent wiki. It's runnin' and kickin'. I run accross only one problem:
When I insert a CD with a label that has non-ASCII characters (some Polish ones in my case) and I click on it's icon in Konqueror I get the message that "file such-and-such doesn't exist" - and the Polish characters are clearly misspelled (it is not a fonts' problem - I double checked). I can access the folder either via console or via konqueror if I go to the /media folder, though.
Any ideas how I can fix it? If you need more info, let me know.
Last edited by JeremyTheWicked (2008-05-31 14:46:07)

You're welcome . Now it's advisable for you to edit the title of your initial post: add [SOLVED]. Perhaps more clear wording would be in order, too, for the benefit of the search engine. The problem seems to be a trifle in retrospect, but somehow it takes some effort to find the solution, doesn't it ?

Problems with password including non-ASCII characters

I am a German language user with a German keyboard but an English OS as main language. Therefore my passwords (simple user and admin) includes non-ASCII characters used in German, French and Spanish language, which increases security. This works fine in the majority of login scenarios. There are, however, 3 scenarios where neither my non-ASCII simple user nor my non-ASCII admin PW are accepted:
1) running "sudo" in Terminal;
2) When I try to shut down and another user account is still open. Doing this brings up a login window asking for the PW of the other user that does not accept non-ASCII;
3) Using Leopard/SnowLeopard CacheCleaner. Upon opening, this app asks for an admin PW, but does not recognize non-ASCII.
Am I right in assuming that this has to do with non-ASCII PWs? I thought ASCII times were gone given the remarkable language flexibility of Mac OS over the years. I know this stupid problem only from Win XP. There it is even worse.
Is there a way to overcome this problem without always temporarily changing my PW? Thanks.

I think the problem is with the applications themselves and should be reported to the developer. Although some non-ASCII characters are acceptable for an admin password, in my experience most Unix systems don't like non-ASCII characters in passwords. It may be easier to avoid them if you can.
OS X should simply request your admin password to shut down when another user account is open. An alert dialog usually appears warning that the other user is still logged in and giving you the option to log the other account out then shut down. But in my experience the only authorization needed is for your admin account.

Inserting non-ascii characters to ORACLE using SQLPLUS

Hi
I'm using Oracle 10.2.
I would like to insert data with non-ascii characters, like éñ etc.
For example:
INSERT INTO FOO(NAME) VALUES ('abcñ');
The problem is this - when I use SQLDeveloper with this query - there's no problem. However when I use SQLPLUS - I see the ñ character messed up.
Most environments use some kind of escaping mechanism (like the \uXXXX in JAVA or %XX in URL escaping), but I simply can't find how to do so in SQLPLUS.
Can somebody help please?

Are you using "char" or "nchar" character datatypes? Make sure that the database character set defines the language script you need to support (see nls_database_parameters).

Does Oracle User Password can contain non-ASCII characters?

Hi Experts,
Can we create a user with password containing non-ASCII characters like "Ro'çá".
I was able to create a database instance by providing the password for sys as "Ro'çá". But now i am not able to login from command prompt using sqlplus or SQLPLUS Application. I am getting below error:
C:\Documents and Settings\xyz>sqlplus system/Ro'çá@test
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Jul 4 12:17:33 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name:
same in case i enclose the password in ""
C:\Documents and Settings\xyz>sqlplus system/"Ro'çá"@test
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Jul 4 12:17:33 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name:
same in case i enclose the password in ""
Also using create user i am not able to create user with password in non-ASCII characters but alter user works and changes the password to non-ASCII characters when enclosed in quotes.
I wanted to know whether the password can contain non-ASCII characters or not?
Thanks in advance for your help.

I don't think that the characters used are allowed. See this doc which only mentions three characters to be used .
http://download.oracle.com/docs/cd/E11882_01/server.112/e10575/tdpsg_user_accounts.htm#BEICECGF
I did try the same but it didn't work for me either.
SQL> select * from V$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> grant connect to user1 identified by Ro'çá;
ERROR:
ORA-01756: quoted string not properly terminated
SQL> grant connect to user1 identified by "Ro'çá";
Grant succeeded.
SQL> connect uesr1/"Ro'çá";
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to ORACLE.
SQL> connect uesr1/"Ro'çá"
ERROR:
ORA-01017: invalid username/password; logon denied
SQL> connect uesr1/"Ro'çá"
ERROR:
ORA-01017: invalid username/password; logon denied
SQL>HTH
Aman....

A Download servlet: non-ASCII characters not working

This is my servlet used for file download:
public void doPost(HttpServletRequest request, HttpServletResponse response) {
String filepath = request.getParameter("filepath");
String filename = request.getParameter("filename");
response.setContentType("application/zip");
response.setHeader("Content-Disposition", "attachment;filename=\""+filename+"\";");
ServletOutputStream sos = null;
BufferedInputStream bis = null;
try {
    sos = response.getOutputStream();
    bis = new BufferedInputStream(new FileInputStream(source));
    byte buffer[] = new byte[2048];
    int c;
    while((c = bis.read(buffer)) != -1)
      sos.write(buffer, 0, c);
} catch(Exception e) {
} finally {
    bis.close();
    sos.close();
}It does not work when the filename contains non-ASCII characters (e.g., extended ASCII, CJK ...)
What do I fix this? Thanks!

One possiblitiy that occurs to me is you have too many encoding things going on and you are sorta "over-encoding" things, as it were....
All I can think to do is give you this sample JSP page that I created when I was trying to figure all this web encoding stuff with forms back in the day. So perhaps you can use this as a basis for your own page.
// _lang.jsp
<%@ page language="java" contentType="text/html; charset=UTF-8" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
     <title></title>
     <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
</head>
<body bgcolor="#ffffff" background="" text="#000000" link="#ff0000" vlink="#800000" alink="#ff00ff">
<%
request.setCharacterEncoding("UTF-8");
String str = "\u7528\u6237\u540d";
String name = request.getParameter("name");
%>
req enc: <%= request.getCharacterEncoding() %><br />
rsp enc: <%= response.getCharacterEncoding() %><br />
str: <%= str %><br />
name: <%= name %><br />
<br />
<a href="_lang.jsp?name=<%= java.net.URLEncoder.encode(str, "UTF-8") %>">as link</a>
<br />
<br />
<form method="GET" action="_lang.jsp" encoding="UTF-8">
Name: <input type="text" name="name" value="" >
<input type="submit" name="submit" value="GET Submit" />
</form>
<form method="POST" action="_lang.jsp" encoding="UTF-8">
Name: <input type="text" name="name" value="" >
<input type="submit" name="submit" value="POST Submit" />
</form>
</body>
</html>

I get "there are non ASCII characters in the local part of the recipient's address" when trying to send emails as BCC. email addresses are all good!

Similar Messages

Maybe you are looking for