I got an ipod nano 6th generation will an ipod touch charger work

Iv got an ipod nano 6th generation 16gb and well woundering if a ipod touch or normal ipod charger will work on it

Yes it will I have done it many, many times

Similar Messages

  • HT1459 MY IPOD NANO 6TH GENERATION WILL NOT TURN ON I GOT IT FOR CHRISTMAS AND PLAYED THE RADIO ON IT WITH OUT PLUGING IT INOT ITUNES AND I WAS WONERING HOW TO FIX IT ?

    hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes

    Hi meganisawsome,
    If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
    Apple Support: Charging your iPod battery
    http://support.apple.com/kb/HT1384
    If you are still having issues after charging, you may want to look at this article:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Regards,
    - Brenden

  • My ipod nano 6th generation will not turn on.

    My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?

    Hey s.mccarter2010,
    Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPod won't turn on
    If you have tried the solutions above and iPod still won't turn on, check the following:
    Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
    Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
    Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
    If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My ipod nano 6th generation will not work connected to my car radio?

    my ipod nano 6th generation will not work connected to my car radio? My wife's ipod nano 4th generation works perfectly.

    Hey CorineNL,
    If your iPod not recognized by iTunes or computer, I would follow the directions here:
    Follow this troubleshooting assistant.
    Also see these articles for further assistance:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod not recognized in iTunes and Mac desktop
    from: iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • Ipod Nano 6th Generation will not turn on.

    My brother bought my mother the new Ipod Nano 6th Gen as a gift yesterday. We plugged in to charge (like the instruction booklet says) and found the Ipod wasn't turning on. Everything on the computer and syncing side works. We managed to register the Ipod and everything like that but when it comes to controlling the actual Ipod, it doesn't seem to be working.
    I have tried resetting (Volume Down Button + Sleep/Awake Button) it but still nothing.
    The repairing Ipod has been cast on me which is unfortunate because my mother doesn't take things breaking very well and I would rather sort it out for myself than have to hike up to my nearest Apple Store for the Genius Bar to look at it.
    I would like to know if this is a problem with the screen or with the actual power in the ipod.
    The tiniest of help and I would be very greatful. thanks,
    Ross Jordan.
    ps. it has been charging for a good 3/4 hours now.

    If you do a restore on it from itunes on your computer and it still does not work....then it's a defective unit and you'll have to take it in for an exchange.
    Try to restore first before taking it in.
    Here is how you do it:
    http://support.apple.com/kb/HT1339
    Good luck!
    M.

  • Nano 6th generation will not turn on but works when plugged in to itunes?

    My son got a nano 6th generation for christmas 2010 and brought it to me the other day because the screen would not turn on. I plugged it into itunes and it was there, all songs were still on it. I tried to trouble shoot the device after unplugging it by holding down the negative volume button and the sleep button for 10 seconds. I repeated the steps but nothing happened. I plugged it back into itunes and restored the device to original settings. Still no display. Will Apple exchange the device if it has not been 12 months since date of purchase? Please advise. I am at a loss.!

    Since your iPod is still under the 1 year warranty against manufacturer defects, I would take it in to your local Apple Store/Genius bar and see if they'll replace it, which they should as long as they determine the cause its not from accidental damage or use.
    B-rock

  • My ipod nano 7th generation will not hold a charge

    i plug in my ipod to the computer. it syncs just fine and looks like it is charging. However, as soon as i unplug it it dies. it seems to not be able to hold a charge.

    Hi raf996,
    If you are having power related issues with your iPod nano 7th Gen, you may find the troubleshooting steps outlined in the following article helpful, including service if necessary:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    Regards,
    - Brenden

  • My iPod nano (6th generation) will not sync because of Error 13019.

    Why won't my iPod nano sync? Error 13019 keeps showing up. I've tried to sync over and over. Help me!!

    See here: iTunes: Error 13019 during sync
    Some users have had luck by rebuilding their iTunes library.
    iTunes: How to re-create your iTunes library and playlists
    B-rock

  • My ipod nano 6th generation will only play one song

    Whenever I hit the next button it will go to a new screen as if it will play the next song, then quickly flash through all 37 of the songs, and eventually end back up at the first song. I have tried restoring and it is updated. Don't know what else to do. It is extremely frustrating.

    Hey s.mccarter2010,
    Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPod won't turn on
    If you have tried the solutions above and iPod still won't turn on, check the following:
    Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
    Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
    Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
    If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My iPod Nano 6th generation will not turn on when off of the a power source. I've tried to restore it, but that didn't work. Any suggestions?

    I also tried holding the sleep/power button along with the minus button to reset it and that did not work either. Any help would be great, thanks.

    If you update the iPod software to the latest version (1.1) you should be able to power off the iPod. If that doesn't work especially since you restored it's most likely a hardware issue with the iPod. If so, contact AppleCare or visit an Apple Retail Store so they can setup a repair for you.

  • My iPod nano, 6th generation, will not stop playing and none of the buttons will work

    I listen to audiobooks.  My iPod was fine, I just checked how far I was in this chapter.  I checked again 2 minutes later and I cannot get the screen to lite up nor can I control the volume.  But my book continues to play.  I plugged it in to charge with a wall charger, nothing.  I plugged into my computer and again nothing.
    It is only 3 weeks old, I use it about between 1-3 hours a day.
    Anyone else have this problem?

    Have you tried resetting it by pressing and holding both the Sleep/Wake and Volume down buttons together long enough for the Apple logo to appear.
    B-rock

  • My Ipod Nano 3rd generation will not hold a charge.

    I tryed to cord and left the nano charging for a day and as soon as i use it the battery is dead with in minutes.

    Given that the Nano is more than a couple of years ago, it's likely that the battery is nearly shot and in need of replacement either by Apple, a 3rd party service center, or yourself if you feel up to the job.
    Not much else you can do for troubleshooting this one. Sorry.
    B-rock

  • IPod Nano 6th Generation Not Charging/Holding Charge

    Hi.
    My iPod Nano 6th generation will not charge or hold a charge. I plug it in and it will turn on for about 30 seconds or less and then die. It will then continue to turn on and die unless I unplug it in which case it will die and not turn on. Any advice/suggestions and/or help finding what is wrong would be greatly appreciated. Thank you in advance.

    hold down the enter button for 5 secs then plug into wall while still holding it down.

  • My iPod Nano 6th gen will not restart?

    My iPod Nano 6th generation will not start, after being recharged, My PC doesn't recognize it and it's screen doesn't alight,
    can anyone help?
    greengra55

    If the solutions found in the article iPod not recognized in 'My Computer and in iTunes for Windows, take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you. 

Maybe you are looking for

  • Best Practice for ASA Route Monitoring Options?

    We have one pair Cisco ASA 5505 located in different location and there are two point to point links between those two locations, one for primary link (static route w/ low metric) and the other for backup (static route w/ high metric). The tracked op

  • Large attachment in mail stalls the application. Please help!

    I accidentally tried to send a 10mb email. I realized the issue immediately and tried to delete the email from Outbox, which didn't show up till later. And when it did I deleted the large email in the Outbox. Or so I thought. Next, my Internet got kn

  • How to automate the process of converting a pdf to excel online?

    Hi, Each morning I recieve a bunch of pdf files form my clinet and I need to convert all of them to MS - excel and then use them for further calculations. This is a repititive, tedious and time consuming process. So the idea is to automate the follow

  • Can't see temporary authorizations under Citicard website, works under IE-11.

    When I check online my Citi credit card activity I have the option to check temporary charges(ones that have a hold on your account but not fully charged to you). Under IE-11 it will expand the web page and list all charges not posted to you account.

  • Business object web service

    Does anyone know a reason why you cannot select certain operations like "findall" when trying to expose a business object as a webservice? Regards Dan