I get this message when i click on iChat to sign on
"Could not connect to AIM: A connection already exists from your computer’s IP address. Only one connection per IP address is allowed."
I'm lost, please help.
Ok.
iChat is an AIM Client.
@mac names are recognized as AIM Screen Names
The AIM servers will remember when and where you logged into them with an AIM valid name.
So any AIM client on any computer that is logged in will get the text message warning if it thinks you are logged in.
This could be from another application on the same computer such as AdiumX or ProteusX or even AIM for Mac on your Mac or AIM for PC on a PC.
Mostly it is simply forgetting to log out of Home or work before transferring computers
Sometimes though if you lost the connection to the server suddenly the flag setting at the AIM server will say you are logged in when you are not.
To cure the last type 1 in response to the message.
This will log the other instance out of the AIM servers.
Then Quit iChat and restart it and the message should not appear.
The restart will also clear iChat of not logging out properly if the connection was previously lost.
8:28 PM Friday; May 16, 2008
Similar Messages
-
I keep getting this message when I click on the Mozilla icon.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
Go to www.macupdate.com and download Flip4Mac and Windows Media Player for Mac. With these installed, you should be able to see most videos on most websites. Oh - and you can get flash player there too while you're at it.
-
Anyone else getting this message when downloading updates?
"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." I used my same Apple ID to download Yosemite and now I get this message when I click the UPDATE button for iMovie, Keynote, Pages, and Numbers. Anyone have any idea what (or why) I'm getting this message. I get it ONLY on the Apps Store site. My Apple ID works fine in all other areas.
As I understand it, you would need to go back before Mavericks. Such as, wipe your Mac and install a clone of your old Snow Leopard installation. Make sure the old iWork apps were installed and upgrade to Mavericks.
What occurred when I upgraded from Mt Lion to Mavericks, is the MAS detected my installed iWork '09 apps, alerted me to available updates and presented the Mavericks versions of iWork in the Purchases pane for me to accept into my account. After I accepted them into my account, it then proceeded to install the Mavericks versions in the Apps folder and at the same time sequestered my previously installed iWork '09 apps in a folder in the Apps folder named iWork '09. Later, when I upgraded to OS X Yosemite, the MAS alerted me to upgrades for the Mavericks iWork apps and updated them to the Yosemite versions. -
# Question
I get this message when I try to open my google shared docs this week: "A browser error has occurred. Please hold the Shift key and click the Refresh button to try again." - but that click/refresh doesn't work either. What's up?The backend end is in serious pain....on many levels.
Try this: Connection Problems Form -
I keep getting this error when I click on the link inviting me to join a Photo Stream: "An error occurred while joining the Photo Stream. Please try again later."
I was the one who set up the Photo Stream and sent the link to myself. I called Apple and they said I did everything right and the server must be temporarily down, but it has been the same for the better part of a day.None of the fixes above worked for me. Continued getting the "try again" error message.
Tryed a bunch of things, such as going directly to icloud on Safari to open the mail message, no luck.
Tryed the following;
Went to iCloud and logged in via Safari, clicked on my account name in top right corner, selected "Advanced" on drop down menu, and selected "Reset Photo Stream".
Turned off Photo Stream on all devices and iPhoto.
Turned on Shared Photo Stream option on Mac iCloud preferences.
Tried the "Join This Photo Stream" button in my Mac Mail app .me account again.
Still got the error message.
Forwarded the original mail message to a yahoo account, selected "Join this Photo Stream" in the yahoo account mail (still in my Mac Mail app), and lo and behold, iPhoto opened and displayed the photos.
Could be this would have worked right from the start.
Oh yea, still get the "try again" message if I click on the Photo Stream button in my .me account. -
"This disc does not use the GUID Partition Table Scheme. Use Disc Utility to change the partition scheme". I keep getting this message when I try to install OSX Lion so that I can upgrade my 17" MacBookPro to move to iCloud. My harddrive was replaced last year by Apple because of a fault by the manufacturer and I think this is the cause of the problem. What can I do so that I don't lose my content.
When you click the partion tab. There is option on the bottom of the window. Click on that there there are these options.
-
The Web-Based Email plugin has crashed. I get this message when trying to paste simple text into an email document. I have updated plugins and have run out of options. If I use another browser I have no problem. Please advise.
UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede. -
The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?
Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again. -
I have a windows 7 64x SP1.
Every time I install iTunes 12 I get this message when I try to open it:"This copy of iTunes is damaged and it has not been correctly installed. Please, install iTunes again.(-42404)".
The instalation process runs smoothly without any error message and iTunes has been installed in my computer before. The problem started with the update no. 12. Any idea what's going on? Thank youif itunes will not run, you probably have mangled windows badly
one feature of windows 8 is the refresh that saves libraries,
because you are using windows 7, you will need to backup all files to another storage device -
I get this message when i try to sync and download my iphone, ITUNES was unable to load data class information from sync services, reconnect or try again later. this has happened twice. i have not downloaded by phone in several months. the first time i got this message i did not understand i and left my phone plug in for 12 hrs and it never did anything. today. when i got the message i just unplugged it.
helphttp://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US
-
I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.
This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plug-in | Supported cameras
So you can upgrade to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
And here is a great video tutorial on how to use the converter.
https://www.youtube.com/watch?v=0bqGovpuihw
Gene -
after installing maverick i get this message when i try to open itunes:Unmark the 32bits modus-but i have unmarked it several times!The new iTunes requires 64bits modus so what shall i do?
I upgraded my 2007 iMac (20") to Maverick. Should never have done this! Lost mail, lost my mail archive, lost numerous programs/applications, lost all my installed hardware, spend 4 days on getting it running again with the (supreme) help of Apple Care. However it should not have happened at all!
iMac Computers with less than 4Gb of internal memory (as explained by Apple Care), or less than (estimated) 150Gb of free disc-space should not upgrade! Simple as that and the App Store should warn you about that and not simply let you pick up your free copy of Maverick! -
I tried to delete my old version of firefox because it wouldn't open certain websites that safari would, when I download new firefox I keep getting this message when I try to open
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I get this message when syncing my Ipod touch "itunes can not back up the ipod because a session could not be started" any ideas?
Have you looked at the previous posts on the right side of this page under the heading "More Like This" with your same problem?
-
I am getting this message when I start Firefox 'Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.'
How do i resolve it and get firefox started?Please see this article: http://kb.mozillazine.org/Error_loading_secure_sites
Maybe you are looking for
-
Live Cycle for Dummies/Begginers???
Hello All; I have been thrust into a new position within my organization. My new role is to learn everything I can about Live Cycle ES designer for custom forms, etc. I have never worked with Live Cycle. Google, Amazon and other searches for dummy
-
How to Write an Routine in APD to make Records blank i.e. 'X'
Hai, I have created an APD in BW 3.5, I need to write a routine to update records which are having 'X' in R/3 Side. So how to write routine in Transformations? Please help me ASAP. Thanks, Ramesh
-
How to prevent MIGO when source inspection lot is either open or rejected.
Hi How to prevent doiMIGO when source inspection lot for the vendor/material is open or the source inspection lot is rejected.
-
Idoc file name restricted to 100 characters
The file name (include Directory Path) for Idocs seems limited to 100 characters (it truncates). Can anyone confirm this? Is there a workaround (other than changing to a shorter path)? Thanks, Matt.
-
Aaa authentication using tacacs+ for LAP
WIth Autonomous AP, you can configure aaa authtentication using Tacacs+. In lightweight AP, do u have similar function where u authenticate using tacacs+ when u telnet/ssh into the LAP after it is registered to the WLC? Rgds Eng Wee