I got a question regarding running iOs and Windows using virtual software.
Greetings!
I got a question regarding running iOs and Windows using virtual software. I recently bought a monitor so I can display Windows on it and run both OS at the same time.Now,I'm using BootCamp. I downloaded VirtualBox for "tranferring" Windows on it. Since I'm a new iOs user , what do I need to do in order to make work?
Do I need to un-install Windows from BootCamp,install VirtualBox and then install them again?
Any information would be appreciate it!
That should work to use OS X, you can run MS Windows using Virtual Box and use a seperate display for the Virtual Box window. That way you can run OS X and MS Windows simultaneously. However remember Virtual Box is freeware and not a commercial application like Parallels or VMWare Fusion and may not have the features of a commercial application. Support for Windows run in any virtualization application (Virtual Box, Parallels or Fusion) is not generally done on this forum as they are not OS X related. To get help on those apps you usually will need to go to their forums.
Remember IOS will not run on either OS X or MS Windows, it only works on IOS devices.
Good luck with your installation.
Similar Messages
-
Question regarding the "mcxquery" and "dscl -mcxread" commands:
Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
nullHow do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
con.commit();
} catch (Exception e) {
con.rollback();
} finally {
con.setAutocommit(true); //or:
con.close();
} -
Quick question regarding best practice and dedicating NIC's for traffic seperation.
Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc
-
Few questions regarding Oracle Scorecard and strategy management.
Hi,
I have following questions regarding Oracle Scorecard and strategy management:
1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
3. Does Scorecard and strategy management have ability to retain history on feedback and log of
entries i.e. date/time, user name?
4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
Thanks in advance for your help.bump.
-
Question regarding running parrallel system
Hi, i didn't know how to state my subject correctly, anywayz, here is my question.
I am going to buy an IMAC and a mini IMAC, and i really want to install window vista onto my apple computers. I know you can get the parrallel "thing" so that you can run mac and window at the same time. So my question is at what spec can both mac and window run smoothly at the SAME TIME. Mini mac only have 2.0 Ghz, so im reallie concerned, because i use a lot of window softwares and many softwares can only run by window and i don't want to switch on and off between mac and window either. So i really like to run mac and window at the same time.
please give your thoughts ^^
thank you
-JJiMac and Mac Mini; the software youa re talking about is Parallels, and their competition is VMWare, you also have the option of setting up your system dual-boot using Apple's BootCamp (but it will only run one OS at a time).
Parallels and VMWare will both run well on any current model of Mac. Vista doesn't really run very well on anything, and the Microsoft end-user license agreement prohibits you from using home versions of a Vista in a virtual machine.
One you've gotten around that and the problems with Vista and Vista's driver support, both Parallels and VMWare do a decent job. Microsoft suggests that you have a minimum of 1G of RAM to run vista, 2G if you want all the features of the Vista Aero UI. That's on top of the Mac OSX and virtual machine software requirements, so if you go the VM route you'll want 3G of RAM to run Vista (on the iMac, Mac Minis have a max 2G of RAM). The VM's 3D acceleration is OK on the iMac, but will be slower than direct-to-hardware (which you'd have under BootCamp). I don't know if the 3D hardware acceleration will work on the Mac Mini (it uses an Intel GMA 950 GPU).
Having used Vista, I'd say that at this point you'd probably be better off with XP right now, if possible. -
MOVED: question regarding CPU temps and latest bios (1.8)
This topic has been moved to AMD64 nVidia Based board.
question regarding CPU temps and latest bios (1.8)I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows) -
Question regarding Polling data from database using DB Adapters in BPEL
Hi,
I have the following question regarding Polling data from database using DB Adapters in BPEL -
If I am selecting data from multiple tables/view to ultimately generate hierarchical xml document, is there a way that I specify polling all of these tables/views. Is polling limited only to one table/view?
Thanks
RaviHi Ravi,
your question seems to have been answered for the question of polling a set of tables with one as the root, and getting back a hierarchical xml representing multiple related tables.
However you can also poll for changes to both the root table and its related tables. Not sure if this was your question or the one already answered. If the former please check out the sample
bpel/samples/tutorials/122.DBAdapter/advanced/polling/PollingForChildUpdates
Thanks
Steve -
Are there any issues regarding running Labview on Windows Vista
I am a cognitive psychology graduate student, and I am considering switching to LabView to display stimuli and gather RT data. I have previously used E-Prime for this task, but E-Prime doesn't seem to run well with Windows Vista. Are there any known issues regarding running LabView with Windows Vista?
Thanks
ChrisI've had no problems on Vista*. Only issue I've had was concerning how Vista uses fonts, but if you start on Vista and don't switch between XP and Vista, etc., then you'll be OK.
*no problems with LabVIEW's compatibility with Vista. Now, Vista in general, that's another story and not for this thread/forum.
Richard -
I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
Why after 6 year's this has changed?
I would like to open PDF's straight from Window Mail.Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark -
Hii, i got an iTunes card for $15 and only used $6 in it, but it say I only have $0.37 left. If any one could help me with this, I will be forever grateful.
You will need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
How to run jsp and servlet using JBOSS server
Dear Friend,
I have JBoss application server and Eclipse id
now i want to run JSP and Servlet but i am not getting the place where to place my servlet class file to run it .
before that i run jsp and servlet using tomcat5.0 but in that i place my servlet class in WEB-INF/classes folder and do corresponding entry in web.xml file and run it through browser.
now i want to use JBOSS how it is possible
PLZ Help meIs the servlet class defined in a package.? If servlet class package is servlets., copy the servlet to
WEB-INF/classes/servlets directory. -
My Aperture Keeps Crashing on Importing Photos and when Using Nik software HDR Pro
My Aperture has been Crashing everytime I import any Photos from Camera and when Using Nikk Software HDR Effects Pro...Sort This Out Please!
The exact steps I am taking are:
1. Start Aperture...wait till it loads and then connect USB to Nikon D300... Go to import...name project or image info.
2. Click Import all Selected and then Aperture comes up with Crash notification.
3. Send Error Report to Apple.
4. I have tried Belkin Card Reader...does the same.
5. I have used this Camera multiple times...and also a Nkon D7000 without any issues.
6. Both Cameras use Sandisk Extreme Pro Memory Cards...one uses Compact Flash and the other uses twin SD Cards.
7. I installed Nik Softwares HDR Effects...haven't been able to run it successfully as yet.
8. Nik Software support sent me details on Duplicate Arial Fonts...removed them as well.
9. I am running a NEW model iMac with i7 3.4Ghz with 16GB Memory with 256GB SSD... With a 2TB Internal Secondary Drive as well.Running OSX Lion 10.7 and I constantly check for and do all Updates as notified......is absolutely Frustrating.....just need to find a Solution. -
Questions regarding xft fonts, and awesome wm
Hi, I just tried ArchLinux yesterday and loving it!
I use JWM, but am very interested in dwm/awesome wm. I do have some questions:
1. On a thread in the forum, it is mentioned that dwm has no Xft support. How useful exactly is Xft? Would it impact on design work involving GIMP/Inkscape/Scribus?
2. Does awesome have Xft support?
3. I installed awesome, but I have no idea on what keys to use. The shortcuts are different from dwm. I tried to look for quick tutorial just to get the basics (dwm has one on their website), but seems like all documentation I found have none of that section and go straight to configuration.
Do I actually have to configure the wm before I can use it at a very basic level?
4. I would like to do some more comparison between wms, trying to find a good balance for me in regards of lightness and functions I need. However, I have no idea on what to use to keep track of cpu/memory usage for all the wms. What's a good way to do this?
Thank you in advance.Welcome to Arch!
1. The lack of xft support in dwm mostly just means that you won't get anti-aliased fonts in the status bar. Individual applications will still have the same font support they had before you used dwm.
2. Awesome uses pango for font rendering, which is even better than xft.
3. Look at the man page for default key bindings. It's more or less usable out of the box, but you will definitely want to customize it somehow.
4. A good system monitor is htop. Install it from the repos and run it from a terminal.
Last edited by fflarex (2009-02-23 18:44:45) -
Questions regarding *dump_dest parameters and fast_recovery_area
Hello,
I just installed a fresh new 11.2.0.2 Database on Solaris 10.
Everything straightforward on the parameter side!!! I tried custom install as well as general purpose template. When installing with DBCA, I set every parameters around DB Name in lowercase name.
With this, questions are popping in my mind regarding some parameters after installation.
First, %dump_dest parameters contains in path, two times the db name (ocpdb in my case):
background_dump_dest /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
user_dump_dest /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdumpIs it normal to have ..../rdbms/dbname/dbname/..... as path, with dbname/dbname ??? Why?
Second, the question regarding the directory structure under fast_recovery_area (new term for flash_recovery_area). The directory structure:
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l
total 2
drwxr-x--- 2 oracle oinstall 512 2010-10-28 19:53 ocpdb
drwxr----- 5 oracle oinstall 512 2010-10-29 07:44 OCPDB
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l ocpdb
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-10-31 21:09 control02.ctl
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l OCPDB/
total 3
drwxr----- 5 oracle oinstall 512 2010-10-31 03:48 archivelog
drwxr----- 3 oracle oinstall 512 2010-10-29 07:44 autobackup
drwxr----- 3 oracle oinstall 512 2010-10-29 07:43 backupsetWhy am I having a subdir with dbname in uppercase AND in lowercase? Should I specify dbname in uppercase at db creation to have all files under the same directory, or in lowercase? Or, is it normal?
I want to know how to do it well before reinstalling a fresh database.
Thanks
Bruno
Edited by: blavoie on Oct 31, 2010 6:18 PM
Edited by: blavoie on Oct 31, 2010 6:20 PMHi,
I just reinstalled all from scratch, everything in lowercase as well in environment variables and dbname in dbca:
oracle@enalab13:~$ echo $ORACLE_SID
ocpdbFast recovery area directories, dates prove that it's my fresh install:
oracle@enalab13:/u01/app/oracle$ ll fast_recovery_area/
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
oracle@enalab13:/u01/app/oracle$ ll -R fast_recovery_area/
fast_recovery_area/:
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
fast_recovery_area/ocpdb:
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-11-02 11:34 control02.ctl
fast_recovery_area/OCPDB:
total 2
drwxr-x--- 3 oracle oinstall 512 2010-11-02 11:24 archivelog
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 onlinelog
fast_recovery_area/OCPDB/archivelog:
total 1
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:24 2010_11_02
fast_recovery_area/OCPDB/archivelog/2010_11_02:
total 47032
-rw-r----- 1 oracle oinstall 48123392 2010-11-02 11:24 o1_mf_1_5_6f0c9pnh_.arc
fast_recovery_area/OCPDB/onlinelog:
total 0Some interresting output asked earlier in post:
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 4
Next log sequence to archive 6
Current log sequence 6
SQL> show parameter recovery
NAME TYPE VALUE
db_recovery_file_dest string /u01/app/oracle/fast_recovery_area
db_recovery_file_dest_size big integer 4032M
recovery_parallelism integer 0
SQL> show parameter control_files
NAME TYPE VALUE
control_files string /u01/app/oracle/oradata/ocpdb/control01.ctl,
/u01/app/oracle/fast_recovery_area/ocpdb/control02.ctl
SQL> show parameter instance_name
NAME TYPE VALUE
instance_name string ocpdb
SQL> show parameter db_name
NAME TYPE VALUE
db_name string ocpdb
SQL> show parameter log_archive_dest_1
NAME TYPE VALUE
log_archive_dest_1 string
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
SQL> show parameter %dump_dest
NAME TYPE VALUE
background_dump_dest string /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest string /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdump
user_dump_dest string /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/traceI think, next time, I'll install everything regarding oracle SID in upper case...
Maybe it's details that I don't need to care about... I seems that something is happening bad with the management of fast_recovery_area...
Thanks
Bruno -
Question regarding XI/PI and Idoc processing.
Hi,
I'm learning XI/PI and I have a question regarding Idoc processing in PI.
We need to configure communication between our BW system and our PI system using Idocs.
The Idocs are sent from BW to our PI systems and are then sent back to the BW system, there are no third system involved. The idocs are only between PI and BW.
Our BW system is already connected with many other R3 systems by using WE20 / WE21 and RFC's and everything works perfectly.
While I configure this communication between BW and PI it seems that PI is passing the Idoc to the Idoc adapter, converts it to xml and tries to find a receiver for the particular Idoc. I see the error "NO_RECEIVER_CASE_ASYNC" in SXMB_MONI.
Is this a normal behaviour in PI ? Why is PI thinking that the Idoc needs to be sent to another system when it is infact for itself ??
Thanks and regards
RemiHi
for error "NO_RECEIVER_CASE_ASYNC" in SXMB_MONI.
This problem may occur due to one of following reasons, so check
1 service is active in message? transaction SICF and activate service sap/xi/engine (right click, activate)
2 Is the port 8001 defined in the services on the smicm under services?
3 Check the roles assign PIDIRUSER
http://help.sap.com/saphelp_nw04/helpdata/en/56/361041ebf0f06fe10000000a1550b0/content.htm
role: SAP_XI_ID_SERV_USER attached to it
Also Check Whether PIDIRUSER has following role
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
Regards
Abhishek
Maybe you are looking for
-
iTunes will not update. I get an error message saying that it cannot verify signature and it will be unable to install.
-
I have loaner iphone 4, how do i get my itunes purchases on it
i have loaner iphone 4 that i want to put my itunes purchases on it; did not back up thru cloud on current i phone 4 i have that's in for service; battery won't charge
-
Mapping Multiple records from Db Adapter to the project data objects
If the database adapter do a query to the database and return multiple records, how can I map those records to the data object? And If I want to iterate the records and each record to invoke a sub-process, what can I do?
-
I can't get flash player 10.1 to work
Hello I know others have posted this question and they have got the right steps and answers to follow but this just will not work for me! I have Mac OS X Version 10.4.11 I have downloaded the uninstaller to uninstall the old version i had which was 9
-
how do we know when to use RAC, Oracle Streams and Data Guard Like in what cases we should use and what should we use