I got an error on the hardware test how do i fix it Oxa9f7b718

PLEASEEEEEEEEE HELP ME

I have never heard of this error and can't find any information on it. I suggest you follow Linc's advice and make an appointment at the Genius Bar and have them take a look. There is no charge for looking.
cornelius

Similar Messages

  • HT4759 i got an error to restore my iphone how can i fix it

    i got an error to restore my iphone how can i fix it

    What for an error? We need some more information about your problem.

  • How do I access the hardware test, How do I access the hardware test

    08 MacBook with newest Lion. Is there a startup that allows me to access the Hardware test? Don't have disks with me.kk

    Command D will do nothing. Option d will load the Internet version of AHT but that will not work on a 2008 MacBook.
    Booting while holding the d key is not likely to work either, since Lion tended to erase AHT on the boot volume.
    AHT must be run from your Mac's original Applications Install DVD. It can also be reinstalled on the boot volume, if desired.

  • Got this error after doing hardware test 4MOT /4/ 40000003: HDD-1222

    Got this error 4MOT /4/ 40000003: HDD-1222. After login screen goes white and constantly trying to load and goes no further.

    Hard Drive temp problem. Could be the drive, could be the fan, could be the connection between the drive and the logic board.
    Did you just change the HD in the system?
    If the system is under warranty or Apple Care get it checked out.
    You could try an SMS reset  Intel-based Macs: Resetting the System Management ... but it is unlikely to clear this.

  • My Powerbook boots up every few times and the hardware test still gives me -9972 error

    René O'Deay wrote:
    My Powerbook G4 15" aluminum 1.67Ghz 10.3.9 Panther won't start up.
    (I did a backup on an external drive not long before it failed)
    have gotten lost in my research on apple forums and knowledge base.
    From the original install discs:
    The Hardware test gives the error.
    "2STF/8/3 ATA-100 ata-6-Master (-9972)"
    The Disc utility does see my harddrive but fails to repair with the messge:
    1 volume cannot be repaired,
    'Invalid  node Structure'
    Disk 'no valid packets (-9997)'
    I do have a useless partition from TechTool 4 and had successfully run the programs just before Powerbook failed.
    aid everything was ok, with no warnings.
    found somewhere a link to a hardware test code list, that said 9972 could be the cable (ribbon?) to the drive needed to be reset, replaced, or the harddrive replaced.
    our local New Orleans 'official' Apple Tech guy calimed it was the harddrive and not worth replacing.  he whined that it would take hours, tho the guys on ifixit claimed only half an hour.
    i have since got a refurb MacBook (even older it turns out) with Tiger, but I miss my 15 incher Powerbook. (on very tight budget)
    the battery got zapped by lightning last year and have struggled with it ever since. it won't fully recharge.
    Right now have got it on the AC without the battery to try to charge the backup battery.
    I have managed to restore it several times after crashing, inspite of my tech guy claiming otherwise. but have never really opened it up besides just looking at the memory slots. just one filled with 512 card.
    so any advice, or suggestions.
    I've been messing with my Power book for like 10 hours and finally finished replacing the hard drive. (just installing the software and all the updates took almost 2 hours by itself) Now it boots up every few times and the hardware test still gives me -9972 error.
    <Re-Titled By Host>

    My friend. Do not despair.
    Firstly, you have a backup. Kudos.
    Secondly, i suspect the hard drive in the machine is more than just a few years old. Hard drives die. I suspect the hard drive is the issue, not the cable.
    Thirdly, it is worth changing the hard drive and take the ifixit advice. Simple to change. If it will be your first time changing the hard drive, just be organized and follow the steps carefully.
    Now, before we decided it is the hard drive we need to confirm this.
    I would check if SMART reports favorable conditions for the drive. Disk utility can tell you.
    If good then I would zero out the drive. This allows the drive to excercise every sector and will build confidence of a well prepared drive going forward.
    You can then restore from backup.
    The other option is to replace the internal HD with a new one, perhaps with more storage.
    As an FYI, I replaced the drive on my powerbook G3 and it's faster, quite , has more storage and gives me some peace of mind. Worth the money. The little guy runs beautifully. 
    Sent from my iPhone

  • How do I find out what an error code found on running the hardware test, means?

    After running the hardware test on my Mac Pro I got an error code of: 4HDD/11/40000004: SATA (4,0)  --  HOW DO I FIND OUT WHAT THIS MEANS?

    It means your one of your SATA Hard drives is having trouble (or possibly your DVD drive, but not likley).
    Got good backups? Now would be a good time to try to make some if you don't.

  • I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red-keys out of order, and --Volume corrupt, can't be repaired.  I tried

    I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red…keys out of order, and ……Volume corrupt, can't be repaired.
    I tried to do a system install, but message said…disk can't be changed. Will a complete erase and install fix this ?
    Everything is backed-up.

    There's hardware and software.
    Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes).  The directory that keep track of files is corrupt.  Disk Utility can help determine if that is the issue.  In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that.  You have to boot from another drive.  Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
    A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case.  Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
    In your situation it does sound serious and not just minor directory corruption.  You can try erasing (formatting) the drive,  You may need to do this if it is really corrupt, in which case there could be underlying physical issues.  I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation).  This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data.  If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format.  Then you know you need a new drive.

  • I received an error message from the hardware test (4SNS/1/40000000:TCOP-85.875). Anyone know about this?

    I received an error message from the hardware test (4SNS/1/40000000:TCOP-85.875) Anyone know anything about this? Problem is that discs will not load.

    Reset PRAM and do the hardware test.
    Reset PRAM.   http://support.apple.com/kb/PH18761
    Contact Apple.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • Error in license check - Error getting the hardware key

    Hello,
    I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
    but I still have a issue to log on, message : "error in license check"
    I try everything I found in forums, I have tested the license, see the trace below.
    I checked too files dev_w*
    It seems there is a problem with server message
    I checked in "dev_ms" file, but nothing has been wrote inside.
    Please could you help ? maybe someone met the same issue and solved it.
    Thanks
    trc file: "dev_slic", trc level: 2, release: "700"
    Test license for SAP SYSTEM: N4S
    rdisp/mshost: n4shost
    rdisp/msserv: sapmsN4S
    MsIAttachEx: connect to n4shost / sapmsN4S
    NiIInit: allocated nitab (2048 at 0xb72fa008)
    NiHsLInit: alloc host/serv bufs (100/100 entries)
    NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
    NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
    NiHsLGetServNo: got service name 'sapmsN4S' from operation system
    NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
    NiICreateHandle: hdl 0 state NI_INITIAL
    NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
    NiIBlockMode: set blockmode for hdl 0 FALSE
    NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
    NiHsLGetServName: found port number 0E.11/3601 in cache
    NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
    ***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
    ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
    "dev_slic" [noeol] 26L, 1378C 1,0-1 Top
    dev_w8
    M Wed Oct 19 11:46:48 2011
    M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
    M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
    M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
    M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
    M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
    M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
    M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
    M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
    M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
    M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
    M
    M Modeinfo for User T8/M0
    M
    M tm state = 2
    M uid = 9
    M term type = 0x2
    M display = 0x0
    M cpic_no = 0
    M cpic_idx = -1
    M usr = >SAPSYS <
    M terminal = > <
    M client = >000<
    M conversation_ID = > <
    M appc_tm_conv_idx = -1
    M its_plugin = NO
    M allowCreateMode = YES
    M blockSoftCanel = NO
    M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
    M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
    M imode = 2
    M mode state = 0x42
    M mode clean_state = 1
    M task_type = ZTTABTC
    M lastThFc = THFCBTC
    M lastAction = TH_IACT_NO_ACTION
    M th_errno = 0
    M rollout_reason = 0
    M last_rollout_level = 7
    M async_receives = 0
    M cpic_receive = 0
    M em handle = 2
    M roll state = 2
    M abap state = 2
    M em state = 3
    M eg state = 1
    M spa state = 3
    M enq state = 0
    M softcancel = 0
    M next hook = T-1/U-1/M255
    M master hook = T-1/U-1/M255
    M slave hook = T-1/U-1/M255
    M debug_tid = 255
    M debug_mode = 0
    M mode type = 0x1
    M debug = 0
    M msg_count = 31
    M tcode = > <
    M client conversation_ID = > <
    M server conversation_ID = > <
    M lock = 0
    M max enq infos = 0
    M act enq infos = 0
    M em_hyper_hdl = 0xa665a3b0
    M plugin_info = NULL
    M act_plugin_hdl = -1
    M act_plugin_no = 0
    M max_plugin_no = 0
    M async_receives = 0
    M vm = no VM
    M
    M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
    M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
    L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
    L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]

    Hi,
    As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
    As you found in the dev_ms trace, the port 3601 for message server is not accessible:
    NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
    ***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
    ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
    Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
    Regards,
    Srikishan

  • Can I run the hardware test when I have four different accounts on my mac 10.8.4, can I run the hardware test when I have four different accounts on my mac 10.8.4

    Hi  Noticed that the top of my mac is nearly too hot to touch.  Did a search online and found out about the hardware test.  Looked up online user manual for my mac (Processor  3.06 GHz Intel Core 2 Duo 10.8.4) and noted how to perform the test.  However, when I keep my finger on the D button through start up it just brings me right to the screen where I have to sign in to my desktop account (there are four accounts on the desktop as it is a family mac).  Am I doing something wrong.
    Car

    Welcome to Apple Support Communities
    First, you should know that it's normal that your iMac is hot at the top. Here are the fans, so it's normal that it's hotter than other parts. Before going further, download Temperature Monitor and tell us which temperatures it indicates > http://www.bresink.com/osx/TemperatureMonitor.html
    If it gives dangerous temperatures, then you should run Apple Hardware Test. Looking at the processor the Mac has got, your Mac came with DVDs. Apple Hardware Test is in Mac OS X Install Disc, so insert it and hold the D key while your Mac is starting to start in Apple Hardware Test

  • HT201257 How can I run the hardware test when my USB ports and bluetooth doesn't work?

    The USB ports and the Bluetooth suddenly will not work on my Mac Mini (2008). There is very little I can do except using Remote Desktop. To run the Hardware Test, the D key has to be pressed during startup. I got no key to press. Is there any other way to do this?

    Sorry, focused on bluetooth issue. If USB and bluetooth are knackered, try an SMC reset:
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.

  • Is the mac mini g4 spost to come with the hardware test disks?

    Hi,
    Is the mac mini g4 spost to come with the hardware test disks?
    If so how do I get them?
    I did not get it when I got my mac mini?
    Thanks.

    I know that booting up while holding the D key with the Install disc in the drive will boot to the Apple Hardware Test on a Macintel, and although I haven't tried that key on my G4 yet, I believe that the proper way to select AHT as the startup volume from the Install disc is to do so from the Startup Manager (which is accessed by holding the Option key during startup) ...

  • My Intel iMac only shows a blinking folder with a question mark when powering it up. What can I do besides running the hardware test of the original installer disc.

    My Intel iMac only shows a blinking folder with a question mark when powered up.
    I did run the hardware test of the original installer disc and no trouble was found and I am out of options. Does anybody have any advice what to do next

    If the drive shows errors then repair, if after the 3rd pass of Repair Disk in Disk Utility it still shows errors it's telling you it's time to be replaced. Take it to your local Apple Store or AASP for repair, when it comes back use your backup (either Time Machine or bootable clone) to restore so you can pick up where you left off.

  • Recently tried to update iTunes 12.0.1 and got this error message:  The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.

    I recently tried to update iTunes to 12.0.1 and got this error message:
    The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
    After that, I get:  iTunes did not install properly.  Reinstall iTunes.
    I tried downloading iTunes again (without uninstalling it) and it won't download.
    Any suggestions?

    Thanks so very much, I have been looking for an answer to this for
    almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
    I must have installed deleted everything in order at least 15 times
    Is there anyways this cane get pinned to stay at top as it works and save people ploughing
    through post after post which is just asking the same question.
    Off to back up and I Cloud back up and see how it works without sidebar
    again thank you

  • HT5538 Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password

    Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password, the problem happens also with iMessage . Please help

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

Maybe you are looking for