I get this error message: AutoPostToeCollege(): Internal System Error. Unable to connect to the remote server

I get the following when I try to use the bookmark for Corinthian Colleges, a bookmark I've successfully used for nearly two years. With the recent update to Mozilla, it no longer works.

I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Similar Messages

  • "Unable to connect to the remote server" error message (ID 6102) in event view after installing MOSS 2007

     Hi brothers,
    After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
     Event Type:        Error
    Event Source:    Office SharePoint Server
    Event Category:                Launcher Service Event ID:              6102Date:                     11/27/2007Time:                     8:22:17 AMUser:                     N/AComputer:          MOSS-001Description:LoadBalancer.RegisterLauncher failed:  Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 
    Please help me, thanks.

    Hi,
    i think this has to do with the "Document Conversions Load Balancer Service".
    If you don't need the service than try to stop it:
    Start Central Administration > Operations > Services and stop the service.
    or 
    If you need it the service, try this:
    Start Central Administration > Operations > Service Account
    Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
    Hope this helps!
    Cheers,
    Daniel Bugday
    Web:
    SharePoint Forum
    Blog:
    Daniel Bugday's SharePoint Blog

  • We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

    We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means  

    Hello,
    Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
    For example:
    Report server:http://uebi.cloudapp.net/reportserver
    Report manager:http://uebi.cloudapp.net/reports
    If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a  virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
    on port 80.
    Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Web Service Error : Unable to connect to the remote server

    Hi,
    I encountered below errors while I run the web service in ERP 2006 system :
    Unable to connect to the remote server,
    No connection could be made because the traget machine actively refused at xxx.xxx.xxx.xxx:443
    Pls kindly advise.
    Thanks.
    Edward Tso

    Hi,
    Do you have proxy server , check property added t.o the java proxyparameter .
    Also check the log , any fire wall restricting the connection.
    Its better, you put error log you get.
    Regards
    Nagaraju

  • Unable to connect to the remote server error

    Hi All,
    I am new to visual studio web development. when I try to run my application  locally it is throwing the below error. I don't know exactly but I think it is unable to access webservice on my local machine. I have turned off all firewalls. Can some one
    please help me? I would really appreciate your help. Thanks.
    ESHANI. Please click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you

    Hi All,
    I am new to visual studio web development. when I try to run my application  locally it is throwing the below error. I don't know exactly but I think it is unable to access webservice on my local machine. I have turned off all firewalls. Can some one
    please help me? I would really appreciate your help. Thanks.
    ESHANI. Please click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you
    Hello,
    For web development issues, you could post them in
    https://forums.asp.net forum to get help.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

    I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

    See my answer to your previous duplicate question. What happened when you tried my answers?
    LN

  • I have windows 7 and Itunes 10.  I the the error of Unable to connect to the CDDB server when I try to get tune names

    I have windows 7 and Itunes 10.  I the the error of Unable to connect to the CDDB server when I try to get tune names.  I can still connect to iTunes store and I can still summit track names to the CDDB server.  I just cant recive the names from the CD's.  I read this problem on the community and I've checked that the  proxy server from Lan is unchecked.  I use a verizon wireless card for my internet if that matters.

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Unable to connect to the Linux server - getting a message - username and pa

    Hello,
    I am unable to connect to the Linux server - getting a message - incorrect username or password . I have used this number of times and I am sure I am using the correct username and password.However, I tried to log in this time after few months to the Enterprise linux server and got this message. I have the VMware version 2.5.0 build-122581. I am using the Enterprise Linux 2.6.9-89.0.0.0.1.Esmp OS to use the Oracle EBS R12 off it. When I click the console in the VMware it starts the Linux. While it is at the 'Network starting, stage it shows 'Determining IP information : Failed' and few lines down the line 'starting smartd': Failed as well, while others are ok. I suspect these are cause of the message 'Incorrect username or password'.
    What may be the issue? How do I resolve it?
    Any urgent help would be highly appreciated.
    Arunasish Sircar

    Hello Hussein,
    I cannot copy paste as I already mentioned. However I am just typing it from the text that I see - bottom few lines.
    Root Services Enabled
    Root Service Oracle Process Manager for PROD_linux adopmnctl.sh started
    Web Entry Point Services Enabled
    Web Entry Point Services Oracle HTTP_Server PROD_linux adalnctl.sh started
    Web Entry Point Services Oracle HTTP_Server PROD_linux adalnctl.sh started
    Web Entry Point Services Oracle OracleTNSListenerAPPS PROD_linux adapcctl.sh failed
    Web application Services Enabled
    Web application Services OACORE OC4J Instance PROD_linux adoacorectl.sh failed
    Web application Services FORMS OC4J Instance PROD_linux adfomsctl.sh failed
    Web application Services OAFM OC4J Instance PROD_linux adoafmctl.sh failed
    Batch Processing Services Enabled
    Batch Processing Services OracleConcMgrPROD_linux
    adcmctl.sh started
    Batch Processing services Oracle fulfillment server PROD_linux jtffmctl.sh started
    Other Services Disabled
    Other Services OracleFormsServer-Forms PROD_linux
    adformsrvctl.sh disabled
    Other Services Oracle Metrics Client PROD_linux
    adfmcctl.sh disabled
    Other Services Oracle Metrics Sever PROD_linux
    adfmsctl.sh disabled
    Other Services Oracle MWA Service PROD_linux
    mwctlwrpr.sh disabled
    Service Control is exiting with status 4
    I hope you can let me know how to resolve it.
    Thanks,
    AS

  • TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    -Griff W.

  • Possible workaround for: Launch Debugger Error "Unable to connect to the RDS server"

    I do not yet have a reproducible case for this. *Sometimes* ColdFusion Builder throws the "Unable to connect to the RDS server" error, when attempting to start a debug session against a remote server. However, "RDS Dataview" and "RDS Fileview" views correctly list the servers and their related data/file, and testing RDS connection result is "Test connection was successful". The workaround is:
    1. Login to the ColdFusion Administrator
    2. Navigate to "Debugger Settings" page (beneath "Debugging & Logging")
    3. Click on "Stop Debugger Server" -or- "Restart Debugger Server"
    4. Restart ColdFusion Application Server
    Notes:
    a) Step #3 must be done via ColdFusion Administrator, not via ColdFusion Admin API (stopLineDebugger()|restartLineDebugger())
    b) Step #4 can be done via ColdFusion Administrator -or- ColdFusion Builder
    c) Note that there is a CF9 Release Note for Bug #78488: "When a server having "Windows service option" ENABLED is added as a remote server, then Start-Stop-Restart operation cannot be done on it."  However, I've found that "Restarting" a remote server, that is running as a Windows service, is possible in ColdFusion Builder (at least this is so on standalone developer edition).  Like Bug #78488 says, I am unable to "Stop|Start" a remote server that is running as a Windows service. I'm just mentioning all of this, due to my suggestion in "b", that CF can also be restarted via ColdFusion Builder.
    It is interesting that attempts to stop|restart the debugger server, via CF Admin API, do not resolve the issue. So, it seems that the "Stop Debugger Server" and "Restart Debugger Server" buttons, in CF Admin, are doing more than calling the corresponding CF Admin API methods.
    Attached is an image of the error.
    Just posting all of this as an FYI, in case it helps anyone.
    Thanks!,
    -Aaron Neff
    (OH.. I'm unable to attach images at this time *DOH!* ..well, I'll try to remember to update this post w/ the image, once I see that attachments are allowed.)
    I'll try to describe the error message window:
    - It is 494x452 pixels
    - Title of the window is "Error occurred while launching the Debugger"
    - Body content of the window is as follows:
    Unable to connect to the RDS server 'ServerNameHere'
    Ensure that the server is currently running and that line debugging and RDS are enabled. You may also need to check your RDS connection settings in Eclipse to ensure that they are correct.
    Error Message:
    -1:Error connecting to JVM for debugging at localhost:5005. Could not attach to the VM at port 5005. You must specify this debugger port in the JVM settings of your application server, for example: -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005. You will also need to make sure that another debugger is not currently connected to the CF JVM at the same port (5005).
    Root cause ->
    Connect refused: connect

    hi,
    I have been facing the same problems while connecting to Oracle Web Conferencing and is getting error message :Unable to connect to the server. The Web COnferencing Console will now close. Please try again later. If the problem persist, contact your system administrator.
    Diagnostic report shows failed on the connectivity part
    Connectivity
    mx-direct Failed
    0:00:00.719 Connecting to web331.oracle.com:1025
    0:00:00.922 Name resolved to 148.87.108.234
    0:00:21.906 connect() failed (0x8007274C)
    0:00:21.906 Connection failed (0x8007274C)
    Pl help me to fix the problem.
    Regards
    Gobind Ahuja

  • Outlook is unable to connect to the proxy server.(Error Code 10)

    Hi,
    I had problems with RPC proxy, I was trying to setup cutover migration.
    So I read somewhere that i need to change the certprincipalname with Set-Outlookprovider.
    But after this change my outlook was not working anymore
    The settings before the change were:
    Name                          Server                        CertPrincipalName             TTL
    EXCH                                                                        
                 1
    EXPR                                                                        
                 1
    WEB                                                                          
                1
    So I set this back to the original (above) but this didn't helped...
    Outlook 2013 and Exchange 2013
    There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site mail.abc-company.com.
    Outlook is unable to connect to the proxy server.(Error Code 10)

    Hi,
    Please make sure the mail.abc-company.com is included in your Exchange certificate which has been assigned with IIS service.
    If possible, please run the following command for double check:
    Get-ExchangeCertificate | FL
    For Autodiscover service, please run
    Test E-mail AutoConfiguration to check if the connection is successful in Log tab and confirm the other services URL can use proper namespace in Results tab for request access.
    If the Autodiscover service fails, please create a SRV record with mail.abc-company.com for Autodiscover service to have a try:
    http://support2.microsoft.com/kb/940881/en-us
    Regards,
    Winnie Liang
    TechNet Community Support

  • Outlook is unable to connect to the proxy server.(Error Code 10) when users opened Outlook 2010

    Hi All
    Exchange Server - 2013 CU2 (Windows 2012 Standard)
    AD Server - 2003 R2 SP2
    exchange-svr01.domain.com - internal name
    mail.company.net - external name
    When users opened Outlook 2010, they will encountered
    "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site exchange-svr01.domain.com.
    Outlook is unable to connect to the proxy server.(Error Code 10)"
    I also used the Microsoft Remote Connectivity Analyzer to test RPC/HTTP connectivity.
    The RPC/HTTP test completed successfully.
        Validating the certificate name.
         Certificate name validation failed.
         Host name company.net doesn't match any name found on the server certificate CN=AMAZONA-U59HG9G.
    Testing SSL mutual authentication with the RPC proxy server.
         The test passed with some warnings encountered.
    The certificate common name company.net doesn't match the mutual authentication string provided mail.company.net; however, a match was found in the subject alternative name extension.
     please help.

    Hi PS CL
    [PS] C:\Windows\system32>Get-OutlookAnywhere
    RunspaceId                         : c457e8aa-a0f3-4a0f-aa02-9eff24d02821
    ServerName                         : exchange-svr01
    SSLOffloading                      : True
    ExternalHostname                   : mail.company.net
    InternalHostname                   : exchange-svr01.domain.com
    ExternalClientAuthenticationMethod : Negotiate
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    XropUrl                            :
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    MetabasePath                       : IIS://exchange-svr01.domain.COM/W3SVC/1/ROOT/Rpc
    Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
    ExtendedProtectionTokenChecking    : None
    ExtendedProtectionFlags            : {}
    ExtendedProtectionSPNList          : {}
    AdminDisplayVersion                : Version 15.0 (Build 712.22)
    Server                             : exchange-svr01
    AdminDisplayName                   :
    ExchangeVersion                    : 0.20 (15.0.0.0)
    Name                               : Rpc (Default Web Site)
    DistinguishedName                  : CN=Rpc (Default Web
                                         Site),CN=HTTP,CN=Protocols,CN=exchange-svr01,CN=Servers,CN=Exchange
    Administrative
                                         Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=domain,CN=Microsoft
                                         Exchange,CN=Services,CN=Configuration,DC=domain,DC=COM
    Identity                           : exchange-svr01\Rpc (Default Web Site)
    Guid                               : 33c3cb74-e490-487d-844c-4072334089a1
    ObjectCategory                     : domain.COM/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
    ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
    WhenChanged                        : 8/17/2013 10:14:55 AM
    WhenCreated                        : 6/25/2013 1:47:50 PM
    WhenChangedUTC                     : 8/17/2013 2:14:55 AM
    WhenCreatedUTC                     : 6/25/2013 5:47:50 AM
    OrganizationId                     :
    OriginatingServer                  : ADserver.domain.COM
    IsValid                            : True
    ObjectState                        : Changed

  • Unable to connect to the report server error

    Hi all,
    I have formula.jsp file, in that i have all the parameters to connect with the Crystal Report server. I have Crystal Report Server 2008. While executing this jsp i got the following error,
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: Unable to connect to the server: 192.168.1.92. --- Connection refused: connect
         org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:512)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    root cause
    javax.servlet.ServletException: Unable to connect to the server: 192.168.1.92. --- Connection refused: connect
         org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:843)
         org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:776)
         org.apache.jsp.formula_jsp._jspService(formula_jsp.java:143)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    root cause
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: 192.168.1.92. - Connection refused: connect-- Error code:-2147217387 Error code name:connectServer
         com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
         com.crystaldecisions.proxy.remoteagent.TCPIPCommunicationAdapter.connect(Unknown Source)
         com.crystaldecisions.proxy.remoteagent.z.a(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ClientDocument.new(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
         com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source)
         org.apache.jsp.formula_jsp._jspService(formula_jsp.java:93)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    But, in Crystal Report Server XI Relese 2, the formula.jsp file connecting with server and display the reports.
    Why it is not working for 2008 server alone? Please help for this. If you need the jsp i will update.
    Thanks,
    shiva

    Hi,
    We are facing a similar kind of issue, when trying to access/ view crystal report using JAVA sdks.
    Please find the below error:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: Software caused connection abort: socket write error
    Error code:- 2147217387 Error code name: connectServer
    Please let us know if you were able to resolve this.
    Thanks in advance,
    Krishnam

  • Community Publishing-"Unable to connect to the CPS server" Error

    I am trying to connect to Community publishing.
    I download the Community Publishing Air app, but when I put in my username/password,
    I get this error "Unable to connect to the CPS server. Please make sure your firewall settings allow access to this url:
    http://cps.corp.adobe.com/nioamfpoll".
    I have updated Air, but got the same behavior.
    I am running osx (10.6.6)  on a 8 core Xeon.
    Any suggestions?
    Thanks
    Clay

    Hi Clay,
    Do you have a firewall, or are you behind a corporate firewall that blocks certain ports on your machine?
    What do you see when you visit this URL?
    http://cps.corp.adobe.com
    How about the following URL?
    https://cps.adobe.com/nioamfpoll
    Thanks,
    Puny Sen

  • Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

    Hi all,
    From time to time (at least once a day), the following message pops up on the user's screen:
    "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
    If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
    Any ideas?
    Thank you in advance

    Hi,
    For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
    Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
    http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
    Thanks,
    Angela Shi
    TechNet Community Support

Maybe you are looking for