I got a replacment iphone 4 but it will not work for me please help??
i got a replacment iphone 4 but it will not work for me it has been charging for nearly 4 hours now but the screen still has the battery in the red and also will not connect to itunes is there something im doing wrong??
You'll have to get it serviced or replaced again, contact Apple, usually a replaced device is under warranty for 90 days as well.
Apple - Support - Service Answer Center
Similar Messages
-
I really need my phone fixed! ive tried connecting it to restore the whole device, it just wont work! I dont know what i will do if i dont have my phone!!!!
Hello there, morganbailey02.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro -
The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?
I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........
-
My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.
cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns. -
I am trying to download Java onto my Mac, but it will not allow me. Please help.
From where? What happens when you try?
Java (2)
Java 6 Enable
Java SE 6 Update 20013-004 -
Hi all can anyone help a man who knows very little about computers but is desperate for some help, i down loaded the new ios6 and lost all my data incuding my music, i just need to sync from my pc but it will not sync at all can anyone tell me what to do.
I have the same problem, since the update two days ago, appears when you always unlock the Apple logo and a loading bar (see file below). Have been three times all over itunes set to the factory settings and reload. Still the same. Now also in use, always on the screen with the Apple logo. Please help me, what's up?
-
I really need help, my ipod shows to connect to the WiFi but then it will not let me use the interent it says no connection but according to my screen i have WiFi connection, i am very confused an i would really appriciate it if someone could help me sort out this problem so i can start using my iPod for work again.
Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router. Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address. To correct this you can reboot your router by unplugging it from power for about 30 seconds.
It wouldn't hurt to also reset your iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting assistance.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock -
My iPhone 5 was working perfectly fine earlier. All of of sudden the screen started having black lines then went black. I tried to reboot it pressing the home buttons. Now the phone won't turn on at all. Any and all help will be greatly appreciated!!!
See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost..
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
More Info here > https://discussions.apple.com/message/19521062 -
When I try to access my iTunes from my second computer, I'm told I need to download iCloud. I did that, and when I sign in to iCloud, and enter my iTunes ID and password as directed, I receive a message saying that it is my correct iTunes ID, but that it is not the ID for iCloud. What do I need to do to access my music from iTunes on my second computer?
Click here and follow the instructions.
(98818) -
My iPod will turn on, but will not work at all. (please help)
ok i know about ipods, and this issue is not something that i have come across. when i plug in my ipod to my pc a screen shows on my ipod saying "do nto disconnect" i dont, i want until it is loaded. then the folder with a "!" pops up, and i read on www.apple.com that i am supposed to try the 5 w's, and i have tryed all 5 w's 3 times each. nothing works, nothing. when i click start and click all programs and go to ipod then i click ipod updater i cannot restore my ipod because a message pops up saying "The attached iPod model is not supported by this application." someone please help me.
Download and install the newest software if you have not already done so. See my post above for the links. After you have done this, try putting the iPod into disk mode and restoring.
iPod Updater 2006-03-23
www.apple.com/ipod/download
iTunes 6.0.4
www.apple.com/itunes/download
Putting iPod into disk mode:
http://docs.info.apple.com/article.html?artnum=93651
Restoring iPod:
http://docs.info.apple.com/article.html?artnum=60983
Best wishes,
CG
PS- What do you mean when you say it will not allow you to right click on it? FYI- Sometimes when there's something going on with your iPod's hard drive, it takes a really long time for the computer to respond to commands for it. So, if you're right clicking and then getting an hourglass, please be patient. You'll get there eventually. -
I have just got a replacement iphone 5 but I can't restore my old backup that is ios7 because the replacement is ios6 I have changed my UDID on the developer site but still no luck any suggestions anyone?
You are in breach of your Developer agreement by posting in a Public forum
-
I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?
chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?
You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894) -
The keyboard for my iMac 9, got wet and is not working correctly. Delete ,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I can't login due to all caps and numbers being symbols. Is there anything I can do?
Buy a replacement keyboard. They're only $50-65 USD.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2
Maybe you are looking for
-
In general we really like our new Officejet, but we're very frustrated by the automated start up procedure. Every time we turn it on it does a self check and then cleans the print heads. It's bothersome for two reasons: 1) We want to print quickly,
-
ERROR WHILE SENDING REPORT THROUGH EMAIL .....
DEAR ALL i have one problem . i am trying to send my report through e-mail.i am working with forms 5.0 and report 3.0 . i am calling report from form.when a client click on the button a report will be generated and this will be send to a specific per
-
Building and Deploying Within a Directory with oc4j 10.1.3
hi, I just want to move our application from 10.1.2.0.2 to 10.1.3 in our development environment. I want to deploy our application within a directory, but this does not work anymore! I couldn't get information about this in the documentations. When I
-
Importing iphoto 09 pictures into imovie 09 with ken burns movement!
Im making a video on imovie 09 using still images i took and imported to iphoto. Then i import those iphoto pictures into imovie, BUT all the pictures have moving "ken burns" crop effects on them after i import them to imovie!!! i know how to fix it,
-
[SPA 3102/SPA 2102] under PPPOE hangs...
Hi, We've got several hundreds Linksys voip adapters connected to our LAN via PPPOE accounts. Some of them (mostly SPA2102 but also SPA3102) hangs from time to time. Our PPPOE server shows that they are connected but they don't respond to ICMP packet