I get two different error messages tring to install aas

the first message is the standard Error 2 message apple application support not found. I try to install it as a stand alone as others have been told to do. I get the message A later version of AAS is installed on your computer. that's all it says. I've run searches and looked everywhere, uninstalled and reinstalled everything. Help please!

This web site might answer all of your Time machine questions:
http://pondini.org/OSX/Home.html
Ciao.

Similar Messages

IPod Touch stuck in restore. I keep getting two different error messages.

Forgive me if you've seen this question before and if it's already been answered.
I recently purchased an iPod Touch. It turns on but, you can barely see it. The Apple logo appears and then it goes straight to the restore screen. I updated my iTunes and everything and when I go to restore and update my Touch, I get two different error messages. The first one I get states "Error Message (21)." Now, when I go to unplug the USB cord and plug it back into my Touch, I hold down the Home Key. When I go back into iTunes, it starts the update, it now goes into "Preparing to restore". That's when I get another error message with the numbers "2009".
I went to the Support page and tried the troubleshooting steps but, none have been successful.
Has anyone had this problem? And if so, what was the solution?
Any suggestions/advice would be greatly appreciated. Thanks.
**Also, I never used a jailbreak. The only reason why I mention this is because no matter how high or low I search the net...every one comes up with a "jailbreak" solution. I don't even know how to go about doing that and I'm not gonna even trust myself trying either.
Message was edited by: asher11
Message was edited by: asher11

Make sure the iPod is directly connected to a high-speed USB2 port on the Mac, using the cable that came with it. Also try disconnecting all other USB devices, other than the keyboard and mouse.
Try restoring the iPod touch on another computer.
If the iPod does not restore from another computer, request repair online, make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
https://selfsolve.apple.com/GetWarranty.do
http://www.apple.com/retail/geniusbar/
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
-Jason

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams stop

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

When I try to open iTunes, I get this error message: Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. I get a different error message if I try to uninstall it.

When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.

Any suggestions please?

Get a certificate error message during Application Install

I can open Adobe Story online. When I click on the Project dropdown menu and chose the option to install the desktop version, it does install the software, but then it tries ot open it and I get the following message:
Sorry, an error has occurred.
The application cannot be installed due to a certificate problem. The
certificate does not match the installed application certificate, does not
support applciation upgrades, or is invalid. Please contact the
application author.
When I first tried to install the desktop application I was given instructions to go to my browser (safari) and click on Security > Manage Website Settings
Then I had to select store.adobe.com and in te Allow Drop Down menu select "Run in Safe Mode".
I've done all that. But the application still hangs up during loading.
How do I fix the certificate problem?

It seems like that an older version of Adobe Story is installed on your system.
To resolve this issue, you will have to first uninstall that version.
If you are on Windows machine, you can do it through Control Panel.
If you are on Mac, then please make sure that you remove the 'Adobe Story' app from Trash too. Also please do a search for 'Adobe Story' in spotlight to make sure that it is not present in any other drive of your Mac. If present, then remove that one too.
After removing the older version you should be to install the latest version without any issue.

Can't sync, keep getting different error messages

Had to restore my iPod Classic and now iTunes won't sync. It syncs for a while but then I get an error message. I stop it, start over again and get a different error message. First it says it can't read the folder, then it can't read the file, then it gets an "unknown error (-81)"... what the heck is going on here

1. 10.6.1.7
2. I'm afraid to plug it back in again to check, but it said that I had the latest version installed...does that help?
3. Yes I've tried that, same thing happens.
Last week after numerous attempts I was able to get it to sync about 3400 songs (out of 22000) before it crashed, today I got up to around 4300 and a new Windows error "Delayed Write Failure" in addition to a couple different iTunes errors.

I get two JAN20SD errors on login

I get two JAN20SD error messages every time I log onto my HP TouchSmart 600:
1. Can't get uart state
2. register device notification error
What can I do to resolve this issue?
In addition the JAN20SD takes up 25% of my resources all of the time. Is this normal?
Thanks,
Mark

Try HP website for OSD and Button driver for your model pc. A search request should provide a link to hp.com. Download and save to a location where you can find it then reinstall it.
It is unfortunate that HP does not usually actively participate in their own forum which should be a critical part of creating a repeat customer base for purchasing and product support. It would only take a minute to put the correct link and response to this particular problem. Maybe even a post explaining why this error happens.

I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon

[svn:bz-trunk] 14330: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14330
Revision: 14330
Author:   [email protected]
Date:     2010-02-22 10:03:03 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
QA: no
Doc: no
checkin test : pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

[svn:bz-trunk] 14341: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14341
Revision: 14341
Author:   [email protected]
Date:     2010-02-22 13:19:46 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java
    blazeds/trunk/modules/core/src/flex/messaging/util/ClassUtil.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

I have placed a different sim card in old iphone 3gs and now cannot send text nor make calls. I get the following error message "error in pdp authentication" I am in italy and old cip vas vodafone. new cip is tim

As stated I live in italy, a year ago have purchased an iphone 3gs from vodafone company. I now have purchased an Iphone 4 and have moved that cip in the new phone.
In the old Iphone 3gs I have placed another cip from a different company here in Italy TIM and now cannot make calls nor send text messages since I get the following error message "error in pdp authentication". Can anyone help me in understanding what do I need to do??
Thank you
Marco

Hello Notahappycamper1962
Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
I look forward to hearing from you and getting this addressed.
JoeL_VZW
Follow us on Twitter @VZWSupport

Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

Hi Tom,
Looks like we have problem here as we see another blank post from you here. It's probably something to do with your email. Let me send you a PM with my email address and we can communicate that way.
Thanks,
Kevin

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats)?

When I try to make smaller PDF's I get an ''unknown error''message,(Win7 on Acer laptop, but not on my HP Desktop with Win Xp (two separate Acrobats
Happens isnce a week or four...

https://www.dropbox.com/s/h20hiaxiuynz6z5/Blendle%20week%2051%202014.pdf?dl=0
https://www.dropbox.com/s/eohk8an2rozwe5w/NatGeo2015.pdf?dl=0
Until a few weeks ago no problems with this kind of files

Why am I getting two different conversations when the same person txts me and sends me an I message? I thought they should be in the same conversation?

Why am I getting two different conversations when the same person txts me and sends me an I message? I thought they should be in the same conversation?

I'm experiencing something similar. My conversations are kept together but if the screen is opened to a conversation and I receive a text from that person it doesn't show up on the screen. The message alert in the upper corner indicates a new text but I have to back out of the screen and go back in to read it.

Different error messages from different env while fetching ref cursor

Hi 
I have a package where i need to call one of the procedure.I this 
procedure i am returning a refcursor as out parameter.Before returning refcursor i 
am doing i am checking a condition if it is satisfied then I am saying return or else 
it will proceed and refcursor is assigned for out parameter.So i am speakig about 
the condition where i am exiting from procedure before refcursor parameter is 
assigned .And later i am tring to fetch from that cursor .So i am getting different 
kinds of errors which i described as follows 
 
 
So If execute that procedure from sqlplus uing 
 
 
var m ref cursor 
DECLARE 
Y NUMBER; 
Z NUMBER; 
A NUMBER; 
BEGIN 
A:=campa.dtl_inq(2,100070875,'R',Y,Z,:M); 
END; 
 
Then if say 
Print m 
It gives 
 
ORA-24338: statement handle not executed 
 
And if i execute this using vb application 
 
I am getting following error 
 
ORA-01023: Cursor context not found (Invalid cursor number) 
 
So i am serching the reason for different errors 
 
Regards 
vamsi krishna 

The error depends on exactly what OCI calls the client software makes in accessing this invalid (null) ref cursor variable.
It would seem that SQL*Plus makes different calls than what your code and Visual Basic does - thus the different error messages returned by the two applications.

I get two different error messages tring to install aas

Similar Messages

Maybe you are looking for