I got new speaker system and i plug ipod in and try to play music and it wont but it will charge
i got new speaker system and i plug ipod in and try to play music and it wont but it will charge. How do i fix
- Make sure that the iPod is fully seated in the dock.
- Does the manufacturer of the dock say it will work with your specific model iPod touch and its iOS? Not all dock work with all models and iOSs. Users have reported that when the updated the iOS on their iPod and broke compatibility.
Similar Messages
-
Hello there everyone, my Ipod and Itunes on my computer are working fine, but my Ipod is frozen, I can do anything else on it except I cannot play
music on it or play music from a dock on it , please let me know what I can do , thank you !
CamelliaHi all. Never had any problems with iTunes over the past 6 or 7 years but suddenly (in last week or two) I can't play any songs with 10.6.1. I can select songs and get the speaker symbol, but the song does not play and the indicator stays at 0, while the play button is replaced by the pause button, as it normally does when a song is playing. I am using a one year old PC with Windows 7 and have had no other issues. Tried starting iTunes in safe mode...same result.Thoughts? Thanks.
-
IPod Shuffle 4th gen cannot play music and no lights but shows up in PC
I've been using the iPod Shuffle 4th gen for almost 3 months since I bought it at September 2010. Since yesterday, my iPod hasn't been playing musics or showing up any lights, same thing when plugged to computer and it didn't showed up in iTunes neither. Today, finally the light lit up when I plugged it into my computer and showed up in iTunes too. But, unfortunately, I still can't play any music. The light goes off every time I remove my iPod from the computer and it is not responsive to any clicks whatsoever. I've tried restoring the device and syncing all the songs back in, it didn't worked either.
SOME HELP PLEASE? thanksI am having the same problem with mine.
When connected to the PC it seems to be ok. All the light signs are working (sync, battery, etc.). I can access it by iTunes, add or delete music, etc.
But when I unplugg from the PC it will not respond to anything.
I have tried the hard reset and to restore it...no change at all.
Anyone can help!? -
Crackling and popping sound when playing music and watching youtube videos
there is a crackling and popping sound when i watch videos on youtube or play music/videos using vlc media player and windows media player. recently it has gotten to a point where it happens when windows is starting up or even when the laptop is required to play a sound for example when i plug in a removeable hardware such as thumbdrives
Hi @donnabail ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP 2000 Notebook and getting a buzzing or popping sound while playing music and watching Youtube videos. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook that might have caused this.
You can try this
1. Right click the Speaker icon in the bottom right corner.
2. Click Playback Devices.
3. Click Speakers.
4. Click properties.
5. Click the advanced tab on the Properties window.
6. Change the Default Format drop-down to the highest quality.
7. Apply the properties.
8. Click OK to close the properties window.
What happens if you right click on the video while playing a video and take the check out of hardware acceleration. Shut the browser down and restart the notebook.
Have you checked for an update on the Active X.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
! just got a new docking system so i plugged it in to my computer because it wasnt the wall charge type, so I put in my ipod, then straight away my screen went white and now its not doing anything! i press the home and lock button nothing happens... then i plug it in my computer it doesnt come up in itunes or even the copmuter. please help i can not live with out my ipod!
Your post is abit confusing, especially on getting those weird messages and emails,( assumed in your Windows machine.)
Most likely you have Restored the iPod using the new Macbook pro, using the same name as that in your Windows machine, hence the duplicate name warning, as it is trying to sync Automatically.
If you are syncing your iPod to both the Mac and Windows, you must set it to Manually Manage Music, in the first machine that you setup iTunes with the iPod. Read thsi Apple Support Article
In iTunes, Preference, tick on Prevent devices syncing automatically
Hopefully your music are still in both your iTunes library,
Connect the iPod to the Mac
Restore it (just to fix any filesystem corruption by the Windows end)
Set it to Manually Manage Music
Sync your selected songs in your library.
Whern sync complete, Eject it
Connect it to your Windows PC.
Select the song in the library
Sync it.
It should work if your ipod Hardisk is not giving any problem.
Good luck! -
I was loading the new operating system to my 4s iphone
I had to remove my music to have enough space
I clicked on the box that said sync music to computer and remove from phone.
The only music saved was the ones bought on itunes where did the others go
This is a new imacFor music that you've purchased from Apple that are on your iPhone you should be able to copy to your computer's iTunes via File > Transfer Purchases. Also if you are in the US then you should be able to re-download past music purchases for free : http://support.apple.com/kb/HT2519
For your own music that you've copied, then if you haven't got a backup on, for example, external drives or CDs/DVDs then you could see if any of the utilities mentioned in this old post still exist and work -
can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?
Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.
-
I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore. It never dropped or anything
Try here:
iPod touch: Hardware troubleshooting
You said you restored the iPod. Was the restore successful, that is, it went though all the steps without errors?
Try a restore to factory settings/new iPod if yuhave not doe so so far.
Are you using the headphones that came with the iPod? Are you inserting the plug fully
Have you tried another set of headphones in the iPod?
The speaker is not that loud. -
I just got a new iPod and computer, and when I logged into my iTunes account my music and movies were there but none of my apps were. How do I get my apps back?
See:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I just tried to upload the new operating system for my I phone 4s , I get to the terms and conditions, when touch "agree" it opens up and I touch agree again and it closes and nothing more happens
Reset and start all over again.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Just got NEW Apple TV, The status light went out during final part of setup and it no longer works
Just got NEW Apple TV, The status light went out during final part of setup and it no longer works. Any ideas?
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore. -
Why do I see "Blocked Plug-Ins" when I try to play a video - this is generally on the BBC News website. I haven't tried elsewhere.
I have an old Mac 2009.Hello alymarvellous,
Take a look at the article linked below, it provides information about the plug-in alert that you’re seeing when browsing specific websites on your iMac.
Safari 8 (Yosemite): Safari troubleshooting
Problems with plug-ins
If a webpage has trouble showing plug-in content such as video, you may see a placeholder with a button that describes a plug-in problem. For example, the plug-in might be old, missing, or blocked.
Try clicking the placeholder button to resolve the problem.
For more information, see If a plug-in is missing and If a website has plug-in content.
Cheers,
-Jason -
My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?
Use the same Apple ID and password for purchasing in all these devices.
-
I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can
If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple -
My ipod touch 4 generation wont charger or connect to my computer but it will charge using a wall charger. The battery was dead so I plugged it in to the Computer and it charged it enough to come on and now that it is on, it wont charger or register. My sister has the same ipod as me and has no problems charging hers on our computer. Please Help me!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Embedded images are coming as attachment
Hi, While creating mime message we are setting the headers such as content-disposition as inline but still the images are coming as attachment.
-
Adding custom field in pricing condition structure (BADI CRM_COND_COM_BADI)
Hi, I need to add a custom field (ZCITY) to the structure : CRMT_ACS_H_COM and I need to populate this field in the BADI: CRM_COND_COM_BADI in the method : HEADER_COMMUNICATION_STRUCTURE. However, my concerns are: 1. How to add the new field to this
-
Select statement performance improvement.
HI Guru's, I am new to ABAP. I have the below select stement 000304 SELECT mandt msgguid pid exetimest 000305 INTO TABLE lt_key 000306 UP TO lv_del_rows ROWS 000307 FROM (gv_master) 000308 WHERE 000309
-
Hello I used the thread to sort a JTable in Chinese : http://forum.java.sun.com/thread.jsp?forum=16&thread=369970 First, fsato4 (from the thread) says : The array java.text.CollationKey[] generated from the method getCollatingKey of the class Collato
-
I'm using a tabular form. My image is displaying correctly. I just want it to display in a new window. The code I'm using to display the image is listed below: CASE WHEN nvl(dbms_lob.getlength(p.photo_name),0) = 0 THEN 'No Photo Available' ELSE '<a h