I get this error in PS3: Could not complete your request because of a program error

Only for opening raw files, but not JPEG.  Any help is appreciated.  Thanks

You're welcome.
There are detailed instructions on page 3 of the ReadMe file provided with the Camera Raw 4.6 update...
http://www.adobe.com/special/photoshop/camera_raw/Camera_Raw_4.6_ReadMe.pdf
A quick check of the camera list in the above ReadMe file does indicate that the D90 is supported, so it should work for you.
After running through the installation, double check that you have successfully installed Camera Raw 4.6...  Do this:
1.  Start Photoshop CS3.
2.  Choose Help - About Plug-in from the Photoshop menus.
3.  Look through the list...  Do you see one and only one entry for Camera Raw...?
4.  When you click on Camera Raw, does it show version 4.6.something?
-Noel

Similar Messages

  • Error "could not complete your request because of a program error" when editor is launched after PSE12 update.

    Installed PSE12 in July, Installed and operated without issue. Received a message on the iMac 21.5 running OS X 10.9.4 about an update for PSE 12 being available. I downloaded and installed the update. Now when the Editor of the app is launched, I get a message that says "could not complete your request because of a program error". If I click "OK", the editor will usually continue and operate without problem but sometimes it will launch to a full gray screen and with just the border and will not close, can not quit, and prevents the MAC from shutting down. I have the force quit the app to continue to use the MAC. I have tried safe mode and user admin with same error. I can't find any posting specific to this issue. I thought there was a method to reinstall PSE without uninstalling it but I can't find it. Should I just simply uninstall PSE 12 anad start over???

    It is a mute point now. PSE12 finally failed to the point it locked up the MAC. I had to restore the MAC OS from backup to a point before the PSE12 update.
    The MAC now operates correctly and so does PSE12. I don't think I'll be updating PSE any time soon.

  • Photoshop CS4 - getting error message that states: Could not complete your request because of a program error. Getting this message when

    Could not complete your request because of a program error. Getting error message every time I open the program and try to do anything. Have to Force Quit to close. Using a Mac. Your expertise is appreciated!!

    Have you tried removing all 3rd party plug-ins?
    Also, resetting preferences to defaults may help...  Press and hold Command - Shift - Option immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
    -Noel

  • I keep getting a message saying "Could not complete your request because of a program error"

    I keep getting a message saying ( Could not complete your request because of a program error??
    Does anyone know what this means or how to fix?

    blucoast,
    Can you please be more detailed? When are you getting this - what is causing it? Any specific tool or while starting Photoshop itself?
    Do you see an error number or error code or a report? Can you post that here?

  • Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank

    @Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank you!

    Without proper system information and other details like what files you work with  nobody can tell you much. From corrupted prefs to issues with your PS swap file to actual problems with the fiel storage this could be anything.
    Mylenium

  • When I try to save a photo, I get error message Could not complete your request because of a program error.  What's wrong?

    I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error."    I exit Elements, try again, same error. 
    In past I had this problem but it resolved when rebooted PC.  This time, PC reboot does not help.
    I cannot save anything i do in elements!!
    What's wrong?  Any suggestions how to fix this?   Anyone know what the program error is

    Please mention your PSE version and underlying OS.
    Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
    Regards
    Kishan

  • When opening a file in Photoshop CC I get 'Could not complete your request because of a program error.'

    I can see this is a generic error message('Could not complete your request because of a program error.') and I have done my best to read through many of the responses.
    It occurs on the second, third, or sometimes fourth file that I try to 'Open', however I can still use the 'Open With' command through Finder.
    I have tried resetting the preferences as per Julieanne Kost's recommendations, I have reinstalled Photoshop CC 2014, Generator isn't turned on, I don't have any Third-Party plug-ins loaded, I have tried running it in Safe mode, and I have reset my iMac's PRAM.
    Photoshop doesn't appear to be writing a PSErrorLog.txt file?   (~/Library/Preferences/Photoshop CC Settings/PSErrorLog.txt)
    I haven't had any other issues.
    I am running Photoshop on OS X Yosemite 10.10.2.
    Please can you help me?

    Does anyone have any other ideas as this is very frustrating.
    Thanks,
    James

  • When I open a raw file (NEF Nikon 7100)  and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

    when I open a raw file (NEF Nikon 7100)  and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

    Oh, dear.
    If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
    OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
    I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
    PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

  • When I click on Define Custom Shape, I get an error message: "could not complete your request because of a program error."

    I'm using Photoshop CC 2014. When I click on Define Custom Shape, there is an error box that says "could not complete your request because of a program error."  How can I solve this problem or work around it? I've looked on the internet for answers but could find no solutions to this. The custom shape tool is 99% of what I use!

    Consider resetting the Pen tool by right clicking here
    and if that doesn't solve the problem a logical next step would be to reset your Preferences.
    To reset Preferences:
    If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
    A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.
    By the way, if "The custom shape tool is 99% of what I use!" have you considered Illustrator?

  • Error:  "Could not complete your request because of a program error" (photoshop CS2 9.0.2 on MAC OSX

    Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
    I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
    I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
    Does anyone have any info as to what the problem may be and how to correct it.
    Thanks

    Thanks for the response. OK... This is the first day I have been able to get back to the problem.
    My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
    Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
    I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
    I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
    Again thanks for taking the time to respond to this issue.

  • Effects not working? "Could not complete your request because of a program error?"

    Hey guys&gals - I have always had this problem when working in RGB/CYMK modes - can anyone help me with that?
    More more importantly, now I am getting in in Grayscale mode as of this morning.
    I run Photoshop 6 V 13.1.2 x64 and just updated it this AM.
    Effects are crucial for my job, so I need this fixed asap!!
    I have tried the ctrl, alt, shift start up to no avail. Restarted, shutdown my PC as well.
    Please advise!
    Thanks,
    blaqgranitelaser

    Found the places I was supposed to - now what? Photoshop isn't crashing... doesn't give me any info other than a box saying "Could not complete your request because of a program error." And I have no choice but to click OK. This only happens when I try to use the layer effects in any color mode. Originally it was only in RGB/CMYK but now also happens in Grayscale.
    I'm not technologically savvy - I know what programs I use, but that is all.

  • Can't open file: "Could not complete your request because of a program error"

    I have a Photoshop file that suddenly won't open.  Last week I upgraded to CS5--the file had been created in CS3 prior to that.  When I try to open it, I receive this error message (in CS5): "Could not complete your request because of a program error."  I tried to open the same file in CS3; there, the file opens, but as soon as I try to do anything I get the same error message....which, annoyingly, re-appears the second I click "OK," so the only thing I can do in CS3 is force-quit.
    I've used Time Machine to retrieve versions of the file that were saved four days ago, seven days, and several weeks ago, and I get the same message every time.  Even on versions that were last saved with CS3 (before I installed CS5).
    Naturally, this is one of the most important files in my life right now....it's a 300 MB file that contains hundreds of layers and dozens of comps.  So the fact that I suddenly can't open it, after shelling out $1200 to upgrade to the latest and greatest Adobe has to offer, is, to say the least, distressing.
    Any advice will be appreciated.
    Thanks,
    TheWocky

    First thing I would do is investigate hard drive issues and the health of the OS.

  • Cannot open files ~ Could not complete your request because of a program error

    I can inly open 3 files and then I get this error message ~ Could not complete your request because of a program error
    Please help, I am in the middle or a project ...
    Thank you,
    Linda

    There is likely a font on that system that's corrupted or for some reason Photoshop just can't deal with.  Fonts are complex things, and it's well known that bad fonts can crash applications.
    Ferreting out such a font is normally a matter of removing all but the default fonts, seeing that the problem is corrected, then adding the fonts back in systematically until the offender is isolated.  Yes, this can be tedious.
    If it's not a font problem, there's a possibility it's a display driver problem.  To help diagnose that, go into Edit - Preferences - Performance, disable OpenGL Drawing, then restart Photoshop.  If the problem goes away, you'll want to check the web site of the maker of the video card for driver updates.  Don't forget to re-enable OpenGL Drawing again after updating the driver.
    Good luck.
    -Noel

  • CS3 "Could not complete your request because of a program error" message

    I am running Photoshop CS3 and I just upgraded to leopard 10.5, the latest version of leopard. My processor is a dual 2.5 ghz powerpc G5 and I have 4.5 GB DDR SDRAM.
    Upon opening the program (whether I'm opening a file or just opening the program) I'm getting a "Could not complete your request because of a program error," error message.
    After clicking ok, I get infinite dialog boxes and have to force quit the program.
    Any known solutions for this?

    Yes, I had that happen this morning as well. That message appeared after I opened a psd file, when it asked if I wanted to update text layers. I clicked ok, the file opened (it's layers appeared in the layers palette), and that that program error dialog popped up immediately after. I never could get it to go away, it just kept appearing in succession. Were you trying to open the file over a network?

  • Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".

    this was supplied by Ann Shelbourne.
    Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".
    These files will often open in Photoshop 7.0.1 or in CS1 but not in CS2.
    The trouble may be caused by bad dates in the EXIF data and can originate from an incorrectly-programmed digital camera; or from a scan that was created after after Jan1 of this year (because of a known bug in some scanner software).
    If someone runs into the "Could not complete your request because of a program error" problem, and does not have CS1, try opening the Tiff in TextEdit.
    The EXIF data is right at the top. Check the EXIF data for bad creation dates and change any incorrect ones there.
    Save and close; and then the file will probably open in CS2 without a murmur.

    > If iPhoto causes problems why not open the images from the Finder?
    I get the error if I open a file from within iPhoto using "OPen in external editor" and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
    I get the error if I do "Show file" in iPhoto to see the file in the Finder. Then, if I double-click and it opens in PS, and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
    > And with »save it anywhere« You indicate that You use the Save As-command?
    Right.

Maybe you are looking for

  • IDOC to SOAP Synchronous

    Hi Team,                 Is it possible to do IDOC to SOAP in Synchronous, if So could you please help me with necessary steps involved in doing the scenario. Regards, Amruth

  • How can I IM a apple support agent over the web?

    anyone know how you can do this? I did it before, but now I can't seem to find it...

  • Strange File in Skype Process

    Can Skype explain the presence of a file running as a process with a .tmp extension? The file SKYDC1E.TMP is the file in question running out of the Windows\TEMP Directory. Is this a legitimate Skype process? Where one would expect the SKYPE executab

  • Location of Attached files

    Hi All, I am working on Sourcing 7.0 project management part. I attached some files through "attachment" icon at toolbar level.But i m unable to locate where that file got store. Please share your view. Thanks, Vignesh

  • Can't install DNS server or zone?

    I believe I have made a mess. I have an existing old Netware server currently running DNS. I have 3 OES11 servers all running DHCP with no issues...