I got Cannot Install Drivers. No Intel(R) Adapters are present in this computer

I have a laptop where I have Installed Windows 2008 R2 Server Datacenter edition, the installation went through successfully.
Next I tried to install PROWIN64 which I download from Intel site, to get me access to the Internet. I use Time Warner Cable as my internet provider.
I got another computer with same OS and it works just fine using the Wireless Internet Connection provided my internet provider, this computer has the Intel(R) Centrino(R) Wireless-N 2230 Network adapter.
If I manage to know how to install the Intel(R) Centrino(R) Wireless-N 2230 Network adapter, I think it should work.
If you please let me how to install this Network adapter, that would be awesome!
Thank You!

Hi there,
you're in the wrong forum, but I'll try to guide you.
(a better forum for your question would likely be this:
http://social.answers.microsoft.com/en-us/windows/forum/networking?tab=Threads )
Your RALink wireless adaptor is not manufactured by Intel, that's why Intel driver download won't help you.
You need to go here (RALink is now Mediatek) to get the drivers for your adaptor
http://www.mediatek.com/en/downloads/
Good luck! :)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Cannot install drivers. No Intel(R) Adapters are present in this computer

Cannot install drivers. No Intel(R) Adapters are present in this computer
Cannot install drivers. No Intel(R) Adapters are present in this computer
Reads the error message I purchased an RaLink USB Wireless adapter IEEE 802.11 b installed in an XP Pro system, an Intel D925XEBC2 MB with A P4 CPU 3.80 GHZ
I have 4 gigs of RAM installed but it reads only 2.87 RAM on system properties
I installed the RaLink Drivers and the Ralink interface. I get a strong signal and see that the wifi is there but cannot connect. The 1394 Net adaptor #2 is showing as is the USA wireless card
I was asked to install the PIN which I assumed meant the network security but my keyboard will only input numbers not the letters, otherwise the keyboard operates properly on notepad but not on the RaLink software
Under other devices it shows both the Ethernet controller and the Network controller with a question mark "?".
I have tried uninstalling and starting the computer several times but they will not install correctly.
The windows interface shows no wi fi system at all. After going back and forth now both windows and the RaLink interface shows no wifi system.
When I went to https://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=18717 and downloaded the 32 bit file and tried to install it I got the error.

Hi there,
you're in the wrong forum, but I'll try to guide you.
(a better forum for your question would likely be this:
http://social.answers.microsoft.com/en-us/windows/forum/networking?tab=Threads )
Your RALink wireless adaptor is not manufactured by Intel, that's why Intel driver download won't help you.
You need to go here (RALink is now Mediatek) to get the drivers for your adaptor
http://www.mediatek.com/en/downloads/
Good luck! :)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

HT1461 I have installed the Windows 8 on my MacBook using BootCamp, but I cannot install drivers for Windows now

I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.

Go back to Boot Camp: on the 2nd page you get this:
Download the support software and as Windows is already installed uncheck the 2nd box.

Can anyone tell why I cannot install drivers for my IPOD Clasic

I have iTunes installed and I cannot install drivers for my IPOD Classic while using windows vista 64 bit?

Download the apps on your syncing computer and then sync to the iPod. Note that you can only sync apps for the one syncing computer you use with the iPod. You can manage music and videos among different computer.

I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
Final Cut Studio 2 (Including Final Cut Pro 6)
• A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
• 1GB of RAM
• An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
• A display with 1024-by-768 resolution or higher
• Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
• QuickTime 7.1.6 or later
Additional Recommendations
• 2GB of RAM when working with compressed HD and uncompressed SD sources
• 4GB of RAM when working with uncompressed HD sources
• A display with 1280 x 1024 resolution or higher
Additional Requirements for Motion
• A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
• A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
• For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
Additional Requirements for Color
• The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
• ATI Mobility Radeon X1600
• ATI Radeon X1600
• NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
• For 32-bit rendering: a graphics card with at least 256MB of VRAM.
• A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
• A three-button mouse for full functionality
Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

I need to reinstall my Final Cut Express. I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install. Does anyone know how I can resolve this.

I need to reinstall my Final Cut Express. I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install. Does anyone know how I can resolve this.

If version 4 is an upgrade only, you will have to have the serial number of the 3.5 full version.
If you can't find it try contacting Apple with your proff of purchase, they may be able to help.
Al

When i pluged in my ipod,computer start scanning,it says"your computer is no more authorized for app that are installed in"yadav ipod",would you like to authorizes this computer for item purchased from itune" what should i do to fix this problem,,,

when i pluged in my ipod,computer start scanning,without finishing scan,it says"your computer is no more authorized for app that are installed in"yadav ipod",would you like to authorizes this computer for item purchased from itune" what should i do to fix this problem,,,

What the message says. In iTunes g the the Store tab in ther upper part of the screen and then clink on Authorize this computer.

I synced my iphone to my computer home but i moved to korea and got a mac so how do i sync my phone to this computer because it says I'm already synced to my home computer?

i synced my iphone to my computer home but i moved to korea and got a mac so how do i sync my phone to this computer because it says I'm already synced to my home computer?

See here: https://discussions.apple.com/docs/DOC-3141

SAFARI 6.1.3 update to Reader 11.0.07 - cannot open pdf files that are presently on my computer. Previous version had no problem. Any ideas?

SAFARI 6.1.3 update to Reader 11.0.07 … cannot open pdf files that are presently on my computer. Previous version had no problem. Any ideas? (Here is the message: Adobe Reader could not open 'Digital_Holiday_Cookbook.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Thank you Pat!!!
Craig Ekonomos
[email address removed]

I went to back up my Mac on the same Seagate Free Agent I've been using for a year, but I got a message "the disk you inserted was not readable by this computer." I'm still using Snow Leopard like I've always been. What is going on, and how do I fix it?

I went to back up on the Seagate Free Agent I've been using for almost a year. I got the message, "the disk you inserted is not readable by this computer." What do I do now? How can I fix it?

10.7.4 is not Snow Leopard. 10.7.4 is Lion.
Also, is the drive connected via USB or Firewire?
If USB are there other devices on the USB bus?
Are you using Time Machine, Superduper, Carbon Copy Cloner, or another software?.

I have a 2006 imac i just brought back from the dead when i try to install snow leopard it says i can't on this computer why not

i have a 2006 imac i just brought back from the dead when i try to install snow leopard it says i can't on this computer why not

There is your problem. DVDs that ship with a Mac are machine specific. You will need to purchase a retail copy of the DVD $29.
Stedman

Cannot install Leopard on Intel Macbook

I have an Intel Macbook (2GHz, 2GB RAM, 160GB HD) with OS 10.4.11 installed, and am trying to upgrade to 10.5 with a retail version of Leopard. However, when I attempt to boot from the install disc (which I can successfully do), I cannot install Leopard because of an error message that it "cannot be installed on this machine."
Any help/advice?

pixelinpink wrote:
I have an Intel Macbook (2GHz, 2GB RAM, 160GB HD) with OS 10.4.11 installed, and am trying to upgrade to 10.5 with a retail version of Leopard. However, when I attempt to boot from the install disc (which I can successfully do), I cannot install Leopard because of an error message that it "cannot be installed on this machine."
Any help/advice?
Check out this article:
http://support.apple.com/kb/TS1940?viewlocale=en_US
Is the Leopard DVD a complete retail version (not an update)?
Is your MBP a very recent one? If you you need a very recent version of the install DVD.
Is your HD formatted/partitioned properly for Leopard (GUID, HFS+)?
You may need to backup your Tiger install (SuperDuper or CCC clone is perfect) and then do an erase and install of Leopard on a blank HD. You can always boot into Tiger (as I do) from the backup, and you can migrate from the Tiger BU to Leopard.

Cannot Install Drivers for ZR2440w

I have been trying to install the driver files for my new monitor and repeatedly get one message saying that the files installed successfully, to be followed by one saying that the files did not install. When I try to reinstall, I get a message saying "access is denied."
I've attempted to update the driver directly without success. The computer indicates that it is a generic PNP monitor and the best driver (the windows driver) is installed. It will not install the driver files where they were extracted.
My computer is running Window7 64bit. I have administrator rights, so the work-around for Vista does not apply here.
Any advice is appreciated.

Do you have an alternate monitor? If so, I would try unplugging the ZR2440w and uninstalling the drivers that are currently installed for it. After you do that, reboot the computer. Once the computer is back on, try installing the drivers once again and see if that works.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Cannot install drivers - Access denied (exteral hdd)

Hey there, i have a serious problem with my brand-new exteral hard drive (toshiba STOR.E canvio, it works with usb 3 ''AND'' usb 2). It works fine with my old windows XP laptop.
When i connected it on my new pc, it worked. But i could not find it on My Computer.
Finnaly i found it like an ''unknown external USB 3''. I tried to install the drivers, but i failed. A message appeared: ''Windows found drivers''. But drivers were not installed. The problem:
!!!ACCES DENIED!!!
PLS HELP

Hello! After 4 days of searching and searching, i found the solution.
1. Restart your PC.
2. Before the windows logo appears, press F8.
3. Select Safe Mode.
4. Install drivers.
5. Restart your pc, this time in normal mode.
6. Plug your HDD
7. ENJOY!!!

I got Cannot Install Drivers. No Intel(R) Adapters are present in this computer

Similar Messages

Maybe you are looking for