I got fatal error while updating to 2.2.1
Can't even restore back to the original backup system ? it is looping
force the phone into recovery mode:
restart the phone. (hold down sleep and hold button for 10 secs)
when the screen goes blank: release the sleep button. but keep keep the home button pressed down.
then plug the iphone connector. keep holding the home button and the phone will go into recovery mode. this can take up to a few minutes.
http://support.apple.com/kb/HT1808
you know the recovery mode has been successful because the message will come up in iTunes.
if using recovery mode does not fix your problem take it into an Apple store and let them have a look at it.
note:
I personally would make a copy of your iphone backup if your phone is playing up:
(note that apple does not recommend these files to be tampered with. so please be careful)
located on your mac: ~/Library/Application Support/MobileSync/Backup/
windows xp: C:\Documents and Settings\YOURUSERNAME\Application Data\Apple Computer\SyncServices\Local
Pearce
Similar Messages
-
been using 8330 curve since 6 months, now can't live without my mails on handheld,
certainly push mail and features Iam back to life and business.
but i've a bug report, this hapened twice in two days giving me hours of mail interupptions, thank god it was weekend.
everytime i connect to Desktop Manager(latest version), I get prompt for available updates.
when i start installing it, it fails with a fatal error
I noticed the desktop manager while trying to update the core software turned radio and services off (during backup i think)
but upon fail it didn't revived the service.
Contacted my Operator and they suggested a Hard Reboot, did it many times, phone worked but without BB services,
after many battery pulls sent services books again from myoperator.blackberry....
contact my operator and they suggested hard reboot everytime, or doubted it to be a network outage while it was a bug.
After 8 hours i tried the soft reboot using key combination and WOW it worked. The BB services got restored and mails started coming again.
Iam sure the issue can be replicated and there should be some option available in DM, or update software to re-connect the BB services when a update fails as its very frustrating to get off your mail box and operator may take hours before they figure out what the case.
tech details of my soft.
BB 8330 (CDMA)
v4.5.0.66 (platform 3.2.0.48)
Desktop manager 4.7 with media manager.
If there's a place to submit a bug report or a enhancement request i've a few more things to suggest.
Thanks,check in control panel- add/remove programs.... check if you see Blackberry device software 4.5.x.x
if you dont, this means your carrier is pushing the update to you through the internet
to do this manually, what I would do is download the latest 4.5.0.x software from your carriers site, install it to windows
then dont use deaktop manager, go to c:\program files\common files\research in motion\apploader
run loader.exe and install the update that way -
Fatal error while updating to 10.2
Hi,
I got a brand new Q5 - no apps other than default and there is plenty of memory available (more than the software update size). I am trying to update the device software using BBLink. While updating, it gives me an error "Fatal Unrecoverable error".
I also can't seem to setup the Blutooth device connection between my Q5 and my desktop.
Any help is highly appreciated.Hi and Welcome to the Community!
Given the error you receive, I would first check to be sure you have the most recent version of LINK. Failing that, I would attempt to use the Sachesi method of updating. Failing that as well, I would revert to using an AutoLoader to see if it can accomplish what LINK cannot do. Do be aware that an AutoLoaders are completely destructive to your device data...be sure you have a full backup as well as full manual documentation of your configuration.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
i was updating my iphone4 to the latest version but the error occured while updating the phone and than my phone got frozen with the screen of itunes and usb cable but as i connect it to the computer, its not shown in itunes.same screen is shown
please help me1. Try forcing reboot by holding down the home button and power/sleep button at the same time until the screen restarts.
-- IF THAT FAILS --
Let the phone battery drain. -
I got an error while updating my phone
I was updating my iphone 4 software when I got an error, now my phone has the apple with a progress bar on it.
iOS: Resolving update and restore alert messages
-
Fatal error while updating!!​!
I was updating my software using the desktop manager. At the end it said a fatal error occured and to try again. Now it says there is nothing to update, my laptop can't see my device is connected, my blackberry won't do anything but double blink the red light otherwise it looks off and won't do anything. I'm worried I've crashed it and my phone has been wiped... HELP?
Very good, nice. I would recommend you LEAVE that file where it is.
At the same time, copy it and place it elsewhere on your PC with another name, like "importantbackup.ipd" maybe on your desktop for now. (right click, select COPY) then go to where you want to put the copy (right click paste).
So, your BB will not reboot at all. And you can't re-run the web update service?
Try disconnecting from the USB, close the Desktop Manager and close the Web Update service and then go back through all the motions again. Try it was you did before.
Does DM connect or the Web Update service recognize the BB?
If yes, proceed.
If not, post back and we'll take another route.
What the EXACT model of your curve? 8300, 8310, ?
Message Edited by JSanders on 03-26-2009 04:17 PM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have Windows Vista Premium (64) installed on my pc, never had this kind of problem before. I mostly use this computer only for itunes...
I tried to re-install itunes without success, now it gives a runtime error visual c++ runtime library , says to re-install itunes with error 7 (windows error 1114)
Please help me! thanks !I had the same problem. Use the uninstall feature to delete all of the Apple related programs that came with the recent download. There should be 3. Check the dates they were installed to be sure.
DO NOT DELETE any folders manually unless you want to lose playlists, etc.
Reboot your computer then reinstall. It worked like a charm for me! -
Fatal Error while updating Curve 8310 from 4.2.2 to 4.5.
So, I try to install the 4.5 on my phone...
It connects, wipes the phone, installs new software...but whenever it starts to install modules, it fails towards the end of the first one.
Always.
Any help?
It's a Curve 8310 on AT&T!hello, 507 has been discussed and solved many times on the forum. Please read the following discussions :
http://supportforums.blackberry.com/rim/search?submitted=true&type=message&sort_by=score&advanced=tr...
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Any suggestions?
Download the right ipsw corresponding with your ipod from the link.after installation is done.connect to itunes hold down the power and home button for 15 seconds. when you see the resoe ipod hold down option and finder will pop up. find the ipsw that you downloaded and then click on it and choose open.
http://osxdaily.com/2013/10/22/ios-7-0-3-available-now-ipsw-direct-download-link s/ -
Got This Error While Updating My Ipod
[img]http://web8.twitpic.com/img/119682404-694ff28d355de0d8b1537c44b19938f1.4c220c58- full.jpg[/img]
HELP!Download the right ipsw corresponding with your ipod from the link.after installation is done.connect to itunes hold down the power and home button for 15 seconds. when you see the resoe ipod hold down option and finder will pop up. find the ipsw that you downloaded and then click on it and choose open.
http://osxdaily.com/2013/10/22/ios-7-0-3-available-now-ipsw-direct-download-link s/ -
Hi, I have got an error while updating my WP on lumia 800? the error code is 80070002. how to resole
@RoukailaRedouane
Similar issue raised here with referral to resource below:http://answers.microsoft.com/en-us/winphone/forum/wp7-sync/error-80070002-occurred-when-checking-upd...
More information can be found here:http://support.microsoft.com/kb/910336/en-us
Happy to have helped forum with a Support Ratio = 42.5 -
Error while updating decimal places in general settings
Hii All
I have got an error while updating Decimal places in General Settings
Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
Note : there are no postings yet, a fresh database for a new client
what could be the possible reason
thanks
RIYAZHiii All
As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
would be helpfull if there is any other way..
Thanks
RIYAZ -
I got this error while updating....
http://i54.photobucket.com/albums/g109/Bonesone4/Picture1-7.png
luckily I have all my music and movies backed up already on an external drive...but does anyone have any ideas why this might have happened?
BonesI got this error while updating....
http://i54.photobucket.com/albums/g109/Bonesone4/Picture1-7.png
luckily I have all my music and movies backed up already on an external drive...but does anyone have any ideas why this might have happened?
Bones -
Get Error while update the User defined row table through DSK Code
Hi experts,
I have got an error while updating the user row defined table.
Error is - "Invalid row"
I have created one master table "@CBF_FARM " and Child table "@CBF_FAR1"
First i inserted 5 record in the child table so in my my child table there are 5 Line id (1,2,3,4,5 one for each row).
after that i delete 2 rows (3rd & 4th row) from child table now in my child table there are 3 rows( Line id 1, 2, 5). Please See attachment.
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
Following Code used for updating the user defined child table.
SAPbobsCOM.GeneralService oGeneralService1 = null;
SAPbobsCOM.GeneralData oGeneralData1 = null;
SAPbobsCOM.GeneralDataParams oGeneralParams1 = null;
SAPbobsCOM.CompanyService sCmp1 = null;
SAPbobsCOM.GeneralData oChild1 = null;
SAPbobsCOM.GeneralDataCollection oChildren1 = null;
sCmp1 = clsAddOn.LDNA_Company.GetCompanyService();
oGeneralService1 = sCmp1.GetGeneralService("CBF_FARM");
// Get UDO record
oGeneralParams1 = ((SAPbobsCOM.GeneralDataParams)(oGeneralService1.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)));
oGeneralParams1.SetProperty("Code", oForm.Items.Item("edtFarmCd").Specific.Value);
oGeneralData1 = oGeneralService1.GetByParams(oGeneralParams1);
// Add lines on UDO Child Table
oChildren1 = oGeneralData1.Child("CBF_FAR1");
// Create data for rows in the child table
SAPbouiCOM.Item oItem = oForm.Items.Item("cmbShed");
oCombo = oItem.Specific;
string ShedCode = oCombo.Selected.Value;
ldna_Rec = clsAddOn.LDNA_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
string strQuery1 = "select LineId from [@CBF_FAR1] where U_ShedCd = " + ShedCode;
ldna_Rec.DoQuery(strQuery1);
oChild1 = oChildren1.Item(ldna_Rec.Fields.Item("LineId").Value - 1);
oChild1.SetProperty("U_Status", "Ready For Schedule");
//Update the UDO Record
oGeneralService1.Update(oGeneralData1);
Please Help me it is an urgent requirement,
-Regards
Vikashi.
Error is - "Invalid row"
Now i am updating the last record of child table through Code (Line id is 5) from other form, then i got error invalid row.
As per my knowledge
What i understood is you have 5 lines and you are going to be update 5th line
am i correct..
while u are updating the line in child table
you have to consider like this..
line number u have to update like
1 0
2 1
3 2
4 3
5 4
which means in child table treat
line 1 as 0
line 2 as 1
line 5 as 4
If you want to update the line 5 u have to mention 4 th line -
hi, i just try to update my 3g in itunes unfortunatly it got error while updating it asked me to restore update but unable to restore it , now my 3g i locked and on screen it displying usb symbol connect to itunes ,please help me regarding this
I suspect your error was 1015, not 1051. This usually involves a jailbroken iPhone, use Google to find your solution.
Maybe you are looking for
-
Studio Display Swivel Stand?
Is there such a thing? Ive seen the arm mount things but havent seen any with decent prices. I just got tired of buying LCD's online and at best buy and would come home with dead pixels and such, so I went to ebay and bought one of the 17" studio lcd
-
Append new records for a spool file
Hello, I am running a query and sending the output to a spool file. The query never returns the same data because it is run every 2 hours How can I make the spool to append the new records and not overwrite the old records? Thanks Carlos
-
Is it possible to run nightly deltas from the same source into multiple BW systems (BWD and BWP)?
-
Dynamic types with CL_ABAP_TYPEDESCR
Hi, I have a problem. I want to read out the output_length of dynamic types to evaluate inputs. I do something like the code below. DATA type_ref TYPE REF TO cl_abap_typedescr. DATA elem_descr TYPE REF TO cl_abap_elemdescr. DATA struc_descr TYPE
-
i keep getting an error messsage that reads "the iPhone cannot be synced. An unknown error occured (-54)."