I Got a Problem,

Ok i just built a new computer now i've installed XP went to install the Nvidia Nforce2 drivers for motherboard (K7N2 Delta-ILSR) they installed ok, Then i installed my video card drivers (MSI GeForce Fx5900SP-VTD256) upon reboot my computer failed to load it got passed the windows XP loading screen then just hung on a blank screen before it got to the winXP login screen, then restarted.
loaded up again said my windows failed to load up right before blah blah blah so i went into safe mode, where i was greeted with a message saying basic the MSI GeForce Fx5900SP-VTD256 display drivers was the reason behide my computers instability. so i uninstall them restarted my computer and my normal windows mode loaded up perfect, so i install the drivers again and believe it or not got the same problem. so i went into safe mode removed them and restarted, when i got back into normal mode i went to msi website and downloaded the driver for my videocard on there, install them and got same problem. so this time i went into safe mode and removed the Nvidia NForce drivers restarted my computer and believe it or not my computer loaded up in windows normal mode, but when i check my haardware section i also noticed it uninstalled my videocard, so i install my videocard drivers again restarted my computer, computer reloaded and went straight into windows normal mode with my video drivers installed, then i install the nvidia nforce drivers and restarted, guess what. yep my computer failed to load into normal windows mode so i went to safe mode again but this time there was no message waiting for me to say what the problem was so i uninstall my display drivers restarted and came here hope someone understands what i've wrote and can help me if you need anymore info on my system just ask

Well restarts on machines are commonly caused by two things...so again they must be checked first:
PSU has to be powerful enuff to supply the amps/power that the system requires...get something more beefy to power this rig.
Power Supply Guide
Second check your memory to see if it's failing using memtest. If you get any failures after say 10 to 15 passes then you've got a problem. Run it overnight and see what it does...
After that I would look at compatibility of components in the system such as video card or sound card...
Driver combinations are important and certain versions don't play well together...
Good luck on your troubleshooting!
Bonz

Similar Messages

Got a problem with BIOS in my board MSI 785GM-E51

i have a MSI 785GM-E51 board,i got a problem with the graphic card bus interface,it still run in 8x not in 16x
i try to disable a onboard graphic on BIOS,but i not find it.
and last i try to update BIOS to v2.4 n' not work too.
this a example;

Quote from: Bas on 08-March-10, 21:21:36
You do not need to disable the onboard.
As for the plug-in card, there is nothing in the BIOS to make it work 8x or 16x.
Make sure your card is seated correctly, else it will work but at lower number of lanes.
What program is telling you it's 8x?
GPU-Z

Windows 8.1 Installation On Mac - Got a Problem

Windows 8.1 Installation On Mac - Got a Problem
Hi everyone,
I'v researched a lot about installing Win on Mac but I still got a problem when everything seems to be fine.
I got a Macbook Pro Retina, Late 2013 with OSX Mavericks and Bootcamp 5 installed on. And for installing windows, I already got an empty 8GB USB Drive formatted as MS-DOS (FAT32). And I've prepared Windows 8.1 ISO in my Downloads folder.
During my last effort, I opened Bootcamp Assist and then Chose the options: "Create Windows 7 or later version installation disk" and "Download the latest windows support software from Apple". Then I chose my Windows 8.1 ISO location and my destination. When it finished ,I was expecting it to run windows setup. But it closed and nothing happened
When I opened BootCamp again, only the first two options were available as before and "Install or remove Windows 7 or later" wasn't.
Now ,what do I have to do exactly? (NOTE: I'm not a professional. So please answer in a simple way. )
Should I restart the Mac and Hold OPTION while booting to run Windows setup? I was thinking about it but I thought I might screw it up all. So I decided to ask it here to be sure.
Any help will be appreciated by heart!

Hi Alcatrax,
I would recommend following the steps in this link in order to help you complete your installation of Boot Camp:
Boot Camp Help: Install Windows on your Mac
https://help.apple.com/bootcamp/mac/5.0/help/#apdecf0e4b6-b472-438d-881e-57c230b 1c250
Prepare your Mac for Windows
Boot Camp Assistant helps prepare your Mac for Windows by creating a new partition for Windows and then starting the Windows installer. Optionally, you can install Windows using an external USB drive that contains a Windows ISO image downloaded from Microsoft and Windows support software.
Important: If you’re using a portable computer, connect the power adapter before continuing.
Insert an external drive into the USB port on your Mac and keep it inserted while you install Windows and Windows support software.
Open Boot Camp Assistant, located in the Other folder in Launchpad.
Select the option to install Windows, select other options you need, then click Continue.
Here are the other options you can choose:
If you want to install Windows from an external USB drive and you have a Windows ISO image, select the option to copy the image to an external USB drive. If this option isn’t available, your Mac doesn’t support installing Windows from an external USB drive.
If you haven’t already downloaded the Windows support software for your Mac, select the option to download it. In a later step, you’ll install the Windows support software on your Windows partition.
Follow the onscreen instructions for the options you selected.
When you’re asked to create a Windows partition, specify a partition size. If you have multiple hard drives in your computer, you can select a different hard drive and create a single partition on that drive, so that the drive is solely used for Windows.
Note: You can’t resize the partition later.
If you need help determining the best size for your Windows partition, refer to your Windows installer documentation. For Windows 8, create a partition that is at least 30 GB.
In a later step, you’ll format the Windows partition.
If you are using an installation disc for the 64-bit version of Windows, insert it into the optical drive in your Mac or the external optical drive. Otherwise, keep the external USB drive with the 64-bit version of Windows inserted.
Click Install.
Boot Camp Assistant creates the Windows partition, restarts your Mac, then opens the Windows installer.
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Oracle SOA suite 11.1.1.7 on windows 8 OS, But, during installation i got a problem "Check OS Certification".

I want to install Oracle SOA suite 11.1.1.7 on windows 8 OS, My personal HP Pavilion g6 laptop. But, during installation i got a problem "Check OS Certification". What is this certification. Please Help Me.
Regards,
Satish.

Pl identify exact version of Windows 8. Have you verified that your OS is supported/certified by consulting the spreadsheet at Oracle Fusion Middleware Supported System Configurations

HT4623 Please help me about my iphone5 after I upgraded it into iOS 7.0.4 I got the problem about my connections I can't really have a good connections to my server if I'm in my bedroom and I can't connect to any wifi connection not even searching

Please help me restor my system in my iphone5 Bcoz I got this problem that I can't connect to our wifi in our home after I upgraded this iOS7.0.4...totally very disturbing and frustrating even my outside I can't search any wifi connections ant my network service when I'm in home is very slow my Rogers network is only 1 bar so even I will open my Data I can't really connect so meaning no network connections when I'm in my Bedroom and No wifi connections too I can only possible got connections when I get near the Reuter of the wifi like now while I'm doing this report but in my bedroom totally nothing and not even connecting when I bring this to Rogers outlet where I bought this iPhone,I can't even search or connect in the store wifi itself...very disappointed this problem last 1week already please help me it never happen before just now after I upgrade that iOS7.0.4

Thanks for this mha007 - I can now open FF with a new profile. Can I copy my settings from the old profile or will this bring over the same problem, maybe a corrupt file. If it would bring the same problem, is there any way I can check which file is corrupt, apart from taking them over one by one?

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

HELP! i got a problem with my mobo 945GCM7-L

HELP! i got a problem with my mobo 945GCM7-L
specs;
*mobo = MSI 945GCM7-L(MS-7507) driver installed
*cpu = Intel Pentium E2180, LGA 775
*BIOS = american megatrends version 3.1
*sdram = DDR 2 1Gb
*GPU = sparkle/ nvidia 8500gt ddr2 1Gb128 bit (direct X9.0c and driver installed)
*HDD = seagate sata 80Gb (3Gb speed enabled 'no jumper')
*OS = XP PRO SP2
PROBLEM:
*sometimes it just hang-up (one application only) like a simple Microsoft word 2007.
*while playing DOTA (LAN gaming) = in just a couple of minutes you will experience a lagged then suddenly you'll be disconnected from the game
Isolation:
change the SDRAM with lower and higher RAM = same problem
change the GPU with higher and lower model (driver installed) = same problem
cable connection + good connection = same problem
take note;
I GOT 4 UNITS WITH THE SAME SPECS = 4 UNITS WITH THE SAME PROBLEM
NOW WHAT???

Does it hang using the onboard VGA? Try with prime 95 or orthos for stability testing, what spec are your psus?
You could try the v3.2 BIOS but I'm not sure it will help you.

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help.

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me how to recovery my id information back

Did you follow all of the instructions provided in the article that you linked from? If not, you must follow each and every step.
If you have, then all you can do is contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

HT201413 i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it

i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it

That screen is asking you to connect the device to iTunes to restore it.
tt2

Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or ac

Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or accessory is not certified and may not work reliably with this phone".
How is this possible? I then phoned the shop and told them my problem. When I gave them the details I also found out that the imei No. in the iPhone is the same as on the original box. But the the Serial numbers are different. I already try the support centre but I’m over the 90 days.And there is no Apple Store in Namibia. I hope someone can help me here. Thanks, Ralfar

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

I got a problem on installing iTune-64bit on WIndows 7, error message says the folder "itunes" is on a locked disk or you do not have write permissions for this folder.

I got a problem on running the iTune 64bit on Windows 7, error message says " the folder "itunes" is on a locked disk or your do not have write permission for this folder. Any one ran into this problem ?
It worked before.

Open Disk Utility via Spotlight or in the Applications folder stored within the Utilities folder. Close all applications and 3rd party software and choose "Repair Disk Permissions." Reboot the computer when finished, and test to see if the issue is resolved.

At the creation of MCD we got the problem with Request

Hi All,
we are all very new to SAP MI,
At the creation of CD we got the problem with Request
Creation of CD
we gave these entries
1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
 ->SyncBOs Expect Initial Value
 ->Data Visible to all
2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
 "Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
 ->Continue
 ->Create Request
 ->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"
can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
Thanks and Regards
Dileep Painnamaneni

Hi Dileep,
<<Creation of MCD >>
<<we gave these entries >>
<<1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP>>
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
->SyncBOs Expect Initial Value
->Data Visible to all
Every thing is fine. We need to check Link to SAP MI Home page check box
2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
"Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
->Continue
->Create Request
->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"
In SAP when ever we create any object(tables or MCDs) :
there are two things CUSTOMER NAME SPACE(stored locally in that system only) and FORIEGN NAME SPACE(can be transported)
CUSTOMER NAME SPACE objects starts with 'Z' or 'Y'
FORIEGN NAME SPACE objects starts with any other digit other than 'Z' or 'Y'
So youhave created MCD name CIBERNW which starts with 'C' (its not customer name space with z or y)
so it will be stored in package(so that this package can be transported to any other system later)
So what ever you have done is correct.
You can create your own request also.
But confirm once that whether you are supposed to store your MCD this that package.

can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
So this is the concept of request.
So this request is nothing but....
When ever we create tables or MCDs we try to save it..so if we are trying to create objects in Foreign name space(i.e without 'Z' or 'Y' inthe beginning) so it will ask to create this object in a package which requires request(transport request)
All objects are stored in package,( so this package contains many objects like MCD,SYNBOS etc what ever we store in it) so we can transport this package from one system to another system so to transport we need to generate a transport request for that package and them release that transport request.....
So once the package is released and we try to edit or create new objects in that package it will ask for some new request.....
Yes we can create our own request and later release it.
But in your case u can take up the default request and continue.
If this MCD is for only testing purpose(for our selfs)..means this MCD is just for our testing sake..its better to create it in Customer name space..starts with 'Z' or 'Y'.
I hope its clear.
Cheers,
Karthick

My itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario

HT201210 Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate

Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate...Thanks for all the helps...

Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times

I Got a Problem,

Similar Messages

Maybe you are looking for