I got problem to restore my iPod
Hello everyone...I need your help....My iPod (iPod color display 20GB)could not be restored even when I have already used the latest version of the software. There is always `The iPod `iPod` could not be restored. An unknown error occured (1418)` popping up on the screen. if somebody can help me please!
Have you had a chance to look at this troubleshooting page? It may be of some help: Error 1415, 1417, 1418, or 1428 when restoring or updating an iPod in iTunes 7 or later
Similar Messages
-
HT1339 Problem in restoring my iPod
hi
i am having problem in restoring my ipod, i have tried all the possible solutions given on ur site
but still i am recieving errors "The iPod "iPod" could not be restored. An unknown error occured(1439)".
please help meIt could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock -
HT201418 I have got problem to restore photos from back up
I Have got problem for restoring
Since you didn't state what the problem is, you can take a look at the links below.
Get help restoring from an iCloud backup - Apple Support
iCloud: iCloud storage and backup overview
My Photo Stream FAQ - Apple Support
Get help using My Photo Stream - Apple Support -
Problem to restore my ipod...
When i press on restore it say : Failure of the setting update of the internal program. Clerical error of the disc..
I cant listen to music anymore and cant do nothing with my ipod... can anyone help me plz
Windows XP ProYea, try buying a Sony MP3. My children have an Ipod each and I am still trying to sort out problems. It is 2 am and I am currently vowing never to buy anything from Apple again.
-
Problems with restoring idevices
I have found a solution to the problem with restoring Your Ipod touch and iphones on a Mac, When it stops restoring the device at the very end.
To fix this problem, boot using your OS disk and verify your disk and permissions and then repair them. Restart your computer and see if it fixes your problems.Hardware failure, you'll take your phone to Apple.
-
Lost photos and videos after a restore on ipod touch
I forgot my ipod touch passcode while out of town. I visited the apple store for help and they restored it to factory settings and recommended that I restore it from my itunes account when I returned home. In the mean time, I took amazing photos in a foreign location. When I got home, I restored my ipod and, after it synced, learned that my amazing photos had been deleted during the restore. Is there any way to recover those photos/videos? Please help!
Not now. There was chance before you restored your iPod on your computer.
-
Went to update the ipod touch and it wiped out everything , Itunes keeps trying to restore it but fails everytime giving me an error that it cannot see my ipod yet it sees it and tries to restore it everytime i connect the ipod to the pc , the help file suggested i reinstall the latest version of I tunes so i did i tried using different ports on 2 computers and also bought a new connection cable but still won't restore can anyone help?
Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?
Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?
-
Problem restoring my iPod - "Resource was not found"
My iPod hardrive is a little bit dodgy (to say the least.) When I try to connect it to my computer, it comes up with an error message that says "ITunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod."
So I restore it, but then another message pops up that says "There was a problem downloading the iPod software for the iPod “iPod.” The requested resource was not found." and then iTunes stops recognizing my iPod.
Any suggestions?i was also having the same problem. i seem to have fixed the problem but time will tell.
here is what i did.
1. you have to get rid of itunes 7. i did a lot of reading on the internet looking into error 1418 and 1429 and this is happening to a lot of people after they do the software update. trash everything except the itunes music folder, (where all of your mp3's a stored. don't empty the trash until you have your old songs back on your new old version of itunes 6, just to be safe.
2. find a download for itunes 6. not the easiest thing in the world but you should be able to find it on a bit torrent or ask a friend that might still be running on that to send you a copy.
3. you can try and restore your ipod with the old ipod updater that comes with itunes 6, (2006-01-10). it might not work the first time, it might not work after several. but at least give it a go. mine would update sometimes but then when i tried to play songs on it later it would just tear through songs and not play anything.
4. open up your disk utility program. i ran a repair permissions and repair disk first, both times i got a message saying there was a bad btree situation going on. if you don't get this message, i suggest trying to restore it again before you go to step five.
5. you are going to have to completely erase the **** thing. choose erase and pick the default option that comes up (mac os extended (journaled))
6. your ipod is going to be in disk mode now, don't trip out.
7. run the ipod updater again. once again, mine wouldn't allow me to eject the ipod once it was done so i just restarted it.
after all this, it opened up itunes and asked me to name my ipod. everything has been cool now since this morning. good luck! -
Before I restored my ipod, I backed it up then I updated and restored. The problem is when I went to put everything back on it, I got a message saying that an error writing to the device, can not sync. Then another message appeared saying that "the required disc can not be found. Now what do I do?
Try resetting the iPOd. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Also, delet the iPod Phot Cache folder for the second error. For its loation see:
iTunes: Photo sync creates iPod Photo Cache folder -
its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.
If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d -
I am trying to restore an ipod to the factory settings. However I get a message that my username or password is incorrect. I am using my correct Apple id and password. What is the problem, please?
Was that Apple ID and password the original owner of the iPod? If not, try using the Apple ID and password of the original owner.
-
My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?
first try:
iOS: Device not recognized in iTunes for Windows
next
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
My ipod 4g keept crashing so then i read on this website to go to settings and rest everything. And when i did everything on my ipod got deleted.I tried restarting it but i didnt restore my ipod before so everthing got erased. How can i get it all back???
Restore from backup if you have one:
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
When i try to restore my ipod i recieve an error message saying that "problem downloading softwar for the ipod owner's ipod. error (-23) Please help i need to restore because my daughter somehow set a passcode lock on it and didnt know it and does not know passcode.
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Maybe you are looking for
-
How can I get my school district approved to be a part of the iTunes U?
I just found out that I was denied entrance in becoming a Public Site Administrator. Here's what the email says: Thank you for submitting your recent application to become an iTunes U content provider. Based on the iTunes U requirements for inclusion
-
Problem with ORA-19025 when joining tables
I am querying a table that stores xml datata in an xml column. I an query this column without problems. If I join the table with another table (not xml). I get the error below. ORA-19025: EXTRACTVALUE returns value of only one node 19025. 00000 - "EX
-
Need migration and upgrade info.
Hi I'm currently running CF 4.5 on a NT4.0 box. I need to migrate to a box running Windows 2003 Server. Can anybody help answer the following questions? 1- Does CF4.5 support Windows 2003? If not, what is the lowest version of CF that supports 2003 a
-
Hi, I have managed to transfer data from 'Read Measurement file' and am able to graph it. However, I was wondering how do I shift waveform on the x axis or y axis. I know one way is to change data from the LVM file but is there any VI that I can use
-
Scaling of text outlines in svg format
I'm in need of a solution for scaling text outlines in an svg format. I'm working on developing a Flash app that allows users to type in Flash text with an outline that is then exported out in an svg format. When user then scales the resulting svg fo