I got a black page after downloading update 5

I downloaded update 5. Now I get the tool bar, but the screen is black and can't see anything. I am now using Internet Explorer.
What happened and can this be fixed?

Similar Messages

TS1702 What is wrong with Pages after the update?

What is going on with Pages after the update?

Hey George.iD, you wrote on 6 Feb 2014, this:
Re: What is wrong with Pages after the update?in response to TRSPAGES
What's wrong with it?
As one thing after more-than a month later on 22 March, Pages _refuses_ to alter the color of text. How maddening this is: I select text, I select a crayon, but the text _remains_ black. < Pages is Incorrigible! :-( >
[After I vented steam, I feel better -- until later. What a cycle! :-) ]

Got original iPad. After manually updating I can not open 'keynote' app at all! Why???

Got original iPad. After manually updating I can not open 'keynote or pages' apps at all! WHY???? Help please? Laters x.

Oops! Ok, I was mistaken, I'm only on iOS 5 :(
But why if it's worked from the begining whys it, or where's it gone? All my work??? :(
And will it only come back if I ask my friend to upgrade again?? (tut! I don't know how! derrrr!)
Would appreciate if you know any of the above?? Laters x.

I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss

I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss
how do I find the file and replace it or install it?

I'll reload it tonight when I get home...basically, I bought a new iPhone and downloaded some new medical apps. also had to download an update for iTunes into my mac laptop so I could access iCloud (which was NOT on my prior iTunes software)
When I synched my new iPhone with the newly downloaded iTunes, I registered my iphone and tried to "back it up" to iCloud and the message indicating that "the required file was not found or has a permissions error...." popped up.
How do I correct the permissions error, or...am I able to do this somewhere? Or...how do I find the file that is missing?
Dr. Bob001

My early 2008 Macbook Pro is suffering from black screen after Yosemite update

My early 2008 Macbook Pro is suffering from black screen after Yosemite update. It ran beta 5 great but failed on restart after beta 6 install. There is no cursor but I can hear the HDD spooling up. I have tried booting in safe mode, PRAM reset and SMC reset but nothing works. After the first 5 days of every now and then trying to start it, it started fine. I used the machine all day with no problems, it had rolled back the install and was back on beta 5. I decided to try the update again, the same thing happened and it has stayed black for over a week now. It wont work with a monitor either. Help!

Hello Adam,
I would try instead of installing the beta software, to install the official build of OS X Yosemite from the Mac App Store to see if that gets you passed the no video issue when updating the beta software.
How to install OS X Yosemite on your Mac
http://support.apple.com/en-us/HT6412
Regards,
-Norm G.

After downloading updates in C5 camera raw stopped working. I am trying to download DNG CONVERTOR but when I press 'download' it just times out.

After downloading updates in C5, camera rawstopped working. I am trying to download DNG CONVERTOR but when I press 'Download' it just times out. Is Photoshop having problems as I have tried for three days now.

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Photo Booth became black screen after Newpad updated to iOS 7

Photo booth became black screen after Newpad updated to iOS 7

It is not a widespread issue that requires apple to come out with a fix, I have many ipads that were updated and have no issues.
I would suggest you back-up and restore your device, that can repair many issues if the original update was corrupted.

PDFs capped 34 pages after iBooks update

My entire PDF collection lost their front covers and are all capped to 34 pages after the update.
Any fixes for this yet?

Solved this way: Start up iTunes, de-select all the PDFs on the device, hit synchronize. Re-select all the PDFs again on the device and hit synchronize. Books will be removed then re-added to the device with front covers and correct no of pages.

Had a problem after download updated itune, error 7 (window error 126) cant open itune at all

Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

After downloading updates for the first time, i was asked to restart my mac. it starting writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success.

after downloading updates for the first time, i was asked to restart my mac. it started writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success. it has not updated my mac OS X 10.5.

My clean install worked out alright, although I don't think it really fixed anything, rather gave me a couple more days of use 'till I have to send it in. Someone please help my get it running properly again...

HT4623 after downloading updates it doesnot install so what to do

after downloading update of software to install it says cannot update now try again later

after downloading update of software to install it says cannot update now try again later

After downloading update to 3,6 i canot open a link because it prompts me to a blank window

i have problem after downloading update to 3,6
i canot open a link because it prompts me to a blank window
my conection to internet iw ok
the internet explorer works
i tried to dowload and reinstal the new version and the problem persists.

It appears that "Ask" was the culprit although it had been working until the latest update. I guess I'll leave it out until the next issue and see if this issue is resolved. Thanks.

Why does my iPad 1 not open documents in pages from my mac after downloading update on pages on mac?

Why does my iPad 1 not open documents from my updated mac-pro laptop pages since i updated the mac. Have updated latest pages for iPad 1 it could and still not able to open docs as i could before update on mac-pro

The most recent version of Pages that you can run on the iPad 1, running iOS 5.1.1, is not compaible with the newest version of pages on the Mac.
If you had the old version of Pages on your Mac, and off hand I can't remember what version it was, you should still be able to use that version and then it will be compatible with the Pages app on the iPad. I updated to the newest version of Pages some time back but was able to keep the older version as well.

Black SOD after Vista Updates on Satellite A205-S5804

I have a Satellite A205-S5804 laptop running Vista Home Premium. It ran fine until an automatic update (about a month ago). Then I got the Black Screen Of Death during bootup (somewhere after the Vista starts to load but prior to the user logon). Took it to the Geek Squad who says it isn't hardware related (as my extended warranty only covers hardware). They claimed it is a corrupted OS. I think they are correct about it not being hardware since I can get it to go to Safe Mode. Restore didn't work. I acquired a copy of Vista Home Premium and attempted to run repair but that didn't correct the problem. Next I reloaded it. Everything ran great like it is suppposed to. But the automatic update downloaded and installed the 92 or so Vista updates that it supposedly needs since the Vista disk was produced. Now the problem is back. I can get to Safe Mode, into the BIOS and just about everything else except I cannot get it to boot normally without black-screening before the login to user prompt. I have hooked an external monitor up and when the laptop blacks out the external monitor reports no signal. I suspect there is an issue with a Vista update (which one I do not know). I have already backed up the data I want to save and have that on another computer. Any suggestions other than to reload Vista and not ever acquire any updates? Is there a setting in the BIOS or a "fix" to the Vista update? I tried searching for hours on this issue and have not found a solution. Thanks for any help or suggestions from other Toshiba users.

Restore didn't work.
What does that mean?
It means that when I selected an earlier restore point (prior to when I suspect the Vista update downloaded and installed) the black screen issue remained. At none of my restore points could I get the issue to go away or resolve itself.
I tried the Toshiba restore to out of the box, or at least I wanted to, however, following the manual instructions the laptop did not give me that option. I held down the 0 (zero) button and powered it on but it did not go into the Hard Drive Recovery mode. I suspect my model is not one of the ones that came with this option.
So, after taking the laptop to the Geek Squad originally after the problem appeared and verifying that I don't have a hardware problem and also trying the recommended methods for returning to a stable and fully functional computer, I purchased a legit copy of Vista Home Premium so that I could reload the operating system. Yes, I am realizing how much more difficult Vista is than XP. I have reloaded Vista from scratch. I registered the copy. I have downloaded and installed SP1. I am currently doing SP2. I am basically creating a clean machine with just an OS loaded. Once I am sure that it will function properly (no more blacking out) I will reload my programs and transfer my data back.
Tedious process...but it seems like my best option. And now that it is in progress there really isn't any point in trying anything else other than uninstalling any update(s) after I reach a stable point that may be causing the screen to black out. If and when I reach that point again I will visit Microsoft to see what assistance I can get for any Windows Updates that I can identify as being troublesome.
I really appreciate everyone's input and suggestions. I was hopeful that it would be something as simple as an outdated driver or something along those lines. However, as much as I have searched, I have not found anyone who has had the exact same problem and there doesn't seem to be an easy cure. I will keep you posted on my success or failure with the method I have chosen. Thanks again.

OK, Newbie to Mac question. Do I need to keep files after download/update

Sorry for such a boring newbie question.
(My last Mac was many years ago - the original Macintosh 528k with 2x 3.5" disks. The OS has changed 'a little', and doesn't have to be loaded in every startup!! Wow !!)
I had to go PC for business reasons, but now, I have <control> over my computing needs again. (Photographic business.)
OK. I searched Mac 101 but didn't find an answer.
Apart from Application Icons and/or Folders I have created, I have acquired a bunch of other files on the desktop. Do I need to keep them?
When I download updates, for example, I end up with a .dmg icons showing the HD in the center, with a title such as i1Match3-2.6Pantone.dmg (after updating my calibrator). I know the update is installed (and the app. is in the dock). Same with downloads or updates with Lightzone,, Firefox, etc.
First Question. Can I trash those .dmg icons?
Similarly, I have icons with what looks like an external HD, which I guess is the actual download. For example, RapidWeaver 3.5.1 (no extension), but there is also a .dmg icon. These "HD" icons cannot be dragged into a General Folder on the Desktop.
Second Question. If I can trash the .dmg icond, can I trash the "external HD" look icons once the program is installed. If I can't, where should they be kept ... I don't want them all over the Desktop ??
Third Question. I have some Folders which just materialized over a few days of use.
"Apples Caches" Folder (with arrow=shortcut?) with 10 file icons and 1 folder icon. Another ... "com.apple.kernelcaches" Folder with one 'kernelcache" file icon.
And three empty Folders "Edits", Measurement Data", and "Scan Tiffs". Have no idea why they popped up.
What to do?
Thank you for reading my questions. I look forward to your proposed solutions.
iMac 2.33 Intel Core Duo 2GB 667Mhz DDR2 SDRAM 24" LCD Mac OS X (10.4.8) G Drive 250GB Back Up; Epson V750M Scanner; Epson R2400 Printer; PS CS2 9.0.2; Aperture 1.5.2

Al:
Thanks for the quick reply ! The .dmg's and the "HD" icons are now GONE. I am curious why they are needed after installions, but I will read up on that to satisfy my curiousity.
Now, the remaining question ...
The two 'Apple caches' folders appeared on my desktop, just below the Macintosh HD icon, probably about a week or so after I got my Mac. I can't recall doing anything 'bad' or having any 'crash' or freeze-up. I seem to recall having to do a 'force quit' at one stage when I was setting up the scanner and Silverfast6Ai because I initially tried to instal non-Intel software. But on that occasion, everything fired right back up OK and the Mac has been absolutely brilliant ever since. What a wonderful change after XP and IE7 and all the daily drama.
The Folder which has the small black arrow (I guess shortcut) has files for:
com.apple.IntlDataCache.le
com.apple.IntlDataCache.kbdx
com.apple.IntlDataCache.le.tecx
com.apple.IntlDataCache.tecx
com.apple.IntlDataCache.sbdl
com.apple.IntlDataCache.le.sbdl
com.apple.IntlDataCache.le.kbdx
com.apple.IntlDataCache
com.apple.Components2.SystemCache.QuickTimeComponents
com.apple.Components2.SystemCache.Components
plus it also contains a Folder:
com.apple.kernelcaches ... which has
kernelcache.ED112BB5 as the file.
Does this help you? I don't know if they have to be "put back" somewhere, or they are temporary files which can be trashed.
(As for the other empty folders "Edits" etc, my guess is they somehow arrived during a scan which I cancelled halfway through, or maybe from the Rapidweaver application when I was 'testdriving' the program. I am inclined to trash them anyway. Can't see how that would hurt.)
I reported that the question had been answered, anyway, but I would like MORE of the same !!
Cheers
CJ
iMac 2.33 Intel Core Duo 2GB 667Mhz DDR2 SDRAM 24" LCD Mac OS X (10.4.8) G Drive 250GB Back Up; Epson V750M Scanner; Epson R2400 Printer; PS CS2 9.0.2; Aperture 1.5.2

I got a black page after downloading update 5

Similar Messages

Maybe you are looking for