I get your credit balance is unavailable what is this and how do i fix
please help
Make a temporary, backup copy of the library and try the following:
launch iPhoto with the Command+Option keys held down and rebuild the library.
select the options identified in the screenshot.
Click to view full size
Launch iPhoto and try importing again.
OT
Similar Messages
-
I am trying to connect to apple store and keep getting the message unknown error occurred (-3212) what is this, and how do I fix it, so I can
access the store againRun it in compatibility mode and input the credentials.
Mylenium -
I have Photoshop 7.0. This is on a laptop running windows 8.1. When I try to open it I get the errro message: " cannot open missing personalization information".
what is this and how can I fix it.Run it in compatibility mode and input the credentials.
Mylenium -
I get a notice when trying to sync my iPad. "this iPad cannot be used because the Apple Mobile Device Service is not started".....What is this and how can I fix it? Help please
Here is a YouTube video which should guide you through a solution: http://www.youtube.com/watch?v=VLFAo-FWLxE
-
My cousin asked me to help with his IPhone 4. It will not do anything except show the Apple logo. I have tried to do a restore on it but keep getting the message "Unknow error occurred. (27)". What is this and how do I fix it?
iOS: Unable to update or restore
-
When I try to "set up" to share iPhotos on Facebook, I get the message "try later." What is this and how do I resolve it?Setting
Same issue here... used to work fine, now when I try to set up to publish photos to Facebook, the "Please try again later" message comes up in the pop-up window instead of the Facebook login. It just started doing this last week.
-
When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry
I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work. -
Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?
Hey HaydenJulie,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides information on permissions issues with iTunes. The troubleshooting steps included may resolve your issue:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M. -
My Ipod is stuck with a picture of a USB chord with an arrow pointing to an itunes logo....what is this and how do I fix it? I did look at the "printers and devices" section on my computer. It shows an un identified "apple" device that is in "recovery mode" but that is. I tried to trouble shoot it there but no help....
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
My software is STUCK on "Retrieving current session status" What is this and how do I fix it? i am not able to convert any files at all!! Please help!
Hi JulietaQ,
In order to help you better.
Please let me know which application or Service of Adobe you are using. If this is subscription i would request you to log-out and log-in back and let me know if that helps.
~Ajlan Huda -
(NSURLErrorDomain error -1012.)(-1012) what is this and how do i fix this
my iMac app store has 1 update for Safari, iTunes, and iphoto. When i click update...this pops up
(NSURLErrorDomain error -1012.)(-1012) what is this and how do i fix thisWait until Apple fixes this issue.
Best. -
I am trying to download creative cloud, but it says "installer failed to initialize". What is this and how do I fix it?
Nobody can tell you anything without proper system info or other technical details.
Mylenium -
I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?
Here is a YouTube video which should guide you through a solution: http://www.youtube.com/watch?v=VLFAo-FWLxE
-
HT1349 Error code -1303?? What is this and how can I fix it??
My father bought a used ipod classic 80G 3 days ago. I hooked the ipod up to my itunes and restored it. As i was loading music to the ipod, I realized that the music was not loading and then I got a error code -1303. I restored the ipod again, same thing happened. I reformatted the ipod and then restored it and now it let me load 6G's of music and won't let me add anymore music. I'm now getting error code -53 and error code -1303. What is this and what can I do to fix this problem?? Please help!
Hi
This forum is for XServes and Servers so your question is not really appropriate. You'd stand more chance of a response if you posted in the correct forum:
https://discussions.apple.com/community/ipod
The main page for all the forums is here:
https://discussions.apple.com/index.jspa
Consult this carefully before deciding which forum is most appropriate for your question.
Sounds like your iPod has failed. You could get it repaired/replaced by taking it to an Apple Store/Genius Bar or Apple Authorised Repair Specialist. If it's still under warranty it should be repaired under the terms of the warranty. Accidental or wilful damage is not covered by the warranty.
HTH?
Tony -
I'm using a Dynex Mini DisplayPort to DVI Adaptor to use a second display (an older display, I'll admit). After I have unplugged the adaptor, my MacBook still tries to read the second display, and switches back-and-forth between a blue screen & my desktop. It stabilizes once I plug the adaptor back in. What is causing this problem, and how do I fix it so I can use my primary display without having the adaptor constantly plugged in?
Reset PRAM.
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
If not try Reset SMC.
http://support.apple.com/kb/HT3964
Best.
Maybe you are looking for
-
Payment of GR against return PO
Please note that along with the other purchase order types we have created P.O. Type ZRPO - Return PO. (No. Range 5000000000- to 5099999999) e.g. Item has been received under ZDOM P.O., GR created, accepted, MIRO Done & payment given to vendor. Aft
-
Trim captured media from FCP in quicktime
i was wondering if there is any benefit to trimming media in quicktime that i captured in FCP. When i captured the media i left on handles big enough to build a bike from, and i was looking at cutting down the size of the media files. Is there a way
-
PDF Optimizer Settings: Where Are They Saved?
PDF Optimizer Settings: Where Are They Saved? That is, the ones that you create and then Save. Also the default one which came along Acrobat Pro (i.e. Standard etc) Thanks
-
Hi All, In the list of my program i h ave added one button in order to download the data on the list to the excel file now it is working fine and all the the other functions of the buttons are working fine except the print command when i go to list a
-
Assistance needed: fading into a menu, etc.
I am relatively new to DVD pro 4. I want to fade from black into my menu. I figured how to fade OUT of the menu, but not IN. Also, when I assign a change in color for a button when it is selected, it doesn't implement? I am selecting different colors