I got problem with E3500 while booting...

Hi,
I hv E3500 system and it has 4 disks. i connect through hyperterminal and booting the system it show the below error:
{6} ok boot disk1
Boot device: /sbus@2,0/SUNW,socal@d,10000/sf@1,0/ssd File and args:
Can't open boot device
{6} ok
and i tried to boot boot alternate disks also but does not help. when type show-disks :
{6} ok show-disks
a) /sbus@3,0/SUNW,fas@3,8800000/sd
b) /sbus@2,0/SUNW,socal@d,10000/sf@1,0/ssd
c) /sbus@2,0/SUNW,socal@d,10000/sf@0,0/ssd
q) NO SELECTION
Enter Selection, q to quit:
even i set nvalias for b and boot form that disk still it show same problem...
then i booted single user mode using cdrom and it booted to single user mode there i typed format command then its show disks found.
# format
Searching for disks...done
No disks found!
please see below printenv on ok promt:
{6} ok printenv
Variable Name Value Default Value
disabled-memory-list
disabled-board-list
memory-interleave max max
configuration-policy component component
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
sbus-specific-probe
sbus-probe-default d3120 d3120
mfg-mode off off
diag-level max max
powerfail-time 0 0
#power-cycles 1426063446
fcode-debug? false false
load-base 16384 16384
boot-command boot boot
auto-boot? true true
watchdog-reboot? false false
diag-file
diag-device disk disk1 disk diskbrd diskisp dis ..
boot-file
boot-device disk1 disk diskbrd diskisp dis ..
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? true false
nvramrc devalias disk3 /sbus@2,0 ...
security-mode none
security-password
security-#badlogins 2684354560
oem-logo
oem-logo? false false
oem-banner 3062608489 20:11:27 01/2 ...
oem-banner? false false
hardware-revision
last-hardware-update 00 00 00 00 00 00 00 00 ...
diag-switch? false true
{6} ok
{6} ok banner
5-slot Sun Enterprise E3500, No Keyboard
OpenBoot 3.2.29, 2048 MB memory installed, Serial #12036399.
Copyright 2001 Sun Microsystems, Inc. All rights reserved
Ethernet address 8:0:20:b7:a9:2f, Host ID: 80b7a92f.
{6} ok
Can any one know this problem...and why is not recognize my disks???
Pl post answers asap..
thx...

Hi Michael,
See the output of probe-fcal-all:
{6} ok probe-fcal-all
/sbus@2,0/SUNW,socal@d,10000/sf@1,0
/sbus@2,0/SUNW,socal@d,10000/sf@0,0
{6} ok
Please let me know what to do next step..thx
Regards,
ras...

Similar Messages

  • After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
    2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

  • HT1338 I got problem with my mac bookOS X Lion 10.7.5  web safari can't loading , same with my ,app store. can some give me solusion.

    I got problem with my connect wit server using app store, safari and update software. Keep loading and failed can't connect to server. please gime me solusion. I can use only using firefox and chrome

    Power off the router. Wait awhile. Power it back on. Wait until all the lights are lit up properly.
    It will take a while.
    Restart the computer.
    Start up in Safe Mode
    http://support.apple.com/kb/PH11212
    Deselect Proxies if selected.
    Safari > Preferences > Advanced > Proxies:
    Click "Change  Settings" button.
    The network preferences window for Proxies will will show up with "Proxies"
    tab selected.
    Under "Select Protocol", uncheck any box if selected.
    Click "OK", then  "Apply"

  • Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing  works .

    Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing  works .

    Yea i tried in disk utility and its got faiiled and the partitation has deleted and when i tried  to replug the  usb  msg show up by saying  usb not compaitnle. With this mac  and  take me to disk utility  and thanks for replying

  • TS3274 its almost 10 months,i purchased ipad2 32 3g wifi.itinially i got problem with applications shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs freq

    its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.

    If you have followed the standard Apple troubleshooting processes (see user guide )
    probably a trip to the local Apple Store Genius bar is called for before warranty runs out
    Assuming the iPad has been released in your Country if not you may have to take it to a
    neighbouring Country where it is available
    This page will tell you ,via the drop down menu Countries that can support iPad
    http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d

  • I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

    I installed Mavericks yesterday and have now got problems with QuarkXpress 9. Every time I click on an image and try to move it the application crashes. Anyone had similar problems or got any suggestions?

    Hi Guys
    Updated my 2 imacs to Maverick yesterday. Schoolboy error on my part not checking if there were problems with any programmes before I did.
    Quark is now a nightmare with no short term answer on the way. As a Quark user for over 20 years this is just another reason to hold your hands up and say OK Indesign you win I will have to learn how to use you and Quark will be a distant memory.
    I am told there will probably be no solution to getting quak 9 running on Maverick and that you will need to update to 10 in about 2-3 weeks to get back to normal. Having spent a few bob on 2 versions of 9.5 only in Feb this year i didn't really want to upgrade yet.
    So its cough up to carry on using Quark or learn Indesign.
    I have lost faith in Quark as they are quick to send me e-mails asking me to upgrade to this and that version, why didn't they send one out saying do not upgrade to Maverick. Perhaps they know there loyal follwing will uograde to 10 and will generate a nice little bonus before Xmas.
    Lots to do today and will now take 10 times longer to do it. Is this 2013 or 1974!!!!!
    If anyone hears of a solution please post ASAP

  • After upgraded ios6 i got problem with whatapp. "last seen" function is not working

    HI eveyone
    after upgraded ios6 i got problem with whatapp. "last seen" function is not working .. it's doest show last seen who enter the chat . is anyone have the same problem .. i even restore and reinstall to my ph but it's  not work .. if someone know how to fix it, plz tell me how to do .. thanks

    Also, when I check this post several times a day, I always see warning 'Connection is untrust'. If I close browser and reopen immediately everything is ok.

  • I bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

    i bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

    Not quite what I heard when I went into the Apple Store in Hong Kong yesterday.
    I have just bought an iPad in Hong Kong but will eventually be travelling back to the UK.
    Louis in the Apple Store told me that iPads without cellular have international warranty but those with cellular do not (as there are slightly different models for different carriers).
    But he was pretty cagey and essentially couldn't give a clear, straightforward answer. Which most Apple employees can't.
    It is now a grey area, at the discrection of each local Apple Store & is subject, it seems, to you paying the import duty as a possible get out clause.
    Look carefully but do tell us if you got this iPad reapired. Thanks.

  • I got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

    i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s

    Did you fix the problem? I have the same problem and it has been pain in the neck.

  • I have got problem with my pc-cam 950 slim

    I have got problem with my pc-cam 950 slim. When I press the power button, the busy light goes on for seconds then it is shut down again so the camera doesn't work. Please help me with this problem. I tried to connect it to my PC put it didn't work either.
    Thank you for taking the time to help me.

    Originally Posted by Colin-CL
    Hi,
    Have you checked that you have put in brand new 2 x AAA batteries?
    Connecting it to your PC will allow you to use it as a mass storage device after installing the relevant operating system (Microsoft
    hi,
    Yes, I put two new batteries
    When connected to the computer nothing happens
    What can be done to reset it?
    By replaced capacitor problem can be solved?

  • Hi all, I got problem with my Safari!?

    Hi all, I got problem with my Safari, same with Google Chrome, when trying to block pops-up. It's already ticked on BLOCK but everytime i click on new link, an annoyed pop-up appeared (game online, Mackeeper ...), any advice?

    There is no need to download anything to solve this problem.
    You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Malware is always changing to get around the defenses against it. In addition to, or instead of, the files listed in the support article, you may need to remove the following items:
    /Library/Application Support/dot
    /Library/LaunchAgents/com.dot.agent.plist
    /Library/LaunchDaemons/com.dot.daemon.plist
    /Library/LaunchDaemons/com.dot.helper.plist
    /System/Library/Frameworks/v.framework
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates
    if it's not already checked.

  • I got problem with my ip4s lcd..how much it cost to replace it

    i got problem with my ip4s lcd..how much it cost to replace it

    Sorry, but replacing the LCD screen is no option for the iPhone 4s. This can only be done with the iPhone models 6 and 5.
    Apple will replace the whole unit if you are paying the service fee for the other models.
    Screen repair service pricing
    Repair and replacement costs depend on your iPhone model and your AppleCare product coverage. Apple will run a diagnostic test to determine whether your iPhone has experienced additional damage. If it has, or if it needs other repairs, you may need to pay an out-of-warranty service fee. Accidental damage isn't covered under the Apple One Year Limited Warranty.
    Model
    Screen repair cost
    iPhone 6
    $109
    iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5
    $129
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing. Pricing and terms vary for service through an Apple Authorized Service Provider.
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    Out-of-warranty pricing varies for Apple accessories such as adapters and Apple iPhone cases. Contact your carrier, Apple, or an Apple Authorized Service Provider for more information.
    copied from Service Answer Center - iPhone

  • Compilation problem with templates while using option -m64

    Hi,
    I have compilation problem with template while using option -m64.
    No problem while using option -m32.
    @ uname -a
    SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
    $ CC -V
    CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
    Here is some C++ program
    ############# foo5.cpp #############
    template <typename T, T N, unsigned long S = sizeof(T) * 8>
    struct static_number_of_ones
    static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
    static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
    template <typename T, T N>
    struct static_number_of_ones<T, N, 0>
    static const T m_value = N;
    static const unsigned long m_count = 0;
    template <typename T, T N>
    struct static_is_power_of_2
    static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
    template <unsigned long N>
    struct static_number_is_power_of_2
    static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
    int main(int argc)
    int ret = 0;
    if (argc > 1)
    ret += static_is_power_of_2<unsigned short, 16>::m_result;
    ret += static_is_power_of_2<unsigned int, 16>::m_result;
    ret += static_is_power_of_2<unsigned long, 16>::m_result;
    ret += static_number_is_power_of_2<16>::m_result;
    else
    ret += static_is_power_of_2<unsigned short, 17>::m_result;
    ret += static_is_power_of_2<unsigned int, 17>::m_result;
    ret += static_is_power_of_2<unsigned long, 17>::m_result;
    ret += static_number_is_power_of_2<17>::m_result;
    return ret;
    Compiation:
    @ CC -m32 foo5.cpp
    // No problem
    @ CC -m64 foo5.cpp
    "foo5.cpp", line 20: Error: An integer constant expression is required here.
    "foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
    "foo5.cpp", line 36: Where: Specialized in non-template code.
    "foo5.cpp", line 26: Error: An integer constant expression is required here.
    "foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
    "foo5.cpp", line 37: Where: Specialized in non-template code.
    "foo5.cpp", line 20: Error: An integer constant expression is required here.
    "foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
    "foo5.cpp", line 43: Where: Specialized in non-template code.
    "foo5.cpp", line 26: Error: An integer constant expression is required here.
    "foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
    "foo5.cpp", line 44: Where: Specialized in non-template code.
    4 Error(s) detected.
    Predefined macro:
    @ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
    @ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
    @ diff log32 log64
    7c7
    < #define __TIME__ "09:24:58"
    #define __TIME__ "09:25:38"20c20
    < #define __sparcv8plus 1
    #define __sparcv9 1[snipped]
    =========================
    What is wrong?
    Thanks,
    Alex Vinokur

    Bug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
    If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
    Otherwise, you can check for new patches from time to time at
    [http://developers.sun.com/sunstudio/downloads/patches/]
    and see whether this bug is listed as fixed.

  • Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

    hi..
    i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

    See this: http://support.apple.com/kb/TS1559
    If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

  • Hi. I have got problem with my ITunes. Every time I´m opening the program I´ve got the message: One unkwown problem is appering (-42032) Can anybode please tell me what to do wit this error? Thanks

    Hi. I have got problem with my ITunes. Every time I´m opening the program I´ve got the message: One unkwown problem is appering (-42032) Can anybode please tell me what to do wit this error? Thanks

    Gary,
    discussions may sometimes be slow for an hour or so (at which point the opening page of discussions will eventually apologize for the inconvenience, back on line soon...) but your description looks like a cache problem.
    Try OnyX freeware to do some cleanup and see if that helps.
    http://www.titanium.free.fr/index.html

Maybe you are looking for

  • In two page view preview shows the first page on its own

    In two page view preview shows the first page on its own. I have recently downloaded an ebook which has image based tutorials and the pages are in such a way that pages 3 and 4 should be seen next to each other. Preview seems to want to have pages 1

  • Why Can't I install Adobe Flash Player? Please Help!

    I have Windows 7 and my laptop is fairly new. I want to install Adobe Flash Player because when i go to Youtube it just shows a black screen for videos, Facebook doesn't load completely, when i go to google images, If i type in the most basic search

  • Reflection E ParametrizedType

    public class GenericHibernateDAO<T,ID extends Serializable> implements GenericoDAO<T,ID> {     private Class<T> persistentClass;     private Session session; public GenericHibernateDAO() { this.persistentClass = (Class<T> ) ((ParameterizedType) getCl

  • Music not appearing on iphone

    I Purchased Goldfish - Organic House but the album Only shows 1 song out of 22 In the artists section on Iphone5s on IOS8. When selecting the albums tab the album doesnt exist. When i type in Goldfish in the search tab in the artist section all the s

  • Order related billing for manufacturing

    Can anybody explain to me the effects of order-related billing in manufacturing? What if deliveries is not the same as sales order. Or should i just make another order type for this? Thanks in advance!