I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.
I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...
Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
Similar Messages
-
ITunes will not recognize my new iPhone 4
I just got an iPhone 4 from Best Buy today. Everything has worked fine throughout the day until I tried adding my music on to my phone. I have an iPod Nano that has worked fine with my computer in the past, always synced smoothly when needed. When I try syncing and adding music from my iTunes to my iPhone, iTunes does not recognize my iPhone at all. It does not show up under 'Devices' in iTunes. My 'Computer' (Windows 7) recognizes the iPhone as a device, but nothing in iTunes. I've updated my iPhone software, uninstalled all Apple programs, and reinstalled all of them back on to my computer, with no luck.
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
Itunes does not detect my new iphone 5
My brand new iphone 5 is not recognized by either windows or itunes? Any ideas?
Sorry . . . Yes. I did already update to latest itunes.Did you update iTunes? 10.7 is required for iOS 6 devices like the iPhone 5.
-
HT4515 My car does not recognize my new iPhone for Bluetooth set up
WHere can I find instructions for connecting to bluetooth
For the iPhone end:
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
For your car, see your owners manual. Each device is slightly different. -
How can I
Not possible, there is a physical switch inside the headphone port, when the headphone jack is plugged in the switch is open and disables the iPod speaker and Bluetooth networks. Cheers.
-
My child's iPod touch is locked. No one knows the password. I have tried connecting to iTunes but since itouch is locked, iTunes will not recognize It. How do I unlock the itouch? The hard reset does not work either.
iOS: Unable to update or restore
-
After downloading iOS 6 ipod is flashing apple and itunes does not recognize
I tried to download the new iOS 6 for my ipod and now the screen is just white when I tried to reboot it, now it flashes the apple and white screen and itunes does not recognize it. help?? it is only 8 mos old
- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store. -
Itunes will not recognize my new Ipod Nano
It will charge but my computer says a driver needs to be installed but it cannot find it and iTunes does not recognize it at all. Any help?
Okay. Maybe they're looking for the usbaapl.sys driver as well.
Try to bring the Hardware wizard up again. This time browse to:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
... and select the usbaapl.sys file.
Any better luck with that one? -
MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?
Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated.
ThanksThank you so much. Guess i just have to upgrade now.
-
Have a PowerBook G4 with software 10.4.11 and iTunes 9.2. Got a new iPhone 5 - and seems iTunes does not recognize it. What kind of software update(s) do I need?
None. An iPhone 5 requires Mac OS X 10.6.8 or newer to be synced from a Mac, which is above the maximum for a PowerBook G4(10.5.8.)
(79516) -
I "Erased all content and settings" and now my iTunes does not recognize my iPhone when I plug it in. Plus my iPhone is stuck with the apple symbol on it and wont do anything. what did I do? How do I get my phone to work again?
Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually takes about 10 seconds time. If still problem. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.
-
My old computer is spoilt. so i bought a new one. now when i try to sync my iPodtouch with my new computer it says "do u wanna erase" the things on my iPod. i clicked NO. but i really wanna update my iPod to io5 but i can't as i dont want to lose my stuff
Before you restore the iPod from the backup that Dave had you make yu have to transfer stuff from the iPod to the computer since the backup does not contain the apps themselfes, music, synced phots and some other stuff. To see what a backup contains see:
http://support.apple.com/kb/HT4946
To transfer iTunes purchases:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- For other stuff you need a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support CommunitiesA lot of thos are paid, especiall for more than a limited number of items. It is harder to find one that does synced photos. -
The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library. Now getting synch must erase setting! Help
well nobody bothered to give me a hint on what to do, maybe because the problems with the new version of iTunes are really a lot, there is an enormous amount of people out there that have all sort of different problems including mine so I have decided to return to the previous version which works fine and wait untill the apple people come up with a decent product ....
-
Apple TV does not recognize my Apple account username (email) and password, but iTunes, my iPad and iPhone does. I have rest my password three times, same results.
ATV says my computer is not authorized, but i-Tunes says it is.
I have i-Tunes open on my computer and have entered i-Tunes store, ATV says it can't access the store. Both on the same network!
I am so frustrated with this system! All these problems with Apple TV are not the end but the beginning.
In i-Tunes, songs are lost when they have not been moved. I lose whole albums I have ripped from CDs to iTunes
An audiobook book in two files are in the library but only one file is recognized by iTunes when I try to play it or transfer it to my iPhoneI Am having the same issue. Ie on the password issue.
I Am using a Macpro though.
i Have had no issues with the setup until recently.
However I think the hard drive is starting to fail as it keeps on losing the wireless connection and gas been stuttering a lot on playback.
Maybe you are looking for
-
In Nautilus, mounted network shares not showing up right away
I've noticed a strange problem recently (last couple of weeks) where my mounted network shares don't always show up right away in Nautilus (side bar or desktop- like they used to). For example, if I manually mount an NFS share in CL to /media/files i
-
SQL 2012 Report Builder + UAG
Quick description of setup: I have 4 total SharePoint servers, 2WFE's, 2APP's, and a SQL Cluster. I am using SQL 2012, + I have installed the reporting services add-in for SQL 2012 and have gone through the entire setup. Everything works, KCD, sto
-
T61 - Brightness always set to maximum after reboot on Vista
Hi all, I was wonder if anyone has this problem before. When you are logging onto a user account in Vista, first the brightness of the current powerplan takes over the brightness. Then the brightness goes to maximum a little bit after (it seems like
-
Hi Can any one provide me with Plant maintenance material.... Thank you
-
I'm in the early stages of writing a client-server program. I've got the client and the server communicating (I think). I send text from the client to the server. I then want the server side BufferedReader in to be read into a variable. I've tried do