I get two error which may or may not be related?
When executing diadem 8.10, error pops up and states something like: Error, please see the report file for more info. I look at the report file and it has the following error code, 80040200.
Next problem. So this diadem (same as above) was once working. It has a short cut on the desktop. When clicking on the short cut, the VBS autosequence is incorrect error displays.
Jose
Hi Jose,
I find it very significant and ominous that you were unable to register a DLL on your computer. Either that DLL file became corrupt, or you're missing administrative privileges, or your operating system is wounded somehow, or something.
Here's the DLL file from my working DIAdem 8.1-- see if you can register that one. If not, I'd ask your system administrator for help assessing the health of the operating system. Or you could try uninstalling DIAdem 8.1 and reinstalling it, but that's a low percentage try.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
vbscript.zip 217 KB
Similar Messages
-
The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
NinaMany InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning. -
I recently purchased an external hard drive to back up my iMovies. When I try to open the movies on the backup I get a message "you may not have permission to modify that folder" How do I change permissions on the backup?
Hi
One Must NEVER move or alter any folders named
• iMovie Event's - or -
• iMovie Projects - or - alike
on DESKTOP/FINDER - Ever ! - ONLY Within the iMovie Program ! else all connections are broken and hard to impossibly to mend !
but rather do as described here under
Moving Event's and Project's
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W -
I am trying to print a fillable form - - an application for a Chinese visa. It will not print and I get two error messages: "document could not be printed" and "there were no pages selected to print." The latter is not true. Won't print at all, the page I am on, nor any series of pages inserted.
Am using a MAC desktop and a Cannon PIXMA MX922 printer.
I need to print this form now that it is filled out? What can I do?Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working. -
Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.
Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.
-
I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
I can get into safe mode. But no regular startup.
I tried disabling bluetooth, thinking that might be related. It didn't help.
I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
But I still get hung on the blue screen when trying a normal startup.
All help would be appreciated.Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
http://support.apple.com/kb/HT1436
http://support.apple.com/kb/HT1939
http://support.apple.com/kb/HT1767
http://support.apple.com/kb/HT1379
I hope this solves your problem. -
When I try to open editor I get an error message that I am not connected to the internet (which I am) or my computer clock is set incorrectly (which it is not).
This is normally to do with activation. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Serial number issues or activating my product
3. Click on the blue button: Still need help? Contact us – then click the button marked “chat now”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Ensure you have your serial number.
Click here to get help now Contact Customer Care -
Getting two errors in ZenWorks Inventory...
Hello all,
I'm getting two errors on just about every one of my workstation
inventories.
I am running Zen 7 SP1 IR4 HP2 and it is a brand new installation. These
errors are from the first workstation scanned after the new install.
They errors are
Scanner (Warning) : 027: Unable to read sequence number from the Workstation
Object.
Scanner (Information) : 002: Unable to register to DMI service layer.
L checked some old posts and found a reference from Shaun Pond to look at
Listser on the server and this is what I got
[12/28/09 11:51:13.732] List Services Utility: Unable to connect to service
manager. Restart ZENWorksInvService
'ZENWorksInvService/null' could not be listed.
Any ideas??
Thanks in advance.
Delon E. Weuve
Senior Network Engineer
Office of Auditor of State
State of Iowa
United States of AmericaDelon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Hi! I want to develop an extension for Firefox.
My problem is that none of the tutorials and sample which i find online work for Firefox 3.6.13 (on Mac).
When dragging an XPI file (even pre-made), i'm always getting some error, which is not properly readable, but it says "not found" and an "ok" button.
Please send me some info on how to make a "helloworld" extension installable in Firefox 3.6.13.
My email is [email protected] Thank you very much!You can try to install the extension via File > Open File
A forum better suited for such questions is this forum:
*http://forums.mozillazine.org/viewforum.php?f=19 - mozillaZine Extension Development forum
You need to register on the MozillaZine forum site in order to post at that forum. -
Hello,
When I try to save a form as “Reader Extended PDF” in Acrobat Pro, I get an error message “This document could not be reader enabled”.
The steps I’m following are described below:
1. Insert electronic signatures
- In Tasks, click on “Add New Field -> Digital Signature”.
- Move the square to the place where you want to put the signature and click.
- Fill in the “field name” with the name of the person who has to sign here.
- When it is done, click anywhere on the screen.
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
2. Save the Form
- In Tasks, click on “Close Form editing”.
- Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
- Fill in the file name and click on “Save”.
I am using Adobe Acrobat Pro 10.0.0 on a W7 workstation
Here's a screenshot of the problem.
Thanks a lot.
GaelRead the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software -
My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice. -
Why do I get the error message "iTunes Match could not be updated because you were disconnected from the network during processing." I'm on the internet during all of this. What disconnect is the message referring to? Itunes is frozen now. I keep clicking OK but it just comes back with no action.
Hello FredJay,
Thank you for contacting Apple Support Communities.
iTunes Match needs a network connection to work, either Wi-Fi, cellular or wired. See the following:
Make sure you have an active Internet connection
Be sure your computer or device has an active Internet connection by loading a webpage using Safari or another web browser.
On an iOS device with cellular support, if you are not on a Wi-Fi network, try enabling 3G cellular data1 for iTunes Match.
For iOS 6, tap Settings > iTunes & App Stores > Use Cellular Data > On
For iOS 5.1.1 or earlier, tap Settings > iTunes & App Store > Use Cellular Data > On
1Fees may be associated with downloading over cellular networks; contact your wireless carrier for details.
From:
iTunes Store: Troubleshooting iTunes Match
http://support.apple.com/kb/TS4054
Regards,
Jeff D. -
Problem with Home Sharing. Getting the error "The Requested URL was not Found on this Server"
I recently purchased an iPhone 5. As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing. My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake. All of these videos work fine on all devices in my home except my new iPhone 5. When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
Does anyone have any ideas as to what's going on?Can you see if you can view index page from a browser on iPhone.
Have you seen live streams working from a different computer...
if not then check if a proper crossdomain.xml file in its place(webroot folder). -
Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
When downloading itunes software i get an error message:'apple apllication support not found"
when downloading itunes software i get an error message:'apple application support not found'...error2 (windows error2)
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application, won't install normally.
tt2
Maybe you are looking for
-
I need to know how to open a photo and make layers
My photoshop version is Adobe Photoshop CS3 for Windows Vista Business. I just want to know how to make layers using photos. I want to place a silloetted photo onto a backdrop of a lobby of a hotel, (I have the photo from the lobby). Can you give me
-
Insufficient Bandwidth driving me crazy!
I've read and followed the suggestions in all the discussions on insufficient bandwidth with iChat but I still can't get it to work with certain people. I can chat with and see my friends in Chicago but not my family in the UK. We're all using macs.
-
Skype name grabbed from PC and mobile
I have a friend who's main Skype account was recently flooded with contact requests. She eventually made a new Skype account, and only used it on her phone. But that account was flooded with requests too, and we both have no idea why.
-
How can I lock people out of my computer without signing off User?
I'd like to keep an application open 24/7, but also keep people off computer when not here, if I log off my user (the logical way to keep people put of my stuff) the app closes. thoughts? roger
-
Mac OS X 10.6.7, Firefox 4.0.1. Sync Now from the menu likewise fails. Attempting to get the sync quotas from the Preferences also comes back with a similar error.