I get three blank frames when I try to export

I'm new to motion and I have a question.
I'm working on an intro to a dvd menu, and whenever I try to export it, I get three black frames in my project. It happens at the same time, every time I export it. Specifically, it's right in the middle of a camera dolly. All that's happening is the camera is moving closer to one still image, while also moving to the left and right.
For some reason I don't get this problem when I play the clip in motion.

My OS is 10.8.5 and I am assuming that the reader I was using before was the one released just prior to 11.0.04 because I was pretty consistent about updating when a new release came out.

Similar Messages

  • I am getting an error message when i try to export "Not enough memory" what do it do?

    I am getting an error message when i try to export "Not enough memory" what do it do?

    Your 400GB is not what I was speaking of. I was not speaking of disk space. I was speaking of memory.
    The memory in your computer needs to be 8GB or more, and you must have a 64 bit operating system (which can still happen even if your computer is less than 12 months old). What operating system do you have? Is it 32bits or 64bits?

  • I keep getting a Error -50 when i try to export my videos.

    hey everyone this is a really big pain and I looked it up and it said that it is possible there is a corrupt file but there is nothing wrong ive checked the videos even play smoothly in FCPX. A couple of my Videos are about an hour and the rest are anywhere from 10 to 15 minutes. they get about half way through exporting and it pops up with the error - 50. Please help. Thanks
    oh i also tried sending everything through compressor and that failed also.

    Switch off background rendering. Trash your project render files. Don't re-render. Export.

  • When I try to export from iMovie '11 I get repeated messages that the project is too big. Why? Is there a workaround? (I have already cut a 40-minute movie into three chunks...)

    When I try to export from iMovie '11 I get repeated messages that the project is too big. Why? Is there a workaround? (I have already cut a 40-minute movie into three chunks... the first exported to iDVD ok, but the next one of 15 minutes balked for the same reason -- too long...)

    I wish I had a mac :-P 
    Sadly, this is Windows machine so I dont have a non-iOS version of iMovie.  I have 2 ideas left.  The first is xfering the project to my iPhone 4 and trying to export it there (if that works, awesome but geez apple the iPad 2 is way more powerful than the iphone 4.. youd think I wouldnt even have to attempt this).  The 2nd idea is to start at the end of my movie and delete clips and sounds backwards, trying to export each time to find whatever clip is causing the issue (when the movie was 5 minutes it mixed no probem, so I only need to go that far).
    Wish me luck? 
    Also, is anyone else besides me and the 5 dudes in the other threads having this issue??  Speak up, guys - Apple cant a fix a problem they dont know about.

  • I am getting an error message when I try to combine three PDF files"Your PDF conversion request fail

    I am getting an error message when I try to combine three PDF files "Your PDF conversion request failed. Try again later" 
    Thank you,
    Lori Jans

    Hi,
    Please let me know if your files are big. complex, or image files?
    If you sill have the same error message then please share your files with us so that we can look at them using below site: 
    https://adobeformscentral.com/?f=qJiclooYWGGNFtWfj8g3wg#
    Thank you.
    Hisami

  • Imessage wont upload it just turns blank and when i try to turn it off in settings it doesnt let actually me get into messages it just freezes

    i have an iPod that is 5th gen and when i try to get into it it doesn't do anything its blank and when i try to turn it off in settings it doesn't do anything it doesn't even let me into the messages in settings my screen just freezes! PLZ HELP!!!!!

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I am directed to a blank page when I try to download Whatsapp. How can I get it?

    I am directed to a blank page when I try to download Whatsapp. How can I get it?
    Ive tried going to the App Store direct and also tried using the link on the Whatsapp site. Same problem each time - a blank page.

    Whatsapp is a phone app, however, look at these links:
    Install WhatsApp On iPad And iPod touch
    http://tinyurl.com/lp6tsud
    Install WhatsApp to the iPad
    http://ipadwhatsapp.com/
     Cheers, Tom 

  • I get the following message when i try to open ALL my documents : frozen panes and split panes are not supported and were removed. my documents are blank

    i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!

    Hi Louisa,
    louisa_16_za wrote:
    i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
    Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
    If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
    If your marks depend upon a professor who uses Excel, go with the flow.
    http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
    Regards,
    Ian

  • I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

    I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?

    There are several possible causes for the Black Screen issue
    *1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    *2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    *3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    *4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    *5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Regards
    TD

  • My email isn't working on my ipad I just get a blank screen when I tap on mail

         My e-mail isn't working on my iPad2 I just get a blank screen when I tap the mail icon. I had e-mail for the first 2 days I had my iPad then it disappeared I don't know what happened.                          

    try to quit the mail application in the multitasking feature. if this does not work try to reset the device manualy by pressing the home and power button until it powers off and restarts with the apple logo.

  • Mail   I inherited an iMac, OS X 20.6.8. The Mail system is corrupted.  I cannot close mail formats that opened to be written and sent.  I just get an unpleasant noise when I try to close these.  Also, I don't know what the outgoing mail link should be.

    RE: Mail  
    I inherited an iMac, OS X 10.6.8. The Mail system is corrupted.  I cannot close blank mail formats that opened to be written and sent.  I just get an unpleasant noise when I try to close these.  Also, I don't know what the outgoing mail link should be.
    Please help!
    M. Levine

    Quit Mail, Trash this file...
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop for now...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • I keep getting unknown error Ox80092013 when I try to log in to itunes

    I keep getting unknown error Ox80092013 when I try to log in via desktop (MS Windows).  Since this started, I can't sync my ipod, iphone, or ipad.  How do i fix this?

    Hi, ddstomoff. 
    Normally this error means a secure connection to the iTunes Store has failed.  Try the steps in the article below as it may help resolve this issue. 
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    If the issue persists, further troubleshooting may need to be processed.  Be sure to disable any security software installed during troubleshooting.  Also, test the results after every troubleshooting step processed. 
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Regards,
    Jason H. 

  • I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings, and although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.

    I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings which appear to be correct. Although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.

    When bouncing, do you use the Key Command or the button on the Output Channel Strip? The Key Command only bounces from the Stereo Output. The bounce button bounces from the Channel Strip it is on. So if you want to bounce out outputs 3-4 or higher, don't use the key command, but the button.
    The strange thing here is that Logic, when it bounces an MP3, first bounces an AIFF, which at the end of the bounce process is being converted to MP3, so I can't imagine how you can get a silent AIFF and a normal MP3.
    How have you listened to those bounces? iTunes? Quicklook? Quicktime?

  • I get an error 9 when I try to restore my iPhone 4s

    The title pretty much sums it up, but a little background.
    While reading a kindle book my 4s shut itself off. It then started, went to the apple screen, cut to white screen, and shut off again.  It repeated this in an unending loop.
    Since I had not backed up my Iphone since January, I was frantic, because I had over 650 pictures on there. Anyway, I tried charging it and after a while it started working again.  Miracle of Miracles! So I instantly uploaded all the pictures onto my laptop, but was unable to back the phone up again.  But it was late and I figured I'd try it again later.
    The next day, during normal activities such as reading a book, playing a game, or even swiping on the home screen, the phone would randomly cut off, restart, and then be fine. 
    Finally it cut off again, and went into the dreaded cycle.
    Even though I hadn't backed it up fully, I decided to try to restore it. It was the only option I could think of. (I've already ordered a new phone, but it won't be here for 2 weeks, so I'm trying to fix this one temporarily to avoid getting a trac-phone.)
    Initially I got a high numbered error message when I tried to restore the phone. So I updated my computers OS and Itunes.  Then I tried again.
    Now I"m getting an Error 9 message.  After looking up the troubleshooting for that message, I don't know what to do.  I don't have any periphials on my computer: just the power cable and the usb connected to the phone.
    Does anyone have any ideas, or am I just the last guy holding the bag and out of luck here?
    TL:DR?
    I have to restore my 4S and I'm getting an Error 9 when I try. Nothing extra is attached to my computer, and the OS and Ituns is up to date.
    Thank you all in advanced!

    Hi there,
    Do you have icloud account? You need firstly turn off find my iphone (by go to icloud.com -->sign in --> go to "Find my iphone" and erase your iphone in it). And then you restore your iphone with DFU mode.
    When you erase your Find my iphone and if you can not restore, your iphone has a problem with hardware.
    Some infos can help you.
    Kind regards,

  • I'm getting the rainbow wheel when I try tp pen in internet page (Safari). The page half loads then appears to freeze with the rianbow wheel.  I get the same result when I try to stream a movie from NETFLIX.  Freezes up rather than plays (after loading).

    I get the rainbow wheel when I try to open an internet page. It loads halfway, then freezes, with the rainbow wheel whirring around. Smae thing happens when I try to stream a movie on Netflix.  The movie loads, then the wheel shows up and the screen freezes.  Same thing when I try a DVD, it takes the disc, but won't play when I hit on PLAY.
    I am repair permissions, and all that I can do, but I am a novice.  Any help would be greatly appreciated because I spend big bucks and drive 40 miles to get Apple help.
    Sharon in the woods of Idaho

    Welcome to Apple Support Communities.
    If your profile info is up to date, you probably have a 2006 or 2007 MacBook with a CoreDuo or Core2Duo.
    It probably came with 512MB or 1GB RAM memory and a 60, 80, or 120GB hard drive.
    You're still running OS X Tiger, 10.4.
    Your DVD drive may be dirty or wearing out.
    For specifics about your computer, click on the  Apple Logo in the menu bar, then About This Mac, and More Info... to find details.)
    You may be running short of hard disk space. You should have at least 10% free, or 10 to 15GB free for best performance. Less than that, and your hard disk is spending lots of time searching for places to store data.
    Complex web pages and sites like Facebook and Twitter, and pages using Adobe Flash, and high-bandwidth applications like video streaming from NetFlix can all cause your computer to run slowly, and the fan to run at high speed, because the processor is working hard. Conversely, email is not terribly resource-intensive, and probably still works pretty well.
    Several things can each provide a small performance increase (listed in no particular order):
    Adding more RAM memory. Upgrade to 2Gb to give your programs a bit of 'breathing room', especially if you are running more than one program at a time.
    Erasing the hard drive and reinstalling the current operating system and programs from scratch. This erases all your existing programs and data. Unless you have backups and program discs, you lose everything currently stored on it.
    Installing a higher capacity, faster hard disk, say 250GB or 320GB will give your programs and data more space, and perhaps faster access if you replace the factory 5400rpm drive with a 7200 rpm drive. If your current hard disk is nearly full (less than 10% free space), the drive has to 'thrash' to free space to store information. 
    Upgrading the operating system to OS X 10.5 Leopard or OS X 10.6 Snow Leopard. Both are discontinued OS X versions, still available to order directly from Apple, but not likely found on a store shelf any longer. An upgrade to OS X 10.7 Lion might not be possible for your MacBook (details here: http://www.apple.com/macosx/how-to-buy/), and Lion would likely cause a further slowdown, because honestly, Lion is optimized for newer, faster dual-core or quad-core computers with fast video chipsets and 4GB or more of RAM.
    A faster internet connection, for example: I switched internet providers to get a 3.0Mb DSL connection (up from a 512Mb connection) for an extra $10 per month, and saw downloads and internet browsing speeds increase dramatically.  With the slower connection, it was not possible to watch video.
    Will all of these upgrades together get you close to the performance of the latest MacBook Air or MacBook Pros? NO!
    Ultimately, you have a 4- or 5-year-old computer, and spending up to several hundred dollars for upgrades might not be a worthwhile investment for you, versus applying that much money toward the cost of a new(er) Mac, and perhaps passing your MacBook on to a friend, child, or grandchild who needs mainly email capability.
    If a brand new Apple is not in the budget, consider a refurbished Mac from the Apple Store online. These are reliable computers from 'last year's models' and have the same 1-year Applecare warranty as a brand new model, and often sell at a discount of 10 to 30 percent of the price when the model was introduced.
    I'm using a mid-2007 MacBook, purchased as a refurb from Apple in late 2007. It came with 1GB RAM, a 120GB 5400 rpm hard drive, and OS X 10.4 Tiger. Over the years, I've upgraded it twice. Firs to 2GB, then to 4GB RAM, to a 320GB drive, then to a 500GB 7200 rpm hard drive, and to OS X 10.5 Leopard, and then to OS X 10.6 Snow Leopard. Rather than one more round of upgrades to OS X 10.7 Lion, I'm saving for a newer MacBook Pro or MacBook Air at some time in the future.

Maybe you are looking for