I GOT HP dm4 1203 tu 15 days back.my laptop runs for 1 HOUR:22 MIN.WILL I GET A BATTERY REPLACEMENT?
חאן I puchased HP dm4 1203 tu 15 days back.. i have tried everything but my laptop runs for ONE 1 hour: TWENTY TWO 22 minutes when charged 100% no matter what power plan I use contrary to advertised 6.5 hours ...I BOUGHT THIS LAPTOP BECAUSE OF THIS FEATURE BUT I M GREATLY DISSAPOINTED .. battery status check says my battery is OK.....I WOULD LIKE TO KNOW WHETHER I CAN GET A BATTERY REPLACEMENT..??????????????????????? i would like to add that i DONT watch movies on it .. i just surf net on it..
That thread helped for a time. But now it seems as though my computer is back to slow again. But, some of the jargon is over my head as well. Not sure I knew quoite everything they were talking about. But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again. Thanks so much.
Similar Messages
-
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
I use BB Bold 9790 and my battery which could at least,last for a day now at most,lasts for an hour
I use BB Bold 9790 and my battery which could at least,last for a day now at most,lasts for an hour and half.
The phone heats up so much that I am always forced to plug out the battery always.
Please help cos I love the device!
An more so can't afford to buy a new one cos its a little pricey.Oh, then reread Post 2 please, for the last paragraph gives you options to proceed with. Not knowing which you desire to use, I'll just give you a bunch and you can choose.
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Yesterday, i plugged in headphones, and when i took them out, it said headphones were still in it when i tried to change the volume. Now it cannot play any volume, or take in any volume, unless you have headphones plugged in and the have a built in microphone. Since i got my ipod less than a year ago, will i get a new one for free?
First
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted. -
Just like the above title, my macbook keeps freezing and I keep getting the rainbow cursor. also, is it normal for macbook pros for the laptop and the charger to overheat like crazy with just 20 minutes of usage in?
No need to Multiple Post...
https://discussions.apple.com/message/20933807#20933807 -
I'm on a Mac, and Lightroom comes up with "update available, download now", so I go to download it and find that actually it is a paid for upgrade. So I pay for it, and then have to wait days for Adobe to "confirm" the purchase. It the meanwhile the demo which downloaded itself is saying "trial period over" and said that immediately (i.e. no trial period). How do you get Adobe to respond? I can't get an answer?
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache. If it fails to connect try using a different browser.
Get chat help with orders, refunds, and exchanges (non-CC)
http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 ) -
Someone got my iphone disabled, and when i went to password after it got unlocked i accidently got it wrong, i cant connect to itunes as my charger is broken so im using one without the usb, how long will i have to wait for me to be able to access it or how? thankyou
If it just says that it's disabled, then it will never re-enable on its own. You'll need to restore it:
http://support.apple.com/kb/HT3406
I'm not sure what breaking your charger has to do with not being able to connect your iPhone to iTunes on your computer.
Regards. -
please help
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Since you are new to iPad .......
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
Is this just a bug in the new iOS for iPad 2? Cause I also updated my iPhone 4S to iOS and it shows proper battery levels. Any one else having this issue? If so is it a known issue?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
Also, just use your iPad until it drains of power and then recharge it. It might sort out the glitch! -
Help! My MacBookPro (Intel dual-core 2.6ghz) running MacOS 10.6.8 has decided to emulate a Windows device ... crashes several times a day ... sometimes even several times an hour. Also seems to be running significantly hotter. Any ideas?
Heat can be a big problem.
Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Have you blown the dust out lately? Let it cool for an hour & see if you can get these...
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Also, open console in Applications>Utilities, check the system log for the date/time of the last problem for clues.
Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
Open Console in Utilities & see if there are any clues or repeating messages when this happens. -
Hi
I have started migration système to transfert from hold Macbook pro to New MacBook air
Application starter successfully for several hours.
But since more than 3 hours I got the message "transferring Time zone paramètres " with time left less than 1 minute.
Any recommendation or suggestion to solve it ?
Many tanksIf it has run for 3 hours it's probably done and you can quit Migration Assistant and reboot the new computer. In the future rather than using Migration Assistant I would recommend using Startup Assistant which tends to be a bit more reliable and does not create a new user account as MA does. If you're interested here is an article explaining Setup Assistant tips.
Roger -
I got my battery replace today and must know is the battery health good or bad!
I got my battery replace today and must know is the battery health good or bad!
Here are the datails direct from the ibackupbot Programm
Battery
CycleCount: 231
DesignCapacity: 1420
FullChargeCapacity: 1258
Status: Success
BatteryCurrentCapacity: 78
BatteryIsCharging: false
ExternalChargeCapable: false
ExternalConnected: false
FullyCharged: false
GasGaugeCapability: true
My Phone info
iPhone 5 64GB
iOS 7.1.2
Please I really have to know it!
Thanks in advance!sorry but I get my battery replaced by another local Service store called "http://handy-doktor.info"!
So accourding your answer is my battery not a new one, right??
Thanks in advance! -
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
i got my i phone4s few days back and i created an apple id with a credit card and when i go to the appstore to purchase apps,all have and message stating that "this app is no longer available"..how do i fix this issue?im from singapore by the way
If it is longer available then you can't get the app on your phone.
-
I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?
I tried mackeeper to recover files but it could not. Any other way any one has tried to recover a system library folder after OS upgrade?No, it doesn't store a clone. You would have needed to make one with either SuperDuper or CarbonCopy Cloner.
If the files were in your ~/Library folder then they may still be there. As I said, you can access it by
going to your Finder "Go" menu hold the option key to choose "Library". I wouldn't think an upgrade would overwrite anything in ~/Library.
If you have a Time Machine backup you may also be able to use that to retrieve them.
Maybe you are looking for
-
Jolt client vs. jolt connection pooling
We are porting our app to weblogic. We are current users of jolt but since we weren't using weblogic we are currently using jolt client out of the app server. We are examining the merits of converting to use the jolt connection pool. I have been told
-
Graphic driver troubles in VMWare
I'm trying to run archlinux inside a virtual machine. I've installed open-vm-tools and open-vm-tools-modules, but for some reason X is using the vmwlegacy driver, which doesn't let me use a proper resolution... [ 49.320] (II) LoadModule: "vmwgfx"
-
DVD software that supports adding 24 bit/96 kHz stereo PCM to video
Does anyone know which DVD authoring software supports adding stereo PCM 24 bit/96 kHz files created by say recording using the Audigy 2ZS ?Most DVD authoring/burning software I've seen only seems to recognize/support 48 kHz sampled PCM audio, but vi
-
The window mimimiser has changed from a sigle box to a doulbe bos how can I fix it
the box on the left of the screne to mimimise the window has switched from a single to a double box how can i get it back to a single box
-
Foreign trade - legal control.
Hello, Could you please tell me what skills/informations are needed to configure the Legal control? I mean although I understand the function and know how to configure, I have to read the foreign trade law to map the law into the system. I think the