I get this message "request timed out" everytime i tried to play a video .

I've been having this problem for serval months now and it's annoying at first i used to watch videos and movies normal , but now everytime i try to visit a website to watch a movie when i click play i get this message " request timed out " after two minutes , i have downloaded google chrome , and it worked fine only for serval mins and then when i try to play or watch movies it's still giving the same error , btw i'm connected to internet via my home wifi connection , and yeah i restarted the ipad and switched the router off and on again and nothing changed , what is wrong with my ipad , how could i solve this annoying issue !

I've been having the same issues too, and thought it was just my outdated computer or account?!
Every time I try to purchase a song, "session has timed out" shows up after I click "agree" to the terms!? I seem to be in the exact same scenario as 'SportsBarn' above:  Itunes support have replied repeatedly with the same "solutions" but nothing has helped or even been applicable.  I have an older laptop, 2005 Powerbook running OS X 10.4 Tiger so it's not compatible with the latest iTunes 10.5.2 which requires minimum OS X 10.5. I've been using the balance already in my iTunes account (from redeemed giftcards over the past few years) with no problem, until recently (my last successful purchase was October 2011). I wonder if it's the older OS or just a redemption glitch even with newer computers?

Similar Messages

  • Why wen I put in my password I get a message 'request timed out'

    Why wen I put in my password I get a message 'request timed out'

    Hi there Nechama B.,
    You may find the troubleshooting steps in the article below helpful.
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/ts3970
    -Griff W. 

  • I'm trying to redeem my itunes gift card and i get the message "session timed out".  does anyone know why i'm not able to redeem my card and why i get this message?

    i'm trying to redeem my itunes gift card and i get the message "session timed out."  does anyone know why i'm not able to redeem my card and why i get this message in stead?

    I've been having the same issues too, and thought it was just my outdated computer or account?!
    Every time I try to purchase a song, "session has timed out" shows up after I click "agree" to the terms!? I seem to be in the exact same scenario as 'SportsBarn' above:  Itunes support have replied repeatedly with the same "solutions" but nothing has helped or even been applicable.  I have an older laptop, 2005 Powerbook running OS X 10.4 Tiger so it's not compatible with the latest iTunes 10.5.2 which requires minimum OS X 10.5. I've been using the balance already in my iTunes account (from redeemed giftcards over the past few years) with no problem, until recently (my last successful purchase was October 2011). I wonder if it's the older OS or just a redemption glitch even with newer computers?

  • VPN client get connect but Request Timed out when ping

    Hi, I'm using the cisco 837 router as my VPN server. I get  connected using Cisco VPN Client Version 5. But when I ping the router  ip, i get request timed out. Here is my configuration :
    Building configuration...
    Current configuration : 3704 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname michael
    boot-start-marker
    boot-end-marker
    memory-size iomem 5
    no logging console
    enable secret 5 $1$pZLW$9RZ8afI8QdGRq0ssaEJVu0
    aaa new-model
    aaa authentication login default local
    aaa authentication login sdm_vpn_xauth_ml_1 local
    aaa authorization exec default local
    aaa authorization network sdm_vpn_group_ml_1 local
    aaa session-id common
    resource policy
    ip subnet-zero
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.1.1
    ip dhcp pool michael
       network 192.168.1.0 255.255.255.0
       default-router 192.168.1.1
       dns-server 202.134.0.155
    ip dhcp pool excluded-address
       host 192.168.1.4 255.255.255.0
       hardware-address 01c8.d719.957a.b9
    ip cef
    ip name-server 202.134.0.155
    ip name-server 203.130.193.74
    vpdn enable
    username michael privilege 15 secret 5 $1$ZJQu$KDigCvYWKkzuzdYHBEY7f.
    username danny privilege 10 secret 5 $1$BDs.$Ez0u9wY7ywiBzVd1ECX0N/
    crypto isakmp policy 1
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp xauth timeout 15
    crypto isakmp client configuration group michaelvpn
    key vpnpassword
    pool SDM_POOL_1
    acl 199
    netmask 255.255.255.0
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto dynamic-map SDM_DYNMAP_1 1
    set transform-set ESP-3DES-SHA
    crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_1
    crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_1
    crypto map SDM_CMAP_1 client configuration address respond
    crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1
    interface Ethernet0
    description $FW_INSIDE$
    ip address 192.168.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    ip tcp adjust-mss 1452
    hold-queue 100 out
    interface Ethernet2
    no ip address
    shutdown
    hold-queue 100 out
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    dsl operating-mode auto
    pvc 0/35
      pppoe-client dial-pool-number 1
    interface FastEthernet1
    duplex auto
    speed auto
    interface FastEthernet2
    duplex auto
    speed auto
    interface FastEthernet3
    duplex auto
    speed auto
    interface FastEthernet4
    duplex auto
    speed auto
    interface Virtual-PPP1
    no ip address
    interface Dialer1
    description $FW_OUTSIDE$
    mtu 1492
    ip address negotiated
    ip nat outside
    ip virtual-reassembly
    encapsulation ppp
    dialer pool 1
    ppp chap hostname ispusername
    ppp chap password 0 isppassword
    ppp pap sent-username ispusername password 0 isppassword
    crypto map SDM_CMAP_1
    ip local pool SDM_POOL_1 192.168.2.1 192.168.2.5
    ip classless
    ip route 0.0.0.0 0.0.0.0 Dialer1
    ip http server
    no ip http secure-server
    ip nat inside source static udp 192.168.1.0 1723 interface Dialer1 1723
    ip nat inside source static tcp 192.168.1.4 21 interface Dialer1 21
    ip nat inside source route-map SDM_RMAP_1 interface Dialer1 overload
    access-list 1 remark SDM_ACL Category=16
    access-list 1 permit 192.0.0.0 0.255.255.255
    access-list 102 remark SDM_ACL Category=2
    access-list 102 deny   ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
    access-list 102 permit ip 192.168.1.0 0.0.0.255 any
    access-list 199 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
    route-map SDM_RMAP_1 permit 1
    match ip address 102
    control-plane
    banner motd ^C
    Authorized Access Only
    UNAUTHORIZED ACCESS TO THIS DEVICE IS PROHIBITED
    You must have explicit permission to access this device.
    All activities performed on this device are logged.
    Any violations of access policy will result in disciplinary action.
    ^C
    line con 0
    no modem enable
    line aux 0
    line vty 0 4
    scheduler max-task-time 5000
    end
    Thank you, anny help will be appreciated.

    Thank you for your response, here is the debug :
    Log Buffer (4096 bytes):
      1 15:19:47.011: ISAKMP: set new node 856647599 to QM_IDLE     
    May  1 15:19:47.015: ISAKMP:(0:8:SW:1):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
         spi 2182802952, message ID = 856647599
    May  1 15:19:47.015: ISAKMP:(0:8:SW:1): seq. no 0xA3285B8A
    May  1 15:19:47.015: ISAKMP:(0:8:SW:1): sending packet to 120.168.1.24 my_port 4500 peer_port 52667 (R) QM_IDLE     
    May  1 15:19:47.019: ISAKMP:(0:8:SW:1):purging node 856647599
    May  1 15:19:47.019: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    May  1 15:19:47.019: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    May  1 15:19:49.979: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B4F274, count=0
    -Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:49.983: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B4F274, count=0
    -Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:55.127: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B51C44, count=0
    -Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:55.127: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B51C44, count=0
    -Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:58.383: ISAKMP (0:134217736): received packet from 120.168.1.24 dport 4500 sport 52667 Global (R) QM_IDLE     
    May  1 15:19:58.383: ISAKMP: set new node -1340288848 to QM_IDLE     
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1): processing HASH payload. message ID = -1340288848
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1): processing NOTIFY DPD/R_U_THERE protocol 1
         spi 0, message ID = -1340288848, sa = 81A7DCEC
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1):deleting node -1340288848 error FALSE reason "Informational (in) state 1"
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
    May  1 15:19:58.387: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    May  1 15:19:58.391: ISAKMP:(0:8:SW:1):DPD/R_U_THERE received from peer 120.168.1.24, sequence 0xA3285B8B
    May  1 15:19:58.391: ISAKMP: set new node -752454119 to QM_IDLE     
    May  1 15:19:58.395: ISAKMP:(0:8:SW:1):Sending NOTIFY DPD/R_U_THERE_ACK protocol 1
         spi 2182802952, message ID = -752454119
    May  1 15:19:58.395: ISAKMP:(0:8:SW:1): seq. no 0xA3285B8B
    May  1 15:19:58.395: ISAKMP:(0:8:SW:1): sending packet to 120.168.1.24 my_port 4500 peer_port 52667 (R) QM_IDLE     
    May  1 15:19:58.399: ISAKMP:(0:8:SW:1):purging node -752454119
    May  1 15:19:58.399: ISAKMP:(0:8:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MESG_KEEP_ALIVE
    May  1 15:19:58.399: ISAKMP:(0:8:SW:1):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE
    May  1 15:19:59.887: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81B51C44, count=0
    -Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:19:59.887: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81B51C44, count=0
    -Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:20:05.667: %SYS-2-BADSHARE: Bad refcount in pak_enqueue, ptr=81F84148, count=0
    -Traceback= 0x80137488 0x801DC350 0x801DDDA8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    May  1 15:20:05.667: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=81F84148, count=0
    -Traceback= 0x80137488 0x801D8830 0x801DDFD8 0x801E6860 0x807103F4 0x807F99F8 0x801E698C 0x8043FB10 0x8043FDC8 0x80D23CD0 0x80D24304 0x80D24400 0x8027B3C4 0x8027E9E0
    After searching thru the internet, I've found :
    CSCsb46264
    Symptoms: When a dialer interface is configured as an endpoint for a  IPSec+GRE tunnel, tracebacks with bad refcount may be generated.
    Conditions: This symptom is observed on a Cisco 837 when router-generated packets such as routing updates are being switched.
    Is that possible that the root of the problem was that ? Thank you.

  • Getting the messeage request timed out when trying to ping

    I can't ping but can be pinged. Done all the steps here: /t5/Hamachi/Ping-Request-Timed-out/td-p/121480 still no succes. I have made rules regarding hamachi in my firewall and i have ran diagonstics in hamachi, it says everything is allright, but still the pings doesn't work. Can be pinged though. I am running Win 10 64bit.  But one thing that have caught my interest is this, the hamachi network driver seems to not have a internet connection, but maybe this is normal? : https://gyazo.com/bfbe4e6bcf0b0caff44fdadabaaae865 Translation from swedish:IPv4 Connection: No Network Connection.IPv6 Connection: No Internet Connection. I hope someone out there has the answer to my question! Thanks in Advance!! Best Regards, FiskarN, AkA Elias!

    Hi S.Akmal,
    The request timed out also can caused by the remote computer no replayed, you can try to check the remote server whether it have some network issue, you also can connect this
    server to another server directly(just connect them with cable) then try the ping then can determine whether issue occur on this server.
    More information:
    Internet Control Message Protocol (ICMP) Basics
    https://support.microsoft.com/en-us/kb/170292
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • "Do you want to allow the following program to make changes to your computer?" I get this message in a box everytime I open firefox. I answer "Yes" but it continues. Please help.

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/856850]]</blockquote>
    "Do you want to allow the following program to make changes to your computer?". I get this message everytime I open Firefox. I select "Yes" and then the program opens. However, I continue to get this question everytime I open firefox. Please help.

    Can anyone answer my question?

  • Upgrade to iOS 4.3.3 getting a message "network timed out".

    I am running iOS 4.3.1 and trying to upgrade to iOS 4.3.3 and keep getting a message that says "network timed out". I had this same issue with upgrading to 4.3.1 but after disabling Firewall and anti-virsus software and moving to ethernet wired connection (not wireless) it worked. Not so with 4.3.3. I have tried at least 15 times at different times of the day/night.   APPLE is there a fix?

    Hi there, welcome to the site!
    This is usually a cause of a slower internet connection, that is why ethernet probably helped, it is faster than Wi-Fi. I would firstly turn your router off for 5 mins, then back on again, and try initializing the update. If not, maybe try changing the channel the router is broadcasting on. This can usually be done after entering 192.168.0.1 into your browser bar. Refer to your router documentation for more help.
    You can try reading through a similar thread which I have linked to below for more help.
    Discussion on Similar Issue
    Hope this helps,
    Regards,
    Nathan
    <Edited by Host>

  • I get this message gateway time out when i go to look at an item in ebay & when iam trying to do internet banking

    While in ebay looking at items i hit on a item to look at and some times i get this gateway time out message and it will not load the page

    HT2500 Error when deleting email: Apple Support Communities

  • Get this message:Request denied by WatchGuard HTTP proxy. Reason: one or more categories denied helper='WebBlocker.3' details='Streaming Media'

    I am able to access most websites but am receiving the following message on others (which are not loading). How do I fix this?
    Request denied by WatchGuard HTTP proxy.
    Reason: one or more categories denied helper='WebBlocker.3' details='Streaming Media'
    Method: GET
    Host: au.tv.yahoo.com
    Path: /

    I am able to access most websites but am receiving the following message on others (which are not loading). How do I fix this?
    Request denied by WatchGuard HTTP proxy.
    Reason: one or more categories denied helper='WebBlocker.3' details='Streaming Media'
    Method: GET
    Host: au.tv.yahoo.com
    Path: /

  • I am trying to update the iPhone 3GS to IOS5. At download i get an error - network timed out. Repeated tried several times. Is there an issue with the Apple Update Server or too much rush ? How do i update my phone using iTunes?

    I am using iPhone 3GS. It is currently updated to IOS4.3. I am trying to update the OS to IOS5 on iTunes. It downloads the software, but it gives an error - network timed out. I have tried this multiple times. But, the end result is same.
    Please help & advise as how I can upgrade the iPhone to IOS5.

    Temporarily turn off or disable your firewall and anti-virus software and try the download again.
    Stedman

  • EA6300 ICMP request reply delay "request timed out"

    Hi all,
    I bought recently a EA6300 smart wifi to provide support for intranet & internet. Router is connected by cat6 cable from a 24 port local lan switch. I am getting icpm delay message "request timed out" frequently. User can't work properly due to having this interruption over lan. I can't understand why it is happening. Could any expert pls help me regarding this issue.
    Rgds
    Zahir

    May I know where the computer is connected, Zahir? Is it behind the router or the switch? We have to properly look into what's causing this. What you mean by delay in ICMP, is it when you're pinging a website or the router IP Address? There are tons of reason for delay but with proper diagnostics, I'm pretty sure you'll get to the bottom of this. 
    By the way what kind of switch are you referring to? 
    You may check this for more info: SWITCH  

  • Yesterday my ipod touch 4g would connect and to wifi and i was able to go on safari and search etc. but last night at 11 pm it would say that it was connected to wifi but wouldn't connect to safari it would say request timed out

    it would say request timed out so i restored my ipod erased and reset it hoping it would delete the problem but it was still there it says that it is connected to wifi but will not launch safari and will bring up that message request timed out. itunes app store anything that uses internet/wifi will not work. it is not in airplane mode and wifi is on. i also forgot to mention this but it would also sometimes say that it is not connected to the internet even though i have 3 bars of wifi.

    The router itself will always be sending a signal to devices connected to it.  The router could not even be connected to your modem and it will still show that you have a connection on your device.  Check your router config, reset it, and if all fails, contact your internet service provider.
    BF

  • Twc app "request timed out"

    The TWC app doesn't work, it keeps showing the message "request timed out"

    I think this is a Time Warner Cable website problem, not an Apple problem.  After several contacts with Time Warner Cable tech help, I have now been told there is an on-going problem with the MyServices.TimeWarnerCable.com web page that the TWC TV app works in conjunction with.  The MyServices page either doesn't load or won't accept login passwords.  I have been told they are aware of the problem, but there is no estimate of when it will be resolved.  Hasn't worked for me for a couple of weeks now. 

  • Publishing to YouTube Failed: The request timed out.

    Why do I get "Publishing to YouTube Failed: The request timed out." when trying to load to YouTube. It doesn't happen all the time, just once in a while but it's been happening everytime for the past week!!
    I am using the pre-set drop down feature - Share to YouTube.
    Help! Thanks.

    Just trying the upload from the desktop: 'Uploading your video. 2616 minutes remaining.'
    Am also doing another export using H264 to see if that is quicker. It's only 15mins of footage.

  • Cisco Prime and WLC packet capture error - Request Timed Out

    Hello,
    We have a Cisco Prime installation (2.2.0) and a WLC (Cisco 5508)
    I’ve been trying to test the wireless packet capture function, but have now run into problems, a quick rundown of my actions so far:
    Selected a wireless access point in Prime and clicked ‘Packet Capture’
    Did a packet capture saving to the PI, the capture worked fine
    Could not find any way to delete the packet capture
    Selected a wireless access point in Prime and clicked ‘Packet Capture’
    Did a packet capture saving to an FTP server, the capture worked fine
    The 1st capture had finished (10 minute capture) before testing the second
    The 2nd capture has also finished and saved the files to the FTP server as specified
    Now though I cannot capture from any access point as when I click ‘Packet Capture’ I get the error:
    “Request Timed out. Error in getting data from server.”
    The error is ‘instant’ as in no delay indicating something actually timing out.
    So the 2 problems I have are:
    How do I fix the ‘request timed out’ error above
    How do I delete old packet captures from the PI
    I hope someone can help as I can’t find any info on either of the problems.
    Cheers
    Adrian

    I think I've solved (2) by deleting the files from the FTP directory on the prime box through SSH.
    So I'm now just stuck on the timed out error.

Maybe you are looking for

  • Issue in automatic delivery creation

    Hello, This is to reframe the issue again and give you some more details on this issue – As per SAP standard we have configured our salers order for immediate delivery creation with a default delivery block – XX. Hence as per config whenever we creat

  • Apple tv2 not streaming from home library

    Trying to watch movies from my itunes library and nothing will stream to my Apple tv. No video will stream at all only music. I've tried to itunes logout and login fix and that won't work. I keep getting an error after about 10 seconds of video. Plea

  • Webdynpro abap - no rendering

    I am working in ECC6, with abap rel 7.0 and basis rel 7.0 When I run a WDA application, it does not render properly.  Only the text is diplayed on the screen. There are no lines, no icons, no colors.  The buttons are invisible.  You can't see them bu

  • Problem printing cd jewel case inserts

    Problem printing cd jewel case inserts. Album art prints as a black box instead of in color as it should. Any suggestions?

  • Unable to launch Admin Console

    My co-worker is a full administrator (as am I)- she cannot launch the admin console. DCOM is configured properly. Verified .Net framework is 4.5.1 just like mine. Any suggestions???????????? Screen shot below: We have the same Roles & similar scopes.