I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, HELP
I got my Imac and Trackpad in may so its new and the batterys have run out on the trackpad, so i have put new batterys in and its not even turning back on i have tried the batterys the other way round ( i used duracell) and still not working, so i put the old batterys in and it still wont turn on. I am getting so angry woth apple things, the make it sound better than it is and over pice it, i paid over a grand for my imac and it dont even come with a cd SLOT. Please can some one help!
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.
Similar Messages
-
My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot. Pleaseeeeeeeeeeee help I need my ipod.
The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.
-
I got an error message after trying to upgrade to the latest version of iTunes. I have tried installing via Apple Download (originally did this and it didn't work either of the times I tried), manually tried installing/repairing (gave error message that it couldn't open when it finished), from the apple site (tried repairing and gave exact same error message as manual update), and uninstalled and then reinstalled (took a long time on installing the startup section of the reparing...pretty sure that's where the error is in the update) followed with a restart of my computer...still same error message. If anyone knows how to fix this or if Apple could fix this, that would be great. Error messages displayed:
I updated tonight and ran into two very similar errors.
The first error is your same 127 error and the other error looks like this -
I'm on Windows 8.1
As for what I did, I uninstalled then reinstalled. Same thing. Then I uninstalled everything Apple related on my PC then reinstalled Quicktime then iTunes. Same thing. Then I uninstalled everyting Apple related again then installed iTunes. Same thing.
Hopefully it will be patched soon. -
Why does the iPad 2 run out of memory
Why does the iPad 2 run out of memory?
First ...read deggie's response. Makes sense - even a computer running a large amount of RAM can run short on memory depending upon the operation you are performing so sometimes you have to do what is available to "clear" the memory.
You can ...close apps and restart the iPad on occasion. You close apps by double tapping the home button to bring up your recent apps in the multitasking tray. Tap and hold down on any of the icons until they all begin to wiggle. Then tap the minus signs in the corner of the apps to close them. Close all of your apps in that area. Also take note of how many apps are down there. That may have something to do with why the iPad is running out of memory. Tap the home button twice to return to the home screen. Then restart your iPad by holding down on the sleep button until the red slider appears and slide to shut off. To power up, hold the sleep button until the Apple logo appears and let go of the button.
If you do this once in a while, it may make a difference in how your iPad performs. In any event, it will not hurt anything. -
the other day when iOS8 came out i downloaded it onto my 5th generation iPod, it has been working perfectly fine since, now today when i left it for a couple of hours, it turned itself off and now it won't turn back on. i have tried charging it but nothing is happening. it's not out of charge because the little battery usually comes up when its charging, but the screen is completely black and nothing is happening. i have tried turning it on by both buttons and it won't work. i don't know whats wrong with it. i haven't topped it or anything, so I'm assuming its the new download as it seems to be effecting other peoples devices as well. what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use? Now my ipad is in recovery mode.
Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.
-
My iPhone 4s has tured off and will not turn back on I have only had it a week it has been in the Otter box case the entire time. What do I do to get my phone back on??????
You can try to press the home button and power button and hold them for around 15-20 seconds. This will perform a soft reset similar to pulling the battery. If that doesn't help you may need to restore it.
-
How do I add to my data plan on the iPad once I have run out and no longer have an internet connection? I am working out of the country and got a message that I was running low,followed immediatly by a you're out message.
Should you not be asking your carrier? They are the people supplying your data plan.
-
My IPad screen has turned a weird colour, the background is white and the letters white instead of the other way round. Colour photos look like negatives. How can I turn it back to a white background.
Dear Steve,
You are wonderful! You are the best! I'm Stephania and I recently purchased a refurbished ipad2. I've had it for about 3 weeks now and updating & fixing it so my liking. The only thing that I couldn't correct were the photos that looked like negatives. Every photo, even on the internet, on apps, everywhere! I just couldn't figure out how to fix it. I contacted Apple Care and its too difficult to get in touch with them. I had looked through support before but didn't put in the right question. Well, today I got lucky. I did the two things you suggested and turning the "White On Black" off did the trick. I'm so happy! I had a feeling it was something simple and this is not even in the manual!
stevejobsfan0123 wrote:
Try triple clicking the home button. If that doesn't work:
Settings > General > Accessibility > White on Black OFF. -
I want to back up my iPad so I can changeover to the ipad2 but my pc doesn't have enough memory to allow me to update. I've deleted everything I can in order to get more memory but cannot is there any other way to do it?
I think you misunderstand... iCloud backups are stored in the cloud and not on the PC. So, if you do an iCloud backup, it won't take up room on the PC.
But, if you want to transfer the iTunes purchases over, set up Home Sharing. Also, see this link. -
The Web-Based Email plugin has crashed. I get this message when trying to paste simple text into an email document. I have updated plugins and have run out of options. If I use another browser I have no problem. Please advise.
UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede. -
I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?
If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing -
4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!
Hello there, LaruaGalliers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I need to delete all my photos off my iphone because I have run out of local storage. I have synced with my Mac but also wanted online backup. Are all my photos from the camera roll uploaded to iCloud? I just want to make sure I can retrieve them after I erase from the phone and in case my Mac crashes.
Import photos through iPhoto. (You will prompt to delete from iPhone when import competes).
Backup your Mac. (At least the iPhoto Library)
Backup to iTunes.
Backup to iCloud. (Check in Settings>iCloud>Storage and Backup>Manage Storage>your device name>Camera Roll ON). -
I am trying to download photos off my IPhone as the "Cloud" tells me I have run out of storage space. I have connected my phone to IPhoto on my Mac but when I clik on Import nothing happens. What am I doing wrong?
Help for iCloud storage space >> Managing your iCloud storage
Maybe you are looking for
-
How to use a query in the Print Layout Designer?
I created a query with the query generator: SELECT T0.[Discount], T0.[NumOfDays], T2.[DocNum] FROM CDC1 T0, OQUT T2 INNER JOIN OCTG T3 ON T2.GroupNum = T3.GroupNum WHERE T2.[GroupNum]=T3.[GroupNum] AND T0.[CdcCode] = T3.[DiscCode] The result shows
-
Urgent - How to create instance of Business Object in workflow at runtime
Hi all, I have a requirement as follows... 1) I have a Business Object ISUPOD in which the Key field is Pointof Delivery 2) I am getting the value for Pointof Delivery in the step-2 of my workflow. 3) Now I want to create a instance for the Busine
-
Is there a way to make the photo gallery thumbnails larger? I don't see a way to customize them, it says in the help section that you can click on customize and edit the thumbnail sizes. I don't see a customize button. http://helpx.adobe.com/business
-
Why is the 'Straighten' tool so crude?
Ok, it does what 'it says on the tin', fair enough. But ANY deviation from the original using the straighten tool softens the image drastically. This can be seen by slowly moving the slider back to the 0 position : you will see the image suddenly cri
-
I need help. (format for DB Connect String and Parameters)
I do not understand the DB Connect String or the Other Parameters in the DB Connect String whats the format Can someone point to some help for using the Oracle Reports Paper Report Tester