I got an error during the ios upgrade (ipod touch 4g)
i have to upgrade my ipod touch, i started download ios from itunes (yah, it's the last version) and then it started installing.
first time there was ERROR 2002 (I HAVE WINDOWS XP)
i clicked OK and then it started to install (why did it start with the error?!?)
there was a different one.. (didn't get the number )
and now my ipod have the apple logo and an empty loading bar who are not going.
(TRYED TO RESTART THE PC
TRYED TO CLOSE THE IPOD (but nothing happen) )
i'm waiting the battery goes out and then retry to put it on itunes.
PLEASE HELP ME IF YOU CAN
P.S. ITUNES DO NOT SEE MY IPOD NOW
P.P.S. sorry for my english, i'm italian
Here's what your error can be about, copied from http://support.apple.com/kb/TS3694
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Try to connect in recovery mode after you checked your security software settings and USB ports. iOS: Unable to restore
Message was edited by: Ingo2711
Similar Messages
-
Error in the updating of ipod touch
hy!,
I have a Ipod touch, (old version) and i've wanted to updating it with the 2.1 version, which is not free! I've downloaded it but when i try to install it on my Ipod, it make an error and close I tunes!! Does anybody have the same problem?? or the solution??Hey guys,
Try disconecting and restarting your iPod touch. worked for me. This article was how I found out about it.
http://www.apple.com/asia/support/ipodtouch/troubleshooting/ipodtouch/#
Hope it helps.
Symply... -
I upgraded the ios my Ipod touch 4th gen from 4.2.1 to 5.1.1.
I accidently switched on the wifi sync. Since then, neither my itunes nor my windows 7 pc has been able to detect my ipod. It only charges when i connect it with the cable. Ive tried everything given on the apple website. Please help
You tried everything here:
iOS: Device not recognized in iTunes for Windows
Did you try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Try another computer to help determine if you have a computer or iPod problem. -
ok so I was getting the IOS 7 update and when i got it, it had an error during the download. so now it says if i want it to put it in restore mode, if i do will my ipod loose everything and if it does will i get it back
I went back to iOS 7 and my backup file is restoring but when its done nothing is on my phone still and only takes 11-15 minutes to restore the backup instead of taking 25+ minutes like usual so I guess the backup is corrupted. How can I fix this?
-
I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50). How do I fix this?
Try restarting everything and then try to sync or reactivate. Quit iTunes, reboot your computer, reboot your iPad and then try again.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Error during in place upgrade of IPAM (W2k12 to W2k12 R2) - any solution yet
After an in-place upgrade of an IPAM server from W2k12 to W2k12 R2 and during the IPAM upgrade from ver 6.2.0.1 to ver 6.3.0.1 I receive an error:
Failed to convert Schema
The given key was not present in the dictionary
Please restart the wizard to update the IPAM server
The error.log at %windir%\WID\log has an entry of:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE' Reason: Could not find a login matching the name provided
I've installed sql express mgmt studio on another lab IPAM server and don't see any db server logins for Network Service so it's not a surprise that the login would fail.
I have seen other mentions of others getting this error with the reply that this is a known issue and a hotfix is on the way. Is this a known issue and is there a hotfix - or some other fix - available.
In a related note, is there any official technical documentation re: the IPAM upgrade process such as an Operational Guide or something similar? All I have been able to locate are marketing type of documents that extol the new features in IPAM ver 6.3.0.1
but I haven't located any technical documentation.
ThanksThat's sadly funny. The hotfix leads to a different error. Thankfully I'm not an end user of IPAM - which seems to me not ready for prime time and not worth the trouble. The overlapping scopes was one of the issues for me that was preventing
a successful upgrade in my dev environment, which is nonsensical since an overlapping scope is a failover scope which is one of the selling points of wk212 r2 dhcp which IPAM is supposed to work with. As I recall you can't have reservations either.
My prod environment, I didn't have any overlapping scopes and got rid of all reservations and the upgrade still failed so I ended up removing the IPAM feature and doing a fresh install using the WID db and then migrating to SQL using move-IpamDatabase
(I couldn't get using a remote sql db to be seen during a fresh install thus the WID then migrate).
Hopefully, the end users will tire of the limited functionality of IPAM and it'll fade away here and I won't have to deal with it much longer. -
Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.
Error changing modules | Lightroom
-
In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture. Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup. How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Error during the retrieval of the logon data store Message was Not Created
Dear Gurus,
I got this error while creating support message.
Error in Local Message System: Error during the retrieval of the logon data store Message was Not Created
Message no. BCOS088
Wether this support message will be send to SAP Support or internal sap support team in an organisation.
I am new to SAP BASIS. Kindly explain clearlyPaste the entires from BCOS_CUST table
Regards
Nick Loy -
There was an error during the save process
Hi All,
When I try to save the data in a form, I got the following error but data was saved. Remaing forms are saving the data without any error.
There was an error during the save process
I found the log
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:30 PM]: Rebind at: Sat Jul 04 16:24:30 GMT+03:00 2009
[Jul 4, 2009 4:25:30 PM]: Rebind at: Sat Jul 04 16:25:30 GMT+03:00 2009
[Jul 4, 2009 4:26:30 PM]: Rebind at: Sat Jul 04 16:26:30 GMT+03:00 2009
[Jul 4, 2009 4:27:30 PM]: Rebind at: Sat Jul 04 16:27:30 GMT+03:00 2009
Thanks & regards,
Sravan Kumar.Hi John,
I customized the standerd Transfer BR according to my requirement. And I am using the customized form.
I tried to change the Action in (Action is smart list) in the form, it is getting saved but with the error There was an error during the save process.
My requirement is Action updated through BR only. But it is not updating. Previously the same BR worked fine.
Is there any relationship between the error and the Action was not updating?
Thanks & Regards,
Sravan Kumar.
Edited by: Kumar1899 on Jul 6, 2009 6:29 AM -
ORA-20001 GET_BLOCK-ERROR during the installation of an application
hi people,
I' ve got the following error during the installation of an application in apex 2.2.
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02047: cannot join the distributed transaction in progress <pre>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;</pre>
Can anybody help me?
Message was edited by:
user512746hi,
db-version is oracle 10g r2
os windows server 2003
the error occured when two ore more people working in their workspaces but not when only one person working in his workspace
Message was edited by:
user512746
Message was edited by:
user512746 -
HT4623 i got 3004 error while installing ios 7 , how to fix it ?
i got 3004 error while installing ios 7 , how to fix it ?
I was trying to update my iphone 5 to IOS7 and couldnt do it for 5 times then I did the following and was able to update it right away
Clearing your DNS cache may resolve the issue and enable you to connect to the iTunes Store.
The easiest way to clear your DNS cache is to shut down your computer completely and then restart. If you can't shut down, you can clear your DNS cache manually.
Click Start and choose Run.
In the dialog that appears, type “cmd” (don’t type the quotes) and click OK.
After the DOS prompt (C:\), type “ipconfig /flushdns” (without the quotes) and press Enter. Make sure you enter a single blank space after “ipconfig.”
Let me know if it solved the issue for you -
I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?
Rentals can only play on one device/computer at a time. Have you tried to play on the computer and still have that window open?
Have you transferred the rental to iPod/iPhone or iPad to watch?
If it won't play anywhere contact iTunes support at:
expresslane.apple.com
AC -
I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?
try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.
-
RSA1 Error during the retrieval of the logon data stored in secure storage
Hi Gurus,
when i go and check Source system the connection is OK, and RFC's from BI to R/3 and R/3 to BI is OK (including Authentication).
but when i go and check Info provider there one customized object ZDTSYS01 is there when i check and and activate it it is giving error as below.
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZDTSYS01
Creating Export DataSource and dependent Objects
The creation of the export DataSource failed
Reading the Metadata of ZDTSYS01 ...
Creating DataSource 8ZDTSYS01 ...
Error during the retrieval of the logon data stored in secure storage
Error during the retrieval of the logon data stored in secure storage
Error when creating the export DataSource and dependent Objects
Program ID DC4B105KR4QT1KDW9HD7AXYEO retrieved for DataStore object ZDTSYS01
Error when activating DataStore Object ZDTSYS01
Deletion of Unused Dictionary Objects ( 3)
please help me solve this issue
Thanks in advance
venkatHi,
1). Looks like SM59 Remote user has some issues. Can you check whether the user's are locked ?
2). You can also correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
3). Please click on source system and restore the BW source system
Please check the below 2 SAP Notes.
538052 and 644015.This might solve your problem.
Thanks,
Arjun
Maybe you are looking for
-
Vga standard graphics adapter driver update
Hi does anyone know where I can find an updated VGA standard graphic adapter driver.? or what make it is?My young one is trying to play Roblox but keeps getting a message that the driver needs to be updated.Also if it is possible to install an other
-
Syncing Ipod to a new computer
Hello all, I have recently purchased a new cpu, and i have downloaded itunes, the problem i am having is that i want the 110 songs that are currently on my ipod, to be placed on my new cpu in itunes. All i can do is on the new cpu is transfer but it
-
All, Where we can do the tolerance limit settings ,for blocking payment for a particular invoice if the value is exceeding certain amount . If I am doing this setting whether this will give error message or just blocking for payment .? Kindly advise
-
Soundbooth CS4 Problem with Quicktime MOV files
I know that Soundbooth CS4 should support Quicktime MOV files but I just get a placeholder image and the video doesn't play. What should I do? I don't know if it is an issue with Quicktime or with Soundbooth. Thanks, Bruce
-
Hi, i manage to get my program to record. for example few days again when i play an mp3 windows media player, my program records the music with my microphone. it is fine by me. But BUT now all of the sudden my program does not record my music from wi