I get white edges when I print a file.

This happens on every printer with every DPI width and height.
Even if I save the file as PNG to print it with another program it will get white edges.
Screenshot of example:
[URL=http://imgur.com/sfGbI69][IMG]http://i.imgur.com/sfGbI69.png[/IMG][/URL]
<a href="http://imgur.com/sfGbI69"><img src="http://i.imgur.com/sfGbI69.png" title="Hosted by imgur.com" /></a>

This is what I found when I was searching for borderless printing. I use an Epson SX130.
Print speed (PPM) when printed on A4 plain paper in the fastest mode. 10x15cm photo print speed when printed on Epson Premium Glossy Photo Paper in draft, borderless mode. Print speed may vary depending on system configuration, print mode, document complexity, software, type of paper used and connectivity. Print speed does not include processing time on host computer
USB cable not supplied in box
Otherwise 3mm top, left, right, bottom
According to ISO7779 pattern with Epson Premium Glossy Photo Paper/Photo RPM mode
According to ISO9296
The printer settings don't care, if I'd use MS paint it print it alright.
Here are my other settings.
http://i.imgur.com/u5qOX8H.png
I am printing it on A4 size.
You see these white edges with black rows?

Similar Messages

What color calibration tool do I use to calibrate my MacBook Pro screen to get accurate color when I print my my photos?

What color calibration tool do I use to calibrate my MacBook Pro screen in order to get accurate color when I print my photos?

This what I have been trying...... Maybe my eyes are screwed up or don't understand the process....
What I have been trying to do is squint and make the apple disappear by moving the sliders around in each step. Is that correct?

I get an error when I try downloading files - 8520 Curve

I get an error when I try downloading files with my 8520 curve...and they say must contact my webmaster

Hello !
Could you please be more elaborative for explaining your issue?

Will I always get color discrepancies when lab printing images softproofed on a 75% on AdobeRGB monitor?

Hi,
I am struggling to get printed output from a professional printing service to match what I see when I softproof on my monitor. The printed image always looks considerably more green and warm, although whites are ok. Blue skies tend to get warm greenish. The printed image often looks like a warm instagram filter had been applied.
I have two (different generation) Dell U2412M monitors (Dell U2412M = Standard gamut = 71% NTSC, 74.3% Adobe RGB, 95.8% sRGB).
These are the steps I have taken to try to achieve color consistency between monitor and print:
I have calibrated and profiled with a Spyder 3 Express using BasICColor Display 5 software, previously also used the Datacolor software that came with the calibrator. After this, what I see on my monitor "looks normal" (skin tones, landscapes etc.)
I shoot RAW with a Sony NEX6, develop in Lightroom 4 using ProPhoto 16 bit color space.
I softproof in Lightroom using an ICC file provided by the printing service.
I use Lightroom to print to file tagging it with AdobeRGB profile. Either as TIFF or as JPG 100%.
I print with the direction to the printer to "not make any auto corrections to my file".
I have Windows 7 64bit.
I thought this would mean that I would get - probably not perfect - but at least a very strong match between softproof and printed image. But I do not.
Are these rather strong color discrepancies to be expected given my hardware?
Is my Spyder broken (it's out of warranty)?
Or is my workflow erroneous?

Guermantes wrote:
I am struggling to get printed output from a professional printing service to match what I see when I softproof on my monitor. The printed image always looks considerably more green and warm, although whites are ok. Blue skies tend to get warm greenish. The printed image often looks like a warm instagram filter had been applied.
I have calibrated and profiled with a Spyder 3 Express using BasICColor Display 5 software, previously also used the Datacolor software that came with the calibrator. After this, what I see on my monitor "looks normal" (skin tones, landscapes etc.)
Could be the calibration targets (how you asked to celibate white point etc). Could be the output. Could be the ICC Profile. Could be your file. You have to decide which is which.
Start here: Why Are My Prints Too Dark
Then download a good color reference file like this one: http://www.digitaldog.net/files/2014PrinterTestFileFlat.tif.zip
Soft proof and see if any green or odd color cast appear. If so, probably the profile but use it and have a print made. The output should look good (neutral in neutrals, reds that don't appear yellowish etc).
Generally speaking, if you send Adobe RGB (1998) and the other side assumes it is sRGB, you will end up with desaturated colors. This isn't the fault of Adobe RGB but rather assuming that data is sRGB which it isn't.

How to get rid of white space when creating a PDF file in dynamics ax 2012

Hello,
In Dynamcis AX 2012 we are creating an invoice that is first printed to the screen, but when we convert the invoice to a PDF, white space occurs that our customer cannot have.
We opened a ticket with Microsoft with the following scope layout:
As discussed, I am providing you a copy of our scope agreement for your issue.
Issue Definition: When rendering an SSRS report to screen, report displays as expected. However, when the same report is sent to PDF or printer output, a large white space appears between the header and body of the report.
We've examined every possible setting in the report design properties using Visual Studio, and nothing has been successful in correcting this behavior. Our client has indicated the proper rendering of certain reports is extremely critical to their business relationships with their clients. They've told us that this problem must be fixed or they cannot go live.
Scope Agreement: Provide information on the issue of white space showing between the header and body of the report. May have to rescope issue depending on investigation.
We will now begin working together to resolve your issue. If you do not agree with the scope defined above, or would like to amend it, please let me know as soon as possible. If you have any questions or concerns, please don't hesitate to contact me.
So after we worked with MS for a bit and gave them more information, the final conclusion came back from them as follows:
Message: Hello,
When you examine the report, is the report hiding sections during the print out based on some data condition? IF so, this is going to be returned as By Design. Our current reporting framework will reserve space for the controls even if they are not visible when the report is printed to file (xps, pdf, may even do it if exported to Excel). If this is the case, we don't have anything we can do about it. Development is aware of this issue/limitation, but at this point, we have no workaround for it.
So the question is: Have you ever ran across this issue and does Adobe have a potential solution as Micrsoft does not. Or do you have a potential work around.
Thanks!
Allen Shannon

If you want this to bleed, then you will have to print on oversize paper and trim or find a printer that will print borderless.

Newbie Problem, White edges when using colors?

Hi, I am new to illustrator, and this problem has been bothering me forever. I have googled beyond belief, but no answer. Maybe I am using the wrong terminology? Not sure. But overall, when I create things in illustrator, and use color, there are white edges around everything. Example below.
Also the colors I choose don't seem to be the ones that show up. Like, for the example above, I chose a deeper purple, but a lighter purple came out. I guess illustrator is A LOT different than photoshop.

well, i recently had something like that too.
I just couldnt figure out why it was showing up.
Untill i began looking at the layers.
It seemed that somehow some layers got duplicated and stuff.
So i recommend that you have a look at your layers and check for unwanted duplicates.

Words Getting jumbeled together when I print the reports?

I am using my Crystal Reports to link into YARDi (real estate program), When I print some reports I recently created the words and letters get mixed up??
Please help!

I think its coz of some Version update or Patch problem for Crystal Reports Eclips 2.0
Check this site
Re: Crystal Reports for Eclipse Version 2 - Feedback?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20c69834-cfc4-2b10-da81-960222254295
Thanks,
sandhya

I am getting this message when I start Firefox ' files in your application's profile directory'. How do I resolve it?

I am getting this message when I start Firefox 'Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.'
How do i resolve it and get firefox started?

Please see this article: http://kb.mozillazine.org/Error_loading_secure_sites

Why do I only get the audio when I play video files?

I only receive the audio portions when I play video files. The video is blank/black. This is happening with mpg., avchd and the videos posted to websites; YouTube, Facebook etc. The only video files I can play are windows media files. Windows media PLAYER won't play the other video files? I have the latest updates for my video card and adobe flash player. Thanks for any info! Elwood Windows 7 64 bit, i7 980x @333 6 core processor, 12 GB ram DDR 1600, Radeon 5850 GPU, OCZ Vertex 3 120GB SSD

It is most likely that the various files contain CODEC's, that are either not installed on your computer, or PrE is not able to use them.
You list several file types, and I would urge you to first see this FAQ Entry, then get one of the file info utilities, linked in it, G-Spot, MediaInfo, or MediaInspector, then post the details on the various CODEC's: http://forums.adobe.com/thread/440037?tstart=0
Also, that WMP cannot play the video indicates the likelihood of a CODEC issue.
Try either of the great, free media players, VLC Player, or MediaPlayer Classic HC. Both contain many useful CODEC's, but they do NOT install them into the OS.
Good luck, and with the CODEC info, someone can give your recommendations.
Hunt

Photo has white edges when saved in Acrobat

I have a document in publisher 07 with a photo of a product in it made from Photoshop CS3 saved as a PNG24. No matter how close I zoom in Publisher everything looks fine.
When I create a pdf in acrobat using standard or high quality setting there shows white jagged edges aroung the photo. I have tried saving in a multitude of ways but cannot get those stupid jaggy edges to go away.
Is it Photoshop, Acrobat, Publisher??? Any ideas would be greatly appreciated
Thanks

I suspect it is a "feature" of publisher. That would be much like the white space added around the sides of a PPT when printing to the Adobe PDF printer (unless you click on print to fit) so that printer margins are observed (an assumption of PPT). In photos, a jagged edge might be desired for old-style photos and that is what you are seeing. I am guessing, but I would look for the feature in Publisher.

White screen when attaching printer

Help, my HP Deskjet multifunction device was working ok with my Mac Mini,, then I couldn't scan so I deleted the printer in prefs and reinstalled it.
This was when the problem started, because now if I try to start Mac Mini with printer connected via USB and I get a white screen on boot up I've tried waking for 10 mins and still nothing.
However, as soon as I disconnect the printer it boots ok.
Any help to fix this greatly appreciated.

It's time to get a new printer.

Photoshop elements 12 - For dark T-shirts How do you get white background not to print.

For dark T-shirts using a printer that can print white. OKI pro920WT..If an image has a transparent background, why does it print it white? How can I get it just to print the image and not a big white square? Someone said masking but I don't get iit ? can someone explain. I got image as a tiff.

Also, don't flatten the image when you're done editing. Flattening creates a background layer, which also can't have transparency. Just merge the layers if necessary, instead.

Getting white screen when booting with alt key

Hi, I've installed windows 7 with boot camp on my brand new iMac 27" on OS X Lion.
Everything works fine when I configure boot camp to start as mac, or as windows.
However If I press the alt key when booting, as per this tutorial http://labnol.blogspot.com/2006/04/boot-camp-tutorial-install-windows-xp.html I get a white screen and that's it. Any Idea as to what might be the problem?

Hi
Try resetting the Parameter RAM (PRAM) - pronounced peeram. Restart the mac and depress the P, R, alt and command keys simultaneously. You should hear the boot chime. Keep the keys depressed until you hear the boot chime three more times. Release the keys thereafter.
Other possibilities are: you're filling up the hard drive and you need to clear some space; a problem is developing with the hard drive and/or directory structure. You need to run a disk repair utility such as fsck, DU's Repair Disk coupled with Repairing Privileges or something 3rd-Party such as Disk Warrior.
Tony

Can't get color right when scanning & printing

Hi all. I'm having an interesting (and frustrating!) problem with colour and scanning...
I have a new Brother mfc-9840cdw, and am scanning across the network using it. I find that on some Macs black text and gray shading has a distinct green cast both on the screen and when printed back to the mfc. My main iMac screen has been profiled using a Spyder2 Express, and has this green problem. However, on a Macbook Pro (MBP) scans are the correct colour and print properly. Interestingly, if I take a jpg file produced via a scan on the MBP, open it in Preview on my iMac then print it in colour, it takes on the green cast. Conversely, if I take a file produced by the iMac and print it on the MBP, it prints properly. Same file, same drivers, same settings, everything. This has me really confused! I can't see how the same file can print differently to the same printer using the same driver. I've tried Brother colour and Colorsync colour in the driver settings, all to no avail.
I notice that in the "Adjust image" settings for the TWAIN driver, there are options to use a colorsync profile "Brother sRGB profile". This doesn't help either. A profile never gets embedded in a resultant jpg file, according to Preview.
Any ideas why I'm seeing this weird behaviour?

Have you made sure you are scanning in B&W? This sounds like you are scanning it in color -- black takes on a green cast sometimes when scanned in color.
Good luck

For some unknown reason, I get blank pages when I print from firefox

I used to be able to print from firefox. For example I used to be able to print fed ex labels. Then it about a few days ago it just starting printing blank pages. I thought I was out of toner but it its not the case. I can print from Word and other files but not using your browser.

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

I get white edges when I print a file.

Similar Messages

Maybe you are looking for