I go to print and get a You must install a printer message first.  Where do I do that?

I go to print a picture on my Editor Screen, by clicking on File > Print, and I get a message that "Your have to install a printer first."  Where do I do that.  My printer is a wireless on my LAN.  Don22303

Jeff,  Yes, from Elements Editor Full.  This is from Elements 10, and I rarely print from Elements so it turns out I was surprised to find the same problem happens with my Elements 8 version, which I still have up.  The version is Windows 7.  I can print fine from all other applications, e.g. Word.  Also print my email, but I had to go back to Internet Explorer 8 from Explorer 9 version because I was getting script errors, but using 8 has been fine for a good while now.  Any advice would be appreciated.   Don

Similar Messages

  • How do I print when it requires you to install a printer?

    Works on all other programs.  Have deleted and reinstalled adobe reader.  Will not print any Adobe data.  Replies with Must install printer.

    1. Buy a AirPrint enabled printer; see list below
    http://support.apple.com/kb/ht4356
    2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
    3. Start printing from your iPad without wires

  • I am trying to print a fillable form.  It will not print and I get two error messages "document could not be printed" and "there were no pages selected to print."  Th latter is not true.  Won't print all, the page I am on, nor any series of pages inserted

    I am trying to print a fillable form - - an application for a Chinese visa.  It will not print and I get two error messages:  "document could not be printed" and   "there were no pages selected to print."  The latter is not true.  Won't print at all, the page I am on, nor any series of pages inserted.
    Am using a MAC desktop and a Cannon PIXMA MX922 printer.
    I need to print this form now that it is filled out?  What can I do? 

    Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
    EDIT: I found it and did, but still not working.

  • Ever since i loaded Xl I cannot print and get the message "Prop Res DLL no loaded"

    Ever since i loaded XI, I can't print and get the message "Prop Res DLL not loaded?

    You get this when doing what?
    Try reinstalling or updating your printer driver.

  • Register printer and get printer email address

    how do i register my 5520 photosmart printer and get a printer email address

    Follow this link and select "Setting up ePrint":
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03282162&cc=us&dlc=en&lang=en&lc=en&product=515​...
    It should have everything you need to get it set up. If you run into any issues, let me know and I'll do my best to assist you. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • If I report a problem and get a "you can't get

    If I report a problem and get a "you can't get your money back", is that the end or has the matter been sent to support for a look?
    What I did:
    I have family share and I found Xcom there with the cloud download symbol, I tapped it and it said "you can't download this", about how specific it was. I tapped it again and it started downloading, never asked for password (to my memory). Later I get an email stating that I had been charged for the game. I submitted a problem and got a fast response, "you can't get your money back". Now, is that it? Or has the matter been forwarded to Apple? If I am not happy, and it hasn't been forwarded where do I turn?

    It's Apple who told you no. That's it unless you want to try calling Apple Care.

  • Printing to Adobe PDF printer and getting the same document, possible??

    Hello:
    I need to split a page A4 into 2 pages, it's possible using print, then tile large pages, the problem is that my original document is black and white, but the generated one has a shades of gray visible when zooming to 800% (and the size is much bigger), so my question is:
    is it possible to print a document to Adobe PDF printer and getting exactly the same document?? same size, same black and white
    I'm using acrobat6

    I suspected as much.  I was hopeful it was something like a setting that needed to be changed or a reg hack that needed a bit changed from 0 to 1 to make the printing work as expected.  I only installed the local printer to see if the RDP session
    tunnel was in fact causing the print size to balloon so I will continue to instruct users to use that instead of the local redirected printer.  I am disappointed but not surprised.
    Edit:
    Additionally I have tested the functionality of setting the GPO settings for Easy Print to use the redirected printer's drivers instead of the ones used by easy print, by setting “Computer
    Configuration -> Administrative templates -Windows Components -> Remote Desktop Services > Remote Desktop Session Host -> Printer Redirection”.
    to “Disabled” but
    with no luck.  In fact the printer received the proper Adobe PDF driver, but the job went out into print spool hell and was lost to the ether.  I have concluded that this approach will not bear any fruit.

  • To update applications do not run them, I get notice, you must connect and asks me cdito card. as I do?

    to update applications do not run them, I get notice, you must connect and asks me cdito card. as I do?

    Contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • Has anybody found a fix to The document could not be printed and There were no pages selected to print error

    Has anybody found a fix to "The document could not be printed" and "There were no pages selected to print" error?
    I am using a Mac and I'm running the latest versions of OS X 10.6.8 and Adobe 11.0.10 but I'm unable to print.  I need REAL HELP not a suggestion or a get around!  and NO print as an image doesn't work, nor do I see that as a fix!
    Please help!

    Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
    EDIT: I found it and did, but still not working.

  • I deleted my Iphoto and need to get it back! I bought this mac book off my sister and have none of the install disks. If there a download or something that I can get to reinstall it?

    I deleted my Iphoto and need to get it back! I bought this mac book off my sister and have none of the install disks. If there a download or something that I can get to reinstall it?

    Depending on the age of your machine and the version of iPhoto, you may be able to download it from the App Store - but you'll need her account details to do so.
    Other than that you'll need to purchase it on the App Store.

  • In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card

    I get this message when I try to TCP/IP settings in any network card. 
    "In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card"
    What I have tried:
    1. Removed card, did not click on "Remove driver". Then re-scanned in device manager. This usually leads to the network card showing up with a yellow exclamation mark, and I can not get it work again (have to use system restore).
    2. Removed card, deinstalled driver, re-installed driver. 
    3. Rebooted a thousand times. 
    4. Used the Lenovo drivers.
    5. Used the Intel drivers. 
    Doesn't matter what I do, I'm stuck with yellow exclamation marks in the end for the LAN and WLAN card, with not hope to repair them.
    Driver version for the Intel 82579LM is 12.9.15.0
    Driver version for the centrino advanced-n 6205 is 15.10.4.2
    I'd really like some help on how to fix this so I'm able to configure my network manually. 

    For clarity, as your machine MTM number lists it with another type of WLAN adapter, and apparently, therein lies your problem.
    How To Fix Error Message : In Order To Configure TCP/IP , You Must Install And Enable Network Adapte...
    [How To Fix] In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • I keep getting the "You've been signed out" message - Cannot login to download apps

    I keep getting the "You've been signed out" message, even after the CC update. I created a new account today, and have tried uninstalling and reinstalling CC, but nothing has changed.
    Can't log into my account = can't download or access the apps I need for work.
    After checking the forums, this seems to have happened to quite a few people. I wouldn't be so antsy if it weren't for the fact that I need to access a project immediately.
    The chat isn't working, so someone PLEASE HELP!!
    Val

    Ok, so I had to resort to Twitter, but a lovely person by the name of Britt at @AdobeCare gave me a hand we were able to solve the issue. I'm posting the links she sent me, hopefully they'll be of use to anyone who encounters the same issue.
    Solution 2 is what did it for me:
    http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
    I'm on a Mac, and the only problem I encountered was that I couldn't reach the Library folder from my User Name (I think the folder was hidden) which was preventing me from finding the opm.db file that needed to be deleted.
    If this happens to you, try this:
    Open Finder, click Go (next to File, View, Edit, etc) and click Go to Folder...
    Then type in /Users/[insert your profile name]/Library/Application Support/Adobe/OOBE
    That'll reveal the opm.db that needs to be deleted.
    Click here for other ways to find the hidden folder: http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html
    This is what ultimately worked for me. After deleting that .db file, I relaunched CC and signed in without a problem.
    Hope this is useful to someone!
    xo
    Vale

  • I have a new hp 2050 printer and received a 10.0000 supply memory error message. what does this mean

    I have a new hp 2050 printer and received a 10.0000 supply memory error message. Can anyone tell me what this means and how to fix it?

    mickeymackey, this error looks similar to a related error code that I found for laserjets. Here is a summation of that error code:
    http://goo.gl/W7dP6
    This describes the problem as being a cartridge error, in which case I would follow the instructions in this document and see if that resolves the issue:
    http://goo.gl/h6hWz
    that does not resolve the issue, then I would recommend performing a hard reset of the printer. This would involve unplugging the printer for thirty seconds from both the back of the unit as well as from the outlet it is plugged into and then plugging the machine back in and powering it on.
    A few additional questions are: Is this printer plugged into a surge protector, wall outlet or battery backup? The ink you are using, are they original HP cartriges or have they been refilled before?
    Let me know!

  • Recently moved to switzerland from canada. Can i just plug in my desktop and get started?? I've had my laptop here before so know that it is that easy just unsure about my desktop??

    Just moved from Canada to Switzerland. Can I just plug in my Desktop and get started?? I've travelled with my laptop before so know that it is that easy!! Just not 100% sure about my desktop!!

    You can, but the power outlet type may differ.  All Intel Macs have no trouble understanding current from 110 to 250V

  • How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

    How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

    Rebuild your iPhoto Library:
    iPhoto 6 and later: Rebuilding the iPhoto library

Maybe you are looking for