I got my CS6 serial key, but suddenly it is invalid. Please help.
I got my CS6 Design and Web Premium Edu serial key. When I try to use it to install another components from disc, it said can't verify the key.
The key is authenticated which is already registered in my adobe account.
Please help.
Contact S&T or serial and activation support.
Mylenium
Similar Messages
-
i started my photoshop touch after some while and now i cant find the magnetic lasso tool it used to be there i used it all the time for editting but now i cant find it maybe i disabled it somehow. can anyone tell how to enable it again?
I honestly don't remember a magnetic lasso tool. (I've been using PS Touch since version 1.0.) The closest things I can think of are the Quick Selection Tool, the Scribble Selection Tool and the Magic Wand Tool, all located under the same set of tools (3rd set from the top in the tool panel).
-
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks
Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
Where to find my Serial Number for Photoshop CS6 Extended? The program has been on my computer for at least a year now and for some reason it is now requiring my serial number to run the program. Please help!
Log in into your Adobe account and go to "My Products". You'll find a list of all the products you've ever registered with Adobe.
-
I was filling a form online, then I got to where I had to upload a Microsoft document but when I clicked on upload document I only had the option of uploading photos and videos, but not Microsoft doc. Please help.... How do I upload Microsoft doc and other related office documents?
tis true
I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive* -
I have a case number but have not received my serial number yet after 4 days. Please help.
I have a case number but have not received my serial number yet after 4 days. Please help.
Do you know where I go to do contact Adobe directly, please?
On Tue, May 5, 2015 at 11:06 AM, Barbara B. <[email protected]> -
on start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I purchased an iphone 3g that was to be open to any carrier, I went to restore it to my itunes account and get a 1015 error, can this be fixed. I am new to the iphone and like the product but cannot buy new. Please help. THANKS
You got ripped off. You bought a hacked/jailbroken phone. That's what error 1015 means. Return it and get your money back if possible and buy a phone from a legitimate source.
Discussing jailbroken / hacked phones is forbidden by the terms of service. Jailbreaking / hacking voids any warranty and forfeits your right to support here or from Apple. You can not get help here. -
Hey, I wanna download Lion for free, so i need UP-TO-DATE , but it do not works , please help
Hey, I wanna download Lion for free, so i need UP-TO-DATE , but it do not works , please help
I think you misunderstood the guy. The up-to-date program isn't working for a lot of people. I'm eligible for the free upgrade but it fails to recognise my serial. From what I've read, this is affecting a lot of people who purchased their computers online. Apple seems to be fixing the issue though, so my advice would be to keep trying. Alternatively, click on the manual verificaton link so they can check your order for you and send the redemption code after they do.
-
Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?
I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.
-
I can't update iPhoto 9.4.1 to 9.4.3. Every time I click update, it tells me to sign in to the account I used to purchase it but it was preinstalled. Please help!!!
They are updated through the Software Update facility, not the Mac App Store.
Thanks for popping in....
My iLife apps are all from retail install disks predating Lion/ML; I am running 10.8.4 and as soon as I choose Software Update from the menu, the app store 'Updates" window opens with "checking for updates". I believe that behavior (SU being directed to MAS) was changed with ML? -
I just want to ask if there is any way i can fix my ipod touch 4G from watar damage and i dont think that a larg amount of water have entered and the ipod isnt working at all and i tried charging it but it didnt work so please help me, and thankyou.
Probably dead if you have tried to charge it.
You should never try to charge or turn on a wet electronic device.
You should let it dry for a week or so, then try. -
I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me
Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over. -
how do you get your ipod touch to make a noise when people text you and to pop up on the screen my friend did something to her ipod to do this but i dont know how please help!!!!!!!!!!!!!!!!!!!!!!!!!!! its like she updated it but i already tried it!!!!!!i am very confused and want my ipod touch 4g like that please help thxns:)
Go to Settings>Notifications and turn alerts/sounds on for the app(s) in question. Not all apps have all options.
-
My i phone 4 is water damaged and it is working but network not shown so please help me
my i phone 4 is water damaged and it is working but network not shown so please help me
A replacement iPhone is usually a refurbished iPhone that has received new battery and case and repair of anything that may have been faulty. The refurbished iPhone is indistinguishable from a new iPhone. A number of the regulars on here prefer the refurbished Aplle products because they have been so thoroughly tested.
A replacement iPhone is identical to the original, same color, capacity, and so on.
Maybe you are looking for
-
ITunes error message SIM card not supported after hard restore
Decided to do a Restore of iPhone 4 after several unresolved issues. Everything fine until reboot when iTunes tells me that the SIM card is not recognized. I have found numerous posts and discussiopns about this; I have removed SIM card, restarted, r
-
DAQ and motor control in the same VI
Hello, I am a beginner in labview and I am trying to control a maxon motor and run a NIDAQ at the same time. Basically, I need to measure the pressures and the angles at the same time and record these. The problem that I am facing is that when I exec
-
Hi Guru's, How to delete asset suppose i created asset and posted depriciation for some periods these assets how to delete could you explain me. Thanks Ravi
-
Error deploying SAP ESS and MSS
Hello, I get the following error while I'm updating these BP with JSPM Versions are SAP ESS 633.0.0 and SAP MSS 630.0.0 both versions has been released recently, the day 2011-07-08. ... Error: Unresolved dependencies found for the following SDAs: 1.:
-
How do I put the memory I had in my G4 to my Macbook?
I bought memory for my G4 not to long ago, but now that I have a MacBook I wanted to put that memory on it. I know on the G4 there is a spot on the back where the memory goes, but I don't know where to find it on the MacBook. Any ideas? Can I even tr