I got 0x80070052 error with my books.

I got 0x80070052 error with my books. With this error i can read books til page 40 or 50 and then i get the error file open failed. Please help*

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Similar Messages

I got the Error with PHP5 with Oracle8i

Dear friends.
I am using php in Apache server. in windows platfrom.
i connected with oracle8i with php5. so i uncomment the php_oci8.dll file.
but it doesnt show in the phpinfo page.
then i use this method to connect. : ocilogon('scott','tiger','TEST202');
i got the error.
Fatal error: Call to undefined function ocilogon() .
i checked the php/ext directory . in that directory it contain the oci8.dll file and oracle.dll file.
so pl give me A to Z step by step how to connect with the oracle databse using php5
pl help me.
thanks
Bhagya

Set your ORACLE_HOME path and then when you're doing the configure, use --with-oci8=$ORACLE_HOME and it should configure it that way. I'm not sure if php5 works with Oracle 8i client, you might have to use the Oracle 10g instantclient and link to that instead, then set your tnsnames up to go from 10g instant to the 8i server.
~Jer

Got deploment error with Interactive forms

Hi Frnds,
Jus now i instelled ADS(Acrobat designer lifcy), n i did't made any changes in sld r vis admin ,i want to genrate a reports in PDF formate , so i designed a view with Interactive forms n i deployed ,igot this error
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found. The request URL was:"<http://localhost:50000/AdobeDocumentServices/Config?style=document>". Check, whether the URL is correct, and the Web Service that you are requesting is up and running
is it necessary to made a changes @ SLD n visual admin
thanks & regards

Hi
Open the j2ee engine web page and go to web service navigator --
http://<servername>:<port>/wsnavigator.
there should be a ADS webservice there. you should be able to execute it successfully. if it is not present then it means ADS service is not installed on your server.

Cropping error with picture book page type 2

Hi, I'm trying to layout my first book in iPhoto and am running into a problem with one particular page layout. Whenever I have two tall pictures on a page, iPhoto chops off a large part of the side of the photo. If I select "Fit Photo to Frame Size" the photo is shoved to the edge of the frame boundary and still doesn't show the missing part of the photo.
Has anybody else run into this problem before?
I'm using iPhoto 5.0.4 (263)
I have the same problem with both the classic picture book theme and the newer version.

Eric:
Welcome to the Apple Discussions. Are they both cropped to the recommended 4:3 book constrain? If they aren't that may be the reason. The frames are designed for 4:3 photos and will fill the frame precisely with them. If the photo is a different size one of the dimensions will suffer.

Encoding error with Itunes book purchase

I'm missing an entire chapter of just purchased Steve Jobs book. "This page contains the following errors: error on line 1 at column 1 ... etc." Tried restore my IPAD -- but still the error code. Any suggestions

I have been recieving the same error for the last three days (Feb '08) I can access every part of the iTunes store except shopping cart. I get the same message on two different PC's.
I have been using Shopping Cart as a "wishlist" and really dont want to have the contents cleared as I cant remember everything I've put in there. This bug seems fairly prominent on Apples part based on the number of posts about it in the forums.
Can someone point me to a good source of info on a fix for this?

Got one error while activating data in dso

Hi,
I am loading some data to SAP given dso 0figl_o02. while doing so i got one error with following description
Error short text : "Value "CONVERSION REVERSAL " from characteristic 0DOC_HD_TXT contains an error at position 20"
Long text : "Characters that have a hexadecimal format between HEX00 and HEX1F are not permitted in characteristic values. The 20th character is one of these characters. The value is therefore not permitted.
I dont know how to find out exactly which record has this wrong data. I checket in PSA for this record with error its not showing any of such records.
Please suggest some soluion
Thanx

Hi Sudeep,
First you need to get the values from characteristic 0DOC_HD_TXT that contains an error.
Therefore, go to the ODS/DSO contents tab through RSA1(manage) and select the first option LOGS and then you will be able to select log for Activation and then execute it.
You will no get several requests, select your relevant request which will be in red and then select Application Log at the botton of the screen, then you will be displayed with another screen there you check the date of activation is correct or not becoz by default today's date will be there.
Then you will get the log for it --> double click on the problem class which is in red for it and you will get the value for the 0DOC_HD_TXT where it has special char.
Then go to PSA select all data packets and number of records (give full number of the records transfered) and then enter. It might take sometime if you have huge data. Once you get the records then filter on the 0DOC_HD_TXT column and then give the value you copied from the log.
Then you can edit the special char (remove) or if you want that to be displayed then paste the same spl. char in RSKC and execute.
Activate it again.
Hope it helps...
Best Regards,
MK

Error with ZCM 10.3.3 Agent

Hi,
I got this error with 10.3.3 ZCM agent.
Client is XP SP3.
Server is w2K3 64Bits
Full Message:
An error ocurred during a general refresh in module: Registration Module. Error Message: Could not load file or assembly 'Novell.Casa.Client.Auth, Version=1.7.0.0, Culture=neutral, PublicKeyToken=ed0eb71059ea593b' or one of its dependencies. The system cannot find the file specified.
nexpected exception received when refreshing handler Registration Module(GeneralRefresh): Could not load file or assembly 'Novell.Casa.Client.Auth, Version=1.7.0.0, Culture=neutral, PublicKeyToken=ed0eb71059ea593b' or one of its dependencies. The system cannot find the file specified.
Please help.

sl0000,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Error with first attempts at exporting flash

The first thing I tried when with CS3 is exporting a project to flash... I got an error with this first attempt which was a CS2 project so I made an all new project just to see it...same message - here it is.
a DOS window message...
"OMP abort: Initializing libguide.lib, but found libguide40.lib already initialized.
This can cause performance degradation.
Set environment variable KMP_DUPLICATE_LIB_OK=TRUE if you want your program to continue in this case."
and an error message pop up window that reads...
"The instruction at '0x186925ab' referenced memory at '0x00000008'. The memory could not be 'reead'. Click on OK to terminate the program"
Oh I get it! Yeah no I don't. Anybody familiar?

I called adobe customer support, they are clueless. It is now December (4 months after the first post) This is a linking problem, and the developers are at fault. This is a true bug and not a problem with your computer.
The fix is as follows (windows xp)
Add the environment variable KMP_DUPLICATE_LIB_OK=TRUE to windows to fix it. In other words, do what it says.
1. On the Desktop, Right click on My computer and choose properties
2. Go to the Advanced Tab and click on the environment variables button
3. for the top window (user variables) click New.
4. In variable name enter KMP_DUPLICATE_LIB_OK (all uppercase and include the underscores)
5. In the Variable value enter TRUE (all uppercase)
6. Click ok
7. Do the same thing for second window (system variables)
8. You should not need to restart your computer, just restart encore.
If this does not work for you, you either misspelled the variables, or did not capitalize. If it still does not work for you, you may be out of luck.

Very disappointed with photo book quality

I created and ordered a photo book using Aperture and am extremely disappointed with the quality. The opening page has a spot of red ink on it with vertical red banding through the center of the image. Many other pages also have the banding.
Most of the images are also very grainy. I know the source images are not at fault, they are very smooth and look nice on my monitor and when I print them. In fact I ordered a few prints through Aperture and they came out really nice. The grain pattern is the same for both full page prints and those that are sized down to about 2x3.
On top of that, the paper quality seems worse than previous books I have created using iPhoto. I was always happy with those books, and I assumed Aperture would be the same if not better.
The books I created with iPhoto were with jpeg images from the same camera, a rebel xt. The only difference this time was most of the images were shot as raw. There was also a small handful jpegs shot with a point and shoot and these have the same grainy pattern as the the raw images.
I sent an email to Apple support, but are others still having book quality issues with the latest version of Aperture 2? This is unacceptable, especially for the amount that is charged. Would it have been better if I exported the images as jpegs, imported them into iPhoto and created the book there?

Hi guys,
I got a real trouble with aperture book printing.
The cover is Ugly it looks like it's scratched over some miles. It's Mate. And it looks printed with a poor inkjet printer.
Inside the book the photos looks almost correct but in the skies we can see some vertical line. I'm fully unsatisfied I got better result with iphoto books !
Please Apple do something. I ordered this book from France. Ans I saw on different forums that they can get better quality than this outside France.
The paper looks very light.
I'm considering ordering books from blurb. And I feel sorry cause aperture tool to create a book is awsome.
Did any french photograph experienced this ?
Regards every one.
Bye.
PS : I printed the pdf and checked at 100% the photos looks great.

Error with master page "insert current page number" when exporting book

Using InDesign CS 5.5 for Windows
Recently upgraded from InDesign CS (the really old one from 2003). I did save a copy of all my old version files and kept the old ID installed just in case (after reading all the horror stories on here).
In my old version of ID, I created a book made up of about 70 documents. Some of these documents are one page, others have multiple pages. In the multiple page documents, I used the "insert ... current page number" character (or whatever the command was in the old version) on a master page, and formatted it to read, for example: Page 1 of 17, Page 2 of 17, Page 3 of 17, etc. When I exported my book to a pdf, it worked fine. (I do not want/have consecutive page numbers throughout the book, only in individual documents. By this I mean my entire book is about 280 pages, but not all of these 280 pages are numbered, just the groups of pages from these multi-page documents. It doesn't read page 1 through 280.)
Got my upgrade to 5.5 a few months ago, added some documents to the book, and (if i remember right) when I saved the book it asked to convert every old version document to the new version, which I said okay. When I exported the book to a pdf, some documents that are longer than 2 pages are now numbered wrong; the numbers are now going like this: Page 1 of 17, Page 2 of 17, Page 2 of 17 (supposed to be page 3), Page 2 of 17 (supposed to be page 4), etc. Every page but page 1 is now page 2 of whatever.
If I open the individual document and export it to pdf, the page numbers work fine. It's only when the document is exported with the book that the page numbers mess up. And it's not all the documents in my book; this error starts at a particular document and continues from that point throughout the rest of the book, affecting any document longer than 2 pages. Multi-page documents before this point in the book export with the correct page numbers.
I create new documents by doing a "save as" with a previously created document and cut and paste as needed, so I'm not having to reformat or set up page numbers on each new document. I don't use layers or styles (I'm sure there's a better way to do what I need, but I've only had time learn the basics, just enough to be functional.)
My attempts to fix this so far (using version 5.5), testing with the first document where the error appears: (1) I've removed the document from the book, deleted the insert current page number character, re-entered the insert current page number character, saved, exported the individual document to pdf and it worked fine. Put it back in the book, save, export, and it's wrong. (2) I took the document out of the book again, exported the document to .idml, saved as new .indd with new name, exported to pdf and it worked fine. Put it back in the book, save, export, and it's wrong. (3) I started up my old ID version, opened the old version of this document, exported to .inx, closed, opened .inx in ID 5.5, saved as new .indd with new name, exported to pdf and it worked fine. Put it back in the book, save, export, and it's wrong. (4) I moved the document up in the book order, putting it above a document that has correctly numbered pages, saved, exported to pdf, and this document was still wrong, but the one that has been numbered correctly all along is still correct. (5) I've compared settings for this document to others that number correctly and cannot find any difference.
It's like the page numbers get hung on "2" when I export the book, but only in the last two-thirds of the book. Sorry it's so lengthy, but I hope this description of my problem is understandable. Any advice, other than going back to my old version documents and starting over?
Thanks for your time and for all the awesome information this forum provides!
alice

Mr. Spier
Right after I posted my question, I saw a post from last year where somebody had similar problems. (I cringed because I spent almost 3 days researching this problem and never ran across that post; thanks for not scolding me for posting a semi re-run.) I decided to try one of the easier solutions: I opened the problem document from the book panel, went to the master page and deleted the text box containing the page number, copied the page number box from a document that worked correctly, and pasted it into the problem document. Saved that doc, closed, saved book, exported to pdf, and it worked!! The page number problem was fixed. I went back and did the same thing for the other problem documents and they all number correctly now.
Probably not the best way, but for now this will fix it; I may have to do it again next time I add to the book. Although I didn't follow your instructions, I'll mark this as answered since it's working now. If it keeps giving me problems, I'll try the .inx export/new book route.
thanks for your time
alice

HT4059 I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't

I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.

Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
*To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
*The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
*I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
Much Respect
Lammo

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said "ERROR IN PROJECT

I'm making a DVD with my iMOVIE and when I tried to burn a DVD I got an error message that said
"ERRORS IN PROJECT
There were errors during the project validation that have to be fixed before burning the project."
What does this mean and how do I fix it.
jim

Hi
Do You have a NEW Mac ?
Does it really have iDVD ? New ones Don't.
Please tell much more
• Mac used
• Program used (versions)
• Material used (Codecs, file formats etc)
Yours Bengt W

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

TS3682 I'm trying to set up my new iPhone 5s with my iCloud account. I backed up my iPhone 4s before I started. I got an error message about backing up from my mac and my mac had installed an update. However my new iPhone 5s looks frozen??

I'm trying to set up my new iphone 5s. I've backed up my icloud for my 4s to my mac. When I've tried to download from my icloud to my 5S i got an error message and my mac has updated itunes (I think). My new 5s is just sitting with the apple logo and a bar underneath which has moved about 10% but nothing for about 20 mins. I can't turn the 5s off? What do I do?

Problem resoled - it sorted itself out!! Thought I'd broken it before I'd even used it.

I got 0x80070052 error with my books.

Similar Messages

Maybe you are looking for